|
Welcome
|
You have to register before you can post on our site.
|
|
|
ASUS Z9PE-D8 WS: NVMe m.2 support
|
Posts: 8
Threads: 1
Joined: Dec 2011
Reputation:
0
(06-23-2019, 02:30 PM)Lost_N_BIOS Wrote: You're welcome! If you do need anything else modded in that BIOS let me know
Can you please reupload link to customized bios.
Qustion: will it work with Dell Quad m.2 card, I need to work in full 4x4x4x4 on x16 pcie bus?
Thank you
Posts: 10,256
Threads: 3
Joined: Oct 2011
Reputation:
540
Hi friend, i can add the NVME support then we have to check the bifurcation ...
Please use this tool, run it as Admin and upload the result file here :
https://www.mediafire.com/file/4s2lp3ig8...0h.7z/file
let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use ! 
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10,256
Threads: 3
Joined: Oct 2011
Reputation:
540
05-25-2021, 06:24 PM
(This post was last modified: 05-26-2021, 07:47 AM by BDMaster.)
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10,256
Threads: 3
Joined: Oct 2011
Reputation:
540
05-27-2021, 02:43 AM
(This post was last modified: 05-27-2021, 02:44 AM by BDMaster.)
Ok friend,
I thinked you followed the discussion about your board on all forums.
So the files i provided are originally for the SPI Programmer CH341a, but is possible to flash it using AFUwin64.
It's better to make a bios backup fo safe , so use Afuwinx64 v3.05.04 and make a bios backup, then post the original stock file and i will make a bios mod
NVME using the new module NvmExpressDxe_4.ffs and upload here.
Flash back them using AFUwin64 like Fernando explained here :
https://www.win-raid.com/t455f16-Guide-H...ml#msg7171
https://www.win-raid.com/t6050f16-Reques...#msg104663
So method is decapsulate bios , then modify the rom bios, flash before the .CAP file and then the .ROM file using Afuwinx64 v3.05.04 ...
https://1drv.ms/u/s!AjMjdZ6bIhRQhIxwSu9R...g?e=ovddKI
afuwinx64.exe .CAP
afuwinx64.exe .ROM /GAN
I thinks Flashrom too it needs to work too, as it works on SPI lane, but i didn't read about tests on this pc.
So now let me get a link to your original stock bios version or upload it and i will use it to modify for you, but you have to use Afuwinx64 v3.05.04
to get a bios backup for safe, with your data ...
afuwinx64.exe backup.rom /O
Let me know
Regards
P.S. you can use the Bios Mod files uploaded too, but i don't know if these were took as backup from a own pc.
so you will risk to make a cloned pc
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 8
Threads: 1
Joined: Dec 2011
Reputation:
0
06-15-2021, 10:16 AM
(This post was last modified: 03-07-2023, 11:49 AM by DeathBringer.)
Hello BDMaster, thank for patience with me. I got secondary cpu replacement and also installed windows on secondary drive instead of my gentoo linux to be able properly use bios flash software The output backup file is here:
https://www.mediafire.com/file/xt451hohn...p.rom/file
I can now quickly upload mod. I also went trough all links you provided, thx a lot.
@BDMaster, any chance to mod the bios I uploaded in last thread? Thx a lot.
Posts: 10,256
Threads: 3
Joined: Oct 2011
Reputation:
540
Hi friend,
Your bios backup show the NVME Module , so you flashed well the bios mod and i cannot make nothing else ...
https://www.mediafire.com/file/tmx77rwfl...E.rar/file
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 6
Threads: 1
Joined: Jan 2012
Reputation:
0
(05-25-2021, 06:24 PM)BDMaster Wrote: Here you go , Z9PED8 WS NVME Mod :
https://www.mediafire.com/file/qlsqr7a98...3.rar/file
https://www.mediafire.com/file/g7brja3wp...4.rar/file
let me know
Regards
Hi there,
Please can someone explain why there are x2 files nvme3.rar & nvme4.rar?
Is that something to do with a 16x single NVMe, 8x dual NVMe strip or mirror & 4x raid striping and mirroring quad PCI-E setup?
Thinking nvme4.rar is for the latter, but that's a guess as there no readme docs in those zips
I know this is an old thread , But I'm hoping someone can guide me a bit on getting my Z9PE-D8 WS bios fully up to date, as Asus abandoned support years ago.
I've now got the required SPI Programmer CH341a and a handful of Winbond W25Q64FVAIG chips for flashing, as not to brick the original.
Still seeking the correct software tools to complete the task ahead..
Out of interest are there any other known worth while upgrades that can be done to this BIOS?
|
Users browsing this thread: 1 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
ASUS Z9PE-D8 WS: NVMe m.2 support
![[Valid RSS]](valid-rss.png "Validate my RSS feed")
