K7VT4A+

[dope!]

Asrock K7VT4A+
AMI 0700 Bios
http://europe.asrock.com/downloadsite/bi...(1.30).zip
required ASUS_FLASH SLC
ASUS MSFT SLIC 2.1 if possible

how is it possible to mod the asrock 0700 ami bios?

[DMAN999]

That's a Core 7 AMI Bios.
You can try an SSV2 Mod but it's a bit risky.

[dope!]

is there any way to do the mod with amitool1.61, amimmwin.exe or MMTool2.22.1 in a manual way?
Or should I simply use DMICFG for the SLP, cause SLIC doesn't make sense on this board.

With the amitool1.61 it shows

but stops at module 02 written. The Log shows:

Extended headers are present
8 bit checksums in extended headers
Bootblock at 3C000 length 4000
NVRAM at 3A000 length 2000
Main BIOS checksum is correct

I'd really prefer not to take an unnecessary risk if possible.

That's a Core 7 AMI Bios.
You can try an SSV2 Mod but it's a bit risky.

[DMAN999]

I'm not experienced with Core 7 Mods.
The only person I know that has worked on them is andyp (who wrote the SLIC Tools).
But maybe 1234s282 or someone else here has some experience with them.

[1234s282]

Here you go , i used Asus SLP And Asus 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Asrock%20...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin