Posts: 29
Threads: 2
Joined: Aug 2009
Reputation:
0
10-26-2009, 09:57 PM
(This post was last modified: 10-26-2009, 10:34 PM by Best8845.)
Busykid508: I have troubles using RWEverything. Otherwise, I will provide the necessary information for you. For some reason, whenever I launched the program, the whole system hangs at the splash screen regarding how "fresh" my OS is, or what OS I'm using.
1234s282: As long as others did not modify the checksum in the INI file, the BIOS will not flash the SLIC table. No flashing will occurred if they are on Version 1.22 Before MOD... therefore, bricking will not happened if they just downloaded and flashed as it IF AND ONLY IF they are on Version 1.22 Orginial BIOS already.
There are 4 MODS available in this thread.
All will flashed with no problems IF AND ONLY IF it is flashed as is AND it is currently BIOS version 1.22 before MOD.
If you modify the BIOS CHECKSUM entry in BIOSHEADER INI file, here are the results...
RESULTS
BIOS FROM
Post #7: Fujitsu SLIC by busykid508
- FLASH = OK after changing CHECKSUM in BIOSHEADER file
- BOOT = OK POST, OK into WINDOWS
- SLIC = FAILED.
- SLIC CHECKED BY SLIC DUMP KIT shows ERRORS.
Post #11: Fujitsu SLIC by 1234s282
- NOT TESTED
Post #13: Fujitsu SLIC by 1234s282
- NOT TESTED
Post #17: HP SLIC by 1234s282
- FLASH = OK after modify CHECKSUM in BIOSHEADER file suggested by rbjack
- BOOT = Will not get pass POST screen. CONSIDERED it BRICKED...
- SLIC = UNKNOWN, no chance to CHECK
FUJ SLIC by rbjack
- FLASH = OK
- BOOT = OK POST, OK into WINDOWS
- SLIC = SLIC 2.1 according to SLIC Dump Kit
- Pending permission to post the link from rbjack. I've already PM him about it.
Original BIOS from Fujitsu
- SLIC 2.0 is the default table loaded.
- SLIC 2.1 is hidden by something... but full SLIC 2.1 is available already inside the BIOS
- Worth to check if activation works before trying any MOD