Asus Rampage III Extreme ZioMod Bios (Latest: 1601_S17)

[ZioGTS]

I'm sorry to hear that, you're the first one reporting issues with S06. Just use the bios flashback procedure as described in your R3E user manual, or simply flash the original bios from Asus website.

[edy4414]

Hello Zio, I made downgrade but still fails to run the Marvell chip to somehow downgrade firmware marvell

[ZioGTS]

Did you interrupt the controller flash process when you first tried to upgrade? After flashing ZioMod bios, the new Marvell firmware update process starts. If you did not let it finish, you probably screwed up your motherboard...

[edy4414]

Do not let it end, so strange that you remove all batteries and reset bios and turn on the PC, then install the firmware marvell asked and everything right and then turn off again and it did not work

[sinders]

[DarkFox]

Excellent!
We look forward to ZioMod 1601_S07 Bios

[ZioGTS]

Thanks Sinders! I'm going to add it to ZioMod and test it before releasing. I'm just wondering if the 12 series RST driver is stable though, as it's just a beta (well, a production candidate according to the changelog)... :|

[ZioGTS]

UPDATED 21/02/13: Released ZioMod 1601_S07 with new Intel OROM v12.0.0.1783! Check first post for download links!

[SkOrPn]

UPDATED 21/02/13: Released ZioMod 1601_S07 with new Intel OROM v12.0.0.1783! Check first post for download links!

New orom is running great here. Thanks Zio

Sent from my Nexus S using Tapatalk 2

[ZioGTS]

Running smoothly here too, but all benchmarks are pointing out slightly worse performance if compared with previous bios/driver combo. I tested 1601_S07 with Intel RST v12 beta, of course. Read performance is pretty much the same, but write has suffered from a noticeable drop in AS SSD, Anvil and ATTO... :|