[Request] hp compaq presario cq57 339wm unlock settings for overclock

[donkey]

link to bios setup utility pics https://www.dropbox.com/sc/n0i1avndc697qhl/YU7qxnQeut
link to bios http://ftp.hp.com/pub/softpaq/sp60501-61000/sp60723.exe
link to ftpw64 dump https://dl.dropboxusercontent.com/s/cxu5...BLHnCzcEnA
link to ftpw64 -me dump https://www.dropbox.com/s/84pdcwezhvia6bl/me.zip
link to ftpw64 -bios dump https://www.dropbox.com/s/abznwhdcjdte8hh/bios.zip
64bit windows 7 home premium sp1
MANUFACTURER: HEWLETT PACKARD
MODEL: 3672
VERSION: 23.4A
intel celeron b800 duo 1.5ghz(highest currently...higher would be awesome)
2gb ram
thank you and bless you if you can do it.
rsa signed.
intel 6 series hm65 express chipset
intel hd graphics 650mhz(lowest i think it goes to 1ghz but higher would be awesome)
vbios is 2089.0
it has intel speedstep
i got proper cooling.

[donovan6000]

Unfortunately since your bios are RSA signed, then they are currently unmoddable. We've yet to locate the verification check(s), so until then your out of luck. Sorry.

[donkey]

Unfortunately since your bios are RSA signed, then they are currently unmoddable. We've yet to locate the verification check(s), so until then your out of luck. Sorry.

....why cant i edit platform.ini to backup a .bin form of the bios? i try to edit backup flag from 0 to 1 and type in bios 03672.bin name but then it says not implemented cannot update file appdata\local\temp\7zO7026.tmp\platform.ini

[donovan6000]

Why are you using InsydeFlash to make a backup of your bios? The rom is already available in the bios update.

[donkey]

Why are you using InsydeFlash to make a backup of your bios? The rom is already available in the bios update.

is the hp tools partition responsible for the security checks during the flash?
there is the systemdiags folder in it that has (cryptrsa.efi) (cryptrsa32.efi) (systemdiags.efi systemdiags.s09 systemdiags.sig systemdiags32.efi systemdiags32.s09 systemdiags32.sig videomem.udm videomem32.udm) and the other folder bios update which contains cryptrsa.efi cryptrsa32.efi and hpbiosupdate.efi hpbiosupdate.txt hpbiosupdate.s09 hpbiosupdate.sig hpbiosupdate32.efi hpbiosupdate32.s09 hpbiosupdate32.sig ......in bios folder there's folders named current and previous which both have a 03672.sig and 03672.bin in them....the new folder remains emtpy though.....

[donovan6000]

If you have an HP_TOOLS partition, then InsydeFlash.exe will use those programs to flash the rom. If you delete the partition, then InsydeFlash.exe will do all the work directly. There is a signature check contained in both HP_TOOLS's programs and InsydeFlash.exe that preform initial security checks. There is also code directly in the rom that verifies itself every time your computer starts.

Why don't you just extract the bios rom from the sp60723.exe executable?

[donkey]

If you have an HP_TOOLS partition, then InsydeFlash.exe will use those programs to flash the rom. If you delete the partition, then InsydeFlash.exe will do all the work directly. There is a signature check contained in both HP_TOOLS's programs and InsydeFlash.exe that preform initial security checks. There is also code directly in the rom that verifies itself every time your computer starts.

Why don't you just extract the bios rom from the sp60723.exe executable?

so i was inside the first .fd which is 03672.fd and extracted the dxe core module found on the second file volumes it has four file volumes and i was in there with HxD and found something about extreme edition enable/disable values and something about turbo boost enable/disable...how is this even possible i have a intel celeron b800 duo core..and a lot of separated settings of the hardware....but system configuration wont or will be found on this dxe core module? or is it hidden somewhere else? there is a part at offset 348a60 that shows hp tools bios update\cyrptrsaefi hbs hbl hp bb b fr ok hp bb fail

[donovan6000]

Insyde makes very generic bios, then customizes them depending on what the manufacturer wants. The strings involving 'extreme edition' are just part that they forgot to remove. I have plenty of strings that aren't used in my bios too. I searched for 'System Configuration' because one of the tabs in my setup utility has that name. If your setup utility doesn't have a tab with this name, then you'll have to search for something else.

[donkey]

Insyde makes very generic bios, then customizes them depending on what the manufacturer wants. The strings involving 'extreme edition' are just part that they forgot to remove. I have plenty of strings that aren't used in my bios too. I searched for 'System Configuration' because one of the tabs in my setup utility has that name. If your setup utility doesn't have a tab with this name, then you'll have to search for something else.

is there a me firmware region responsible for overclocking?

[donkey]

Insyde makes very generic bios, then customizes them depending on what the manufacturer wants. The strings involving 'extreme edition' are just part that they forgot to remove. I have plenty of strings that aren't used in my bios too. I searched for 'System Configuration' because one of the tabs in my setup utility has that name. If your setup utility doesn't have a tab with this name, then you'll have to search for something else.

is there a me firmware region responsible for overclocking cuz maybe this site can help???? http://forum.techinferno.com/general-not...ptops.html

hey i tried to use fptw64 -d image but it fails or am i typing the command wrong? update:apparently i have to place some parameters on fparts.txt for fptw64 to work but i dont know what to look for.......