[REQUEST] Lenovo G580 (5ECNxxWW) Whitelist removal

[dim-zed]

-Motherboard Manufacturer and Model : Lenovo G580 (20150) (Intel Panther Point HM76)
-Bios Revision : BIOS 5ECN96WW(V9.01)
-Bios Type : Insyde Software
-Bios SLIC : not needed
-Bios Link : http://download.lenovo.com/consumer/mobi...cn96ww.exe

BIOS FPT BACKUP - http://rghost.ru/6h82PhTjD

Please delete whitelist wifi, extended BIOS is not necessary (extended BIOS is not needed)!

[BDMaster]

Here You go :

http://rghost.net/6nRrjgblD

let me know
Regards

Donate to me for my work and time . . . look into my Signature Wink

You can use Sleep Bug too :

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

[twcoll]

Thank you very much! All is working great!

[dim-zed]

All work
Thank you!

[foryn580]

Hello!

I've found some request for whitelist removal on this forum, but my laptop model is different (I believe it's 59344049), so I decided to create new thread.

Here is my spec:
Lenovo g580: i3110M(HM76), Intel HD4000, 8Gb RAM(upgraded), Win10 x64
BIOS: 5ECN42WW (v.4.01)

Wifi whitelisted card: Broadcom BCM943142HM (PCI\VEN_14E4&DEV_4365)
Wifi to install: Atheros AR5B95

Made BIOS backup using "fptw -D bios.rom -BIOS" (https://github.com/LongSoft/FTK)
https://drive.google.com/folderview?id=0B2s-xzbYDPMAZzdFV25Rcnl0Q0k&usp=sharing

I had error 104, but I edited fparts.txt file and got .rom file

  --- Flash Devices Found ---
    W25Q32BV    ID:0xEF4016    Size: 4096KB (32768Kb) (set Chip Erase Command to 0x60)
    EN25QH16    ID:0x1C7015    Size: 2048KB (16384Kb)


Also I'm interested if I should prepare USB stick (need link to guide pls) and on which flash chip I have actual BIOS and why do I need second one?

Thanks in advance!

[BDMaster]

Here You go :

http://rghost.net/6jSNSm6HG

Try to flash using Sleep Bug before then if You get Error use the USB Stick and Pure DOS . . .
Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

[foryn580]

Hello! Thanks for reply!

fptw output after waking up:

Intel ® Flash Programming Tool. Version: 8.1.51.1476
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® HM76 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
EN25QH16 ID:0x1C7015 Size: 2048KB (16384Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.

[BDMaster]

Have flashed by USB Stick DOS Mode ?
It will work sure as is tested until v.5ECN96WW only version locked is 62CN97WW !
let me know
Regards

[foryn580]

Hello!

Got same error when using USB stick, but after skip result was successful)

Thank you very much! Works like a charm!

PS Still wondering why it's needed 2 flash chips)

[BDMaster]

So I will explain . . .
The Chipset look to full Eeprom Memory Mam even are two Chips !
It's only an Architectural convenience !

1. Chip 1 has Descriptors - Me - Pdr - GbE Regions
2. Chip 2 has Bios Region
That's it !
Regards