Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
Thinkpad e460 whitelist removal
Last Post: JohnBen
Yesterday 10:18 PM
» Replies: 0
» Views: 38
[REQUEST] Lenovo G580 (5ECNxxWW) Whiteli...
Last Post: Alex'sShtormXXX
Yesterday 01:40 PM
» Replies: 1738
» Views: 1250777
[REQUEST] Lenovo Ideapad Z710 (7FCNxxWW)...
Last Post: Dudu2002
Yesterday 01:28 PM
» Replies: 232
» Views: 216946
an adding of the ASUS CT-479 support for...
Last Post: DeathBringer
Yesterday 09:38 AM
» Replies: 1
» Views: 74
[Unlocked AHCI, sp53872] HP Pavilion g6-...
Last Post: bryan26i
Yesterday 01:13 AM
» Replies: 14
» Views: 22295
[REQUEST] Lenovo IdeaPad Gaming 3 15IMH0...
Last Post: leoramoners
11-12-2026 07:09 AM
» Replies: 67
» Views: 61882
[REQUEST]
Last Post: Skimpa
11-10-2026 04:20 PM
» Replies: 0
» Views: 291
[REQUEST] Sony VAIO SVE151 & SVE171 Seri...
Last Post: ryan13213545345
11-09-2026 05:36 PM
» Replies: 61
» Views: 53887
Lenovo M90p Xeon Support + Question
Last Post: bmb021
11-08-2026 12:23 PM
» Replies: 23
» Views: 5787
[REQUEST] Acer Nitro 5 AN515-54 BIOS Unl...
Last Post: Dudu2002
11-08-2026 10:13 AM
» Replies: 150
» Views: 139369
[REQUEST] Lenovo IdeaPad S210 (80CNxxWW)...
Last Post: Dudu2002
11-08-2026 10:12 AM
» Replies: 46
» Views: 31925
[REQUEST] HP Elitebook 8440p Whitelist R...
Last Post: mooms2
11-07-2026 01:17 PM
» Replies: 76
» Views: 67675
Lenovo M90q Gen 3 LGA1700 Support
Last Post: DeathBringer
11-06-2026 01:41 AM
» Replies: 3
» Views: 645
[REQUEST] HP 250 G7 BIOS:F.38 Rev.A
Last Post: laWiskaPY
11-05-2026 01:55 PM
» Replies: 1
» Views: 2098
[REQUEST] HP Pavilion dv6-6103er (BID 03...
Last Post: Arseniyzhivotov
11-05-2026 11:40 AM
» Replies: 0
» Views: 273
[REQUEST] Lenovo Y70-70 (9ECNxxWW) White...
Last Post: srsly21
11-04-2026 09:10 AM
» Replies: 93
» Views: 64327
[REQUEST] Lenovo B50-70 (9DCNxxWW) BIOS ...
Last Post: kmz7
11-03-2026 06:24 PM
» Replies: 79
» Views: 67380
[SOLVED !] Clevo N870EJ1 / Bricked / Bad...
Last Post: Clevo_struggler
11-02-2026 03:15 PM
» Replies: 10
» Views: 15092
Alienware 17 R1 "ranger" - BIOS help
Last Post: randomebios
11-01-2026 01:01 PM
» Replies: 6
» Views: 4759
[REQUEST] Gigabyte Aero 15 OLED KC BIOS ...
Last Post: blender8247
10-31-2026 08:38 AM
» Replies: 14
» Views: 8906

Everex XT5000T mod & _PSS Package Calculator/Generator for AMD K8 Processors
#1
FIC / Everex XT5000T

Bios Version: 1.1D
Bios Date: 09/23/2008
BIOS Direct Download (flashabl.rom in the iso file): http://pcambrosia.com/XT5000T/Files/Bios/BIOS11D.zip

Motherboard: FIC XTB70 (used by Fujitsu-Siemens Amilo Xa1526, Amilo 1527, Amilo 2528, Amilo 2529, and FIC Everex Xt5000T/Xt5300T notebooks)

Side questions:

Older bios version C.1C (6/28/2007) - Update allows BIOS to recognize 4GB memory configuration for Vista 64bit edition.
Bios 1.1D update implements low RPM(instead of stop) fan solution to ease thermal cycling concerns of Nvidia chipset.

1. I extracted and compared ACPI DSDT tables from both C.1C and 1.1D and found them identical. Could you perhaps help point out where the change was made? (Really clueless about assembly/IDA-Pro etc.)

2. Amilo Xa1527 Bios ver. 1.1S (24.10.2008)
Could it be flashed on the XT5000T? Is it unlocked, or provides more unlocking potential?
Given that Everex XT5000T & Amilo Xa1526 are almost identical (only the latter has bluetooth, and wifi card and touchpad differ, otherwise identical mobo)

Many thanks
find
quote
#2
Welcome in BIOS-MODS Smile

---- I have found some options for unlocking in the BIOS but it doesn`t include AHCI or VT as they aren`t available and i guess the chipset doesn`t support these features ........... The unlocked BIOS will be ready today .
Also i couldn`t extract the BIOS file from ver 1D ( from iso file ) but i have extracted the 1C ver and found some hidden options ( normally all BIOS version are the same in menus and options and changes only made to other settings like power management and display , so it will be the same options for the 1D ) ......... upload the .rom file of the 1D ver if you need to modify it .
By the way, don`t expect too much from most of BIOSes which supports AMD chipset as most of it has few hidden options unlike INTEL .

1) ACPI tables in general or specially the DSDT tables are for windows only to let it control some hardware including fans but alot of notebooks and specially ones with AMD chipset , its DSDT didn`t include commands for controlling fans ........ it`s only reporting information about thermal zones but not controlling fans ( sothat you found no changes in DSDT as they don`t need to modify it for controlling fans ) ............ the EMBEDDED CONTROLLER is the only device controlling fans and its using 80X51 assembly unlike the main BIOS which uses 80X86 ...... i don`t prefer modifying it as its hard and hasn`t got any recovery procedure .

2) I think no , any different hardware results in different BIOS modules and structure . Also , the BIOS will be broken if you flashed the wrong BIOS .
There are no new options in the BIOS except some options for the new hardware like CIR controller ......................... its not worth anything to risk and flash this BIOS as there are no new options will be available .


"Many of life's failures are people who did not realize how close they were to success when they gave up." Smile
find
quote
#3
Many thanks for your reply Hossam.

1.1D Bios ROM file: http://www.mediafire.com/?4c4zrj94g94hhyt
1.1D is the latest original, so the only one I need to have unlocked. If there's not much worth unlocking, then I'd advise you spare your valuable time & effort Smile

On a side note, the best I can find so far in terms of simulating direct fan control:

1. Download latest RWEverything (currently v1.5.2)

2. Click Access -> Embedded Controller (or the EC icon in the toolbar)

3. Enter 006E and 006A for the EC_SC and EC_DATA values

4. Change bit E9 (E0 + 09 in the table) from 01 to FF to increase fan speed, or FF to 01 for low fan speed..

Changing bit E9 to 00 (whether from 01 or FF) seems to consistently result in quick system powerdown, even if temps are low. In some prior testing, I somehow managed to boot system with fan off, but couldn't duplicate this again...

STILL, the high speed as controllable by OS or direct EC access is not the full speed at which the fan blows when the laptop is first powered on (right before the BIOS loads). I understand I could just hack the sensor (3rd) wire of the fan, perhaps hook to an on/off switch accessible from outside the box to get full speed by disconnecting the sensor wire, whenever needed?

P.S. After a second look at the DST table, I guess I can at least change the thermal trip points for the fan control.
Code:
Name(HILM,Package(0x04){ 0x41, 0x49, 0x55, 0x69 }) Name(LOLM,Package(0x04){ 0x00, 0x37, 0x44, 0x4E })
find
quote
#4
Hmm , you seems experienced sothat i can talk about advanced things and you will understand quickly Smile

1) You are modifying the EC ram region not the firmware itslef ....... the commands you are making may not apply .
the EC FRIMWARE is usually the first 128KB of the BIOS file ( or a file called EC.BIN attached with bios files ) and it has a code name or a project name , you need to find the project name for your EC and download its data sheet then read it carefully and finally think about modifying the EC FW .
the EC FW extracts the values in the RAM and it has a region in the RAM called EC REGION and there you will find the values which you have found .................... so far , these values are not controlling anything or in other words its just like flags ....... EC reads this flags and work depending on it ...... these flags are changed every few seconds .
you may have control on fan in windows by using this method but its not permanent and every time you boot into windows you should do this ........ remember that these are just values in the ram not the main commands controlling the fan .

on a side not :-
you should knew that i have done like you exactly but with the ALIENWARE M18X-R1 as i was trying to increase fan speeds Big Grin ...... i used RW tool like you , i modified DSDT table like you are trying to do now ....... and finally i wrongly modified the EC FW in the BIOS file and results in broken motherboard as there is no recovery for the EC FW ! just because the values in the DATA SHEETS is for the EC RAM as well not the main program !!! no one will give you the source code as no one have it and you will have to trace these flags to the main program in the 80x51 disassembler then modify it .


2) as you said that the DSDT isn`t changed from 1C to 1D and fans speeds are changed , then any modified values in the DSDT will lead you to no result ( i guess this Smile ) .

as i promised , BIOS will be ready today Smile


"Many of life's failures are people who did not realize how close they were to success when they gave up." Smile
find
quote
#5
(02-24-2012, 02:09 PM)AHMED HOSSAM Wrote: Hmm , you seems experienced sothat i can talk about advanced things and you will understand quickly Smile

1) You are modifying the EC ram region not the firmware itslef ....... the commands you are making may not apply .
the EC FRIMWARE is usually the first 128KB of the BIOS file ( or a file called EC.BIN attached with bios files ) and it has a code name or a project name , you need to find the project name for your EC and download its data sheet then read it carefully and finally think about modifying the EC FW .
the EC FW extracts the values in the RAM and it has a region in the RAM called EC REGION and there you will find the values which you have found .................... so far , these values are not controlling anything or in other words its just like flags ....... EC reads this flags and work depending on it ...... these flags are changed every few seconds .
you may have control on fan in windows by using this method but its not permanent and every time you boot into windows you should do this ........ remember that these are just values in the ram not the main commands controlling the fan .

Of course, I understand all that. The whole point was that everex went out of business, and this laptop was only supported up to Win Vista. Getting some stuff working in Windows 7 x64 is a pain. old hotkey driver doesn't work, so I programmed a tool in AHK_L to interface with WMI to control LCD brightness with Function keys (Fn+F8/F9), turn off display (Win+F8), toggle touchpad on/off (Fn+F5), and some media keys, one of which is the Fan button. I dont recall fan button working even in XP (with latest 1.1D bios) , so I needed to put it to use, at least for toggling fan speed, which is what i managed to discover Smile
Having said that, I made sure that the E9 register does not change, and is only ever affected by manual intervention, and never changes back on its own, unless I reboot, of course.

Similar was done on the Acer TimelineX (and also happens to be how thinkpad fancontrol 3rd party apps work -- all through interfacing with the EC in OS):
http://forum.notebookreview.com/acer/562...ost7260497

(02-24-2012, 02:09 PM)AHMED HOSSAM Wrote: on a side not :-
you should knew that i have done like you exactly but with the ALIENWARE M18X-R1 as i was trying to increase fan speeds Big Grin ...... i used RW tool like you , i modified DSDT table like you are trying to do now ....... and finally i wrongly modified the EC FW in the BIOS file and results in broken motherboard as there is no recovery for the EC FW ! just because the values in the DATA SHEETS is for the EC RAM as well not the main program !!! no one will give you the source code as no one have it and you will have to trace these flags to the main program in the 80x51 disassembler then modify it .

Perfectly understandable. I wasn't intending to actually modify the EC FW, just was curious to know the differences, perhaps to lead to better understanding of how to better interface with it in OS (whether windows or Linux). Unfortunately, the EC on this board is a Mitsubishi PMU08a, and documentation is very scarce. I did manage to find its datasheet, but ended up quickly deleting it, as it was of zero to no use for me (maybe only useful to manufacturers).

(02-24-2012, 02:09 PM)AHMED HOSSAM Wrote: 2) as you said that the DSDT isn`t changed from 1C to 1D and fans speeds are changed , then any modified values in the DSDT will lead you to no result ( i guess this Smile ) .

understood, of course.. I was only speaking of changing the trip points of the temp. so for example, knowing fan turns high on 65, I can make it kick in earlier, like at 60 (given load rarely gets it up over 65 -- especially when using RMClock)

Another thought was obviating the need for RMClock to undervolt (epsecially due to occasional trouble with RMClock in Win7 x64, even with updated RTCore.dll from 8/31/2011 -- from evga precision 2.0.4) by doing this:
http://www.stderr.nl/Blog/Hardware/S270/...lting.html
& like this: http://www.insanelymac.com/forum/index.p...try1296407

Though from looking in RWeverything, mine was in SSDT table + lowest VID achievable by this method is 0.8000v and I normally underclock lowest multiplier (0x = 800mhz) to 0.7000 with RMClock..
It was so much easier in Linux, that I contributed a patch to phc-linux tool, back in the days http://linux-phc.org/forum/viewtopic.php?f=10&t=111 Smile


(02-24-2012, 02:09 PM)AHMED HOSSAM Wrote: as i promised , BIOS will be ready today Smile

Thanks again for your efforts Smile
find
quote
#6
This is perfect work from you Smile keep on this great work Smile

Here is the unlocked BIOS , i have unlocked ADVANCED tab , moved some options inside it and i have also replaced the options inside the INFO tab with other important options :-

http://www.mediafire.com/?920aabr8u5c4850

My advice to you : to control fans , you should code a driver that send commands to ports 60/64 that send commands from 40h~4Fh which control the fan speeds , stop it , increase or decrease ........ even for multiple fans .
you have to write a driver which will perform the I/O operations through READ_PORT_UCHAR .
note that this may cause conflict with the other ACPI sub-systems .


"Many of life's failures are people who did not realize how close they were to success when they gave up." Smile
find
quote
#7
(02-24-2012, 05:10 PM)AHMED HOSSAM Wrote: This is perfect work from you Smile keep on this great work Smile

Here is the unlocked BIOS , i have unlocked ADVANCED tab , moved some options inside it and i have also replaced the options inside the INFO tab with other important options :-

http://www.mediafire.com/?920aabr8u5c4850

Awesome! will give it a shot tomorrow and report back Smile

(02-24-2012, 05:10 PM)AHMED HOSSAM Wrote: My advice to you : to control fans , you should code a driver that send commands to ports 60/64 that send commands from 40h~4Fh which control the fan speeds , stop it , increase or decrease ........ even for multiple fans .
you have to write a driver which will perform the I/O operations through READ_PORT_UCHAR .
note that this may cause conflict with the other ACPI sub-systems .

trying 60/64 as EC_DATA and EC_SC in rweverything froze my touchpad, and soon after, my video card driver
even default values (66/62) in rweverything was very awkward, often froze rweverything followed by BSOD's.
The only I/O ports that worked normally (and instantaneously) were 6E/6A, as I found from a google search 2 days prior, for this model of EC Chip (Google: Embedded Controller PMU08A)
I guess I could use something like WinIO or Winring0 for driver development purposes. And on linux, perhaps adapt simple kernel module like this: http://www.chihoang.de/code-schnipsel/am...-3530.html

thanks Smile
find
quote
#8
Port 60/64 and commands from 40h~4Fh are only example and common for most of EC but may be your EC use different ports and commands ( this should be found in the EC datasheet which you have deleted Smile ) but if it uses the same commands but no response from the EC when you use it , then the only way is to modify the EC FW ( or may be you can add some statements in the DSDT to control fan speeds .
The plug&play ID for the fans is PNP0C0B .
Just like this example :-

Code:
Scope(\_SB) { Processor( CPU0, 1, // unique number for this processor 0x110, // system IO address of Pblk Registers 0x06 // length in bytes of PBlk ) {} Scope(\_SB.PCI0.ISA0) { Device(EC0) { Name(_HID, EISAID("PNP0C09")) // ID for this EC // current resource description for this EC Name(_CRS, ResourceTemplate() { IO(Decode16,0x62,0x62,0,1) IO(Decode16,0x66,0x66,0,1) }) Name(_GPE, 0) // GPE index for this EC // create EC's region and field for thermal support OperationRegion(EC0, EmbeddedControl, 0, 0xFF) Field(EC0, ByteAcc, Lock, Preserve) { MODE, 1, // thermal policy (quiet/perform) FAN, 1, // fan power (on/off) , 6, // reserved TMP, 8, // current temp AC0, 8, // active cooling temp (fan high) , 8, // reserved PSV, 8, // passive cooling temp CS4 8, // critical S4 temp CRT, 8 // critical temp } // following is a method that OSPM will schedule after // it receives an SCI and queries the EC to receive value 7 Method(_Q07) { Notify (\_SB.PCI0.ISA0.EC0.TZ0, 0x80) } // end of Notify method // fan cooling on/off - engaged at AC0 temp PowerResource(PFAN, 0, 0) { Method(_STA) { Return (\_SB.PCI0.ISA0.EC0.FAN) } // check power state Method(_STA) { Return (\_SB.PCI0.ISA0.EC0.FAN) } // check power state Method(_ON) { Store (One, \_SB.PCI0.ISA0.EC0.FAN) } // turn on fan Method(_OFF) { Store ( Zero, \_SB.PCI0.ISA0.EC0.FAN) } // turn off fan } // Create FAN device object Device (FAN) { // Device ID for the FAN Name(_HID, EISAID("PNP0C0B")) // list power resource for the fan Name(_PR0, Package(){PFAN}) } // create a thermal zone ThermalZone (TZ0) { Method(_TMP) { Return (\_SB.PCI0.ISA0.EC0.TMP )} // get current temp Method(_AC0) { Return (\_SB.PCI0.ISA0.EC0.AC0) } // fan high temp Name(_AL0, Package(){\_SB.PCI0.ISA0.EC0.FAN}) // fan is act cool dev Method(_PSV) { Return (\_SB.PCI0.ISA0.EC0.PSV) } // passive cooling temp Name(_PSL, Package (){\_SB.CPU0}) // passive cooling devices Method(_CS4) { Return (\_SB.PCI0.ISA0.EC0.CS4) } // get critical S4 temp Method(_CRT) { Return (\_SB.PCI0.ISA0.EC0.CRT) } // get critical temp Method(_SCP, 1) { Store (Arg1, \_SB.PCI0.ISA0.EC0.MODE) } // set cooling mode Name(_TC1, 4) // bogus example constant Name(_TC2, 3) // bogus example constant Name(_TSP, 150) // passive sampling = 15 sec Name(_TZP, 0) // polling not required } // end of TZ0 } // end of ECO } // end of \_SB.PCI0.ISA0 scope- } // end of \_SB scope

And for multiple fan speeds , use code like this :-

Code:
Scope(\_SB) { Processor( CPU0, 1, // unique number for this processor 0x110, // system IO address of Pblk Registers 0x06 // length in bytes of PBlk ) {} Scope(\_SB.PCI0.ISA0) { Device(EC0) { Name(_HID, EISAID("PNP0C09")) // ID for this EC // current resource description for this EC Name(_CRS, ResourceTemplate() { IO(Decode16,0x62,0x62,0,1) IO(Decode16,0x66,0x66,0,1) }) Name(_GPE, 0) // GPE index for this EC // create EC's region and field for thermal support OperationRegion(EC0, EmbeddedControl, 0, 0xFF) Field(EC0, ByteAcc, Lock, Preserve) { MODE, 1, // thermal policy (quiet/perform) FAN0, 1, // fan strength high/off FAN1, 1, // fan strength low/off , 5, // reserved TMP, 8, // current temp AC0, 8, // active cooling temp (high) AC1, 8, // active cooling temp (low) PSV, 8, // passive cooling temp CS4 8, // critical S4 temp CRT, 8 // critical temp } // following is a method that OSPM will schedule after it // receives an SCI and queries the EC to receive value 7 Method(_Q07) { Notify (\_SB.PCI0.ISA0.EC0.TZ0, 0x80) } end of Notify method // fan cooling mode high/off - engaged at AC0 temp PowerResource(FN10, 0, 0) { Method(_STA) { Return (\_SB.PCI0.ISA0.EC0.FAN0) } // check power state Method(_ON) { Store (One, \_SB.PCI0.ISA0.EC0.FAN0) } // turn on fan at high Method(_OFF) { Store (Zero, \_SB.PCI0.ISA0.EC0.FAN0) }// turn off fan } // fan cooling mode low/off - engaged at AC1 temp PowerResource(FN11, 0, 0) { Method(_STA) { Return (\_SB.PCI0.ISA0.EC0.FAN1) } // check power state Method(_ON) { Store (One, \_SB.PCI0.ISA0.EC0.FAN1) } // turn on fan at low Method(_OFF) { Store (Zero, \_SB.PCI0.ISA0.EC0.FAN1) }// turn off fan // Following is a single fan with two speeds. This is represented // by creating two logical fan devices. When FN2 is turned on then // the fan is at a low speed. When FN1 and FN2 are both on then // the fan is at high speed. // // Create FAN device object FN1 Device (FN1) { // Device ID for the FAN Name(_HID, EISAID("PNP0C0B")) Name(_PR0, Package(){FN10, FN11}) } // Create FAN device object FN2 Device (FN2) { // Device ID for the FAN Name(_HID, EISAID("PNP0C0B")) Name(_PR0, Package(){FN10}) } // create a thermal zone ThermalZone (TZ0) { Method(_TMP) { Return (\_SB.PCI0.ISA0.EC0.TMP )} // get current temp Method(_AC0) { Return (\_SB.PCI0.ISA0.EC0.AC0) } // fan high temp Method(_AC1) { Return (\_SB.PCI0.ISA0.EC0.AC1) } // fan low temp Name(_AL0, Package() {\_SB.PCI0.ISA0.EC0.FN1}) // active cooling (high) Name(_AL1, Package() {\_SB.PCI0.ISA0.EC0.FN2}) // active cooling (low) Method(_PSV) { Return (\_SB.PCI0.ISA0.EC0.PSV) } // passive cooling temp Name(_PSL, Package() {\_SB.CPU0}) // passive cooling devices Method(_CS4) { Return (\_SB.PCI0.ISA0.EC0.CS4) } // get critical S4 temp Method(_CRT) { Return (\_SB.PCI0.ISA0.EC0.CRT) } // get crit. temp Method(_SCP, 1) { Store (Arg1, \_SB.PCI0.ISA0.EC0.MODE) } // set cooling mode Name(_TC1, 4) // bogus example constant Name(_TC2, 3) // bogus example constant Name(_TSP, 150) // passive sampling = 15 sec Name(_TZP, 0) // polling not required } // end of TZ0 } // end of ECO } // end of \_SB.PCI0.ISA0 scope } // end of \_SB scope

These are just examples , use you own EC ID But the FAN ID is the same in the example ........... also tweak the code as you like .
you can download the ACPI datasheet and look for this , its fully explained there with more examples .
I was thinking to make one for my ACER 5536G with AMD chipset and CPU but don`t have time ......... i just read most of the datasheet and knew how to do it but don`t have time as i can`t finish modifying BIOSes in the forum to begin doing this Smile
I hope the unlocked BIOS works well Smile


"Many of life's failures are people who did not realize how close they were to success when they gave up." Smile
find
quote
#9
Unlocked BIOS flashed and working like a charm. Thanks Ahmed Smile

Some emulated screens from Phoenix Bios Editor Pro, highlighting your changes:

1. USB Bios Legacy Support moved to main page
[Image: 1main.jpg]

2. Static Info page replaced with several options.. Most interesting is the CPU Throttle option which is disabled by default. Couldn't tell a difference yet after enabling it.
[Image: 2info.jpg]

3. Advanced page.. Some possibly useful options
[Image: 3advanced1main.jpg]

4. iGPU - Chipset settings page. Enabling it doesn't seem to make any difference. Windows doesn't detect any new hardware, and CPU-Z only lists the standalone Geforce Go 7600 in the GPU tab, with the drop down list dimmed. Ponders whether Dynamic Crush Voltage would be of any use then. From quick preliminary testing, enabling it doesn't seem to cause any change in terms of idle GPU temp (GPU shares heatsink with NB chipset).
[Image: 3advanced2igpuchipset.jpg]

Some real screenshots of the iGPU - Chipset page:
[Image: 25022012106.jpg]

[Image: 25022012107.jpg]
find
quote
#10
you are welcome ,Thanks for confirming Smile i will move the thread to unlocked section .


the CPU throttle will only occur in high temps not in the normal case ......... sothat it will not change anything if you don`t suffer from overheating CPU as the CPU will only throttle at predefined temp.

dynamic crash voltage is a good technique for making the CPU and the GPU always safe ( just search in google , you will find alot of explain for this ) .
I don`t knew if your notebook includes an integrated graphics card or not , but if you don`t have one , then this option will not change anything and may cause your notebook not to boot properly if adjusted ( in this case you need to just reset CMOS battery ) .

I hope you fix your issue using the DSDT method ( incase you found that your EC use the same 60/64 ports and it didn`t work ) Smile




"Many of life's failures are people who did not realize how close they were to success when they gave up." Smile
find
quote


Forum Jump:


Users browsing this thread: 2 Guest(s)