[REQUEST] HP MINI LAPTOP 110-3030NR

[webatomico]

Ok i made this double post because i don't know where to put it, i need to remove the whitelist and also i need the slic mod i think, because i can't install Win Xp (the laptop came with Win7).

- HP MINI LAPTOP 110-3030NR
- http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48987.exe

- The laptop is not runnin any windows so i need to install the moded bios from DOS

- The laptop is running the bios f.06 (posted link) but, if you can of course, i post the link to the f.15 version wich is the latest an if theres a possibility mod it.
http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51731.exe

Thanks and sorry for my horrible english...

[camiloml]

http://www.bios-mods.com/BIOS/Whitelists...miloml.exe

Sorry, there's no DOS flasher. Flash it using a WinXP Live CD.

[webatomico]

Ok thanks for the reply... But this bios is only whitelist removed?

[camiloml]

Yes, to install xp i think you must prepare a windows installation cd with integrated ahci drivers, or go to bios and disable ahci mode for the sata ports. It will let you install xp then.

[webatomico]

Yes, to install xp i think you must prepare a windows installation cd with integrated ahci drivers, or go to bios and disable ahci mode for the sata ports. It will let you install xp then.

I crated the cd with the ahci drivers and it did'nt work, when i try to install xp i can't see the hard drive, and i think the bios has some features locked cause i can't change the sata mode, what can i do?

[camiloml]

ahci drivers need to match your SATA controller PCI ID to work.

Boot the machine with a ubuntu live cd/usb open a terminal and run this

sudo lspci -vvxxnnn

then look if the controller is in ahci mode and whici PCI ID has in that mode, then modify the ini of the ahci driver to match the PCI ID if not present.

Better paste here the result of the lspci command and we will discuss it.

[webatomico]

ahci drivers need to match your SATA controller PCI ID to work.

Boot the machine with a ubuntu live cd/usb open a terminal and run this

sudo lspci -vvxxnnn

then look if the controller is in ahci mode and whici PCI ID has in that mode, then modify the ini of the ahci driver to match the PCI ID if not present.

Better paste here the result of the lspci command and we will discuss it.

Ok i'll do that, i'm installing Win7 again to see what i can do, can you modify the bios to unlock hidden settings then flash it via Win7 or DOS, so i can change the ahci parameters inside the bios settings?? Doing that i can install WinXP without problems