But no boot, no screen... Lights on and 10 seconds later, laptop turns off itself..
I'm going crazy :/ I gave him 560m and a lot of money to buy i7 620M (Only %5 performance increase...)
NOTE: 3 of the pins were slightly bent but i corrected them a little bit and with a little push, i can install it to Cpu slot without (?) problem..
I think the problem is BIOS again... Can we do something about it? This cpu is stepping C2.
03-08-2017, 12:19 PM (This post was last modified: 03-08-2017, 01:15 PM by DeathBringer.)
(03-08-2017, 11:12 AM)baris.seven Wrote: Lights on and 10 seconds later, laptop turns off itself..
Good sign!
Try this algorithm:
1) remove AC jack, Main Battery, and CMOS Battery
2) remove HDD and all DIMMs
3) install new CPU
4) wait 10 mins
5) press and hold power button for 30 sec.
6) install CMOS Battery and one DIMM only, inject AC jack (without Main Battery!)
7) try to boot your laptop.
(03-08-2017, 11:12 AM)baris.seven Wrote: I think the problem is BIOS again...
I don't think so. In this case BIOS even wasn't loaded by the motherboard.
Posts: 22
Threads: 2
Joined: Mar 2017
Reputation:
0
Oh if it's good sign I'm trying right away now.
Why bios is not loaded with 620m but loaded with 350
Anyway.. Get to the process now.
But I'm not sure i located the bios battery?
There is a black button on motherboard and there is writing "100" on it.
Posts: 22
Threads: 2
Joined: Mar 2017
Reputation:
0
Oh Ship it's difficult i have to tear down all of it
It's the button that has blue ring right?
I hope i can access it.. And hope that it's not soldered cmos battery (lenovo forums someone says that it's half (?) soldered)
Hey it's button okay i meant something but my mother language is not English it's like a button :p
I can't open the full chassis. And i don't have to.. I touched the battery with a screwdriver and it's soldered to motherboard... I can't do it. I can solder it but I'm afraid of it. Opening the chassis will be really hard it seems.. Cut off the bios battery and then solder is a risk too..
What the f## is this i hate it. Why me
350m and 740qm was just fine.. Didn't need all of this..............