Hello,
I hope you can help me.
I bricked my w870cu laptop (with the M460 graphics card) by downgrading the bios. At the beginning, I had the BIOS V 1.00.18 & EC V 1.00.14 and I had some troubles with windows booting, so I decided to start playing with the bios...very, very, very bad idea....so I decided to install BIOS V 1.00.10 & EC V. 1.00.10
At the first boot, I was able to see that the graphics card were not recognised but the display still worked, after some more boots I am in the following situation:
- Screen always and completely black.
- USB and CD looks like works, at least I can see a red led from my usb pen drive and the CD is making some start-up noise.
- Fans starts.
- After some second there are two short beeps and at the same time the red led from my pen drive flashes.
- After a while the fans goes to full speed and at the same time the three led start flashing and beeping for a while.
- After that the laptop shuts down.
I tried to reset the CMOS by removing the CMOS battery but I was not able to dismount the mother board...
I also tried to create a Crisis Disk following the link above:
https://www.bios-mods.com/bios-recov...bios-recovery/ without success.
So please, I need help!!!!
I need to know what should be the name of the bios file for the Crisis Disk.
I need to know what should be the key combination to use the Crisis Disk, I tried FN+B, FN+R, WIN+B, WIN+R
What should I do, please help!!!