ASRock Z170 Extreme 7+ SLIC Request

[Kelxin]

SLIC: https://www.sendspace.com/file/9eg5jz

ROM 1.70: http://66.226.78.22/downloadsite/BIOS/11...70)ROM.zip

Extracted file name: Z17EX7P1.70

Other BIOS downloads: http://www.asrock.com/mb/Intel/Z170%20Ex...t=Download&os=BIOS

Motherboard Info: http://www.asrock.com/mb/intel/Z170%20Extreme7%2B/

SLIC Requested:  Either 2.1 or 2.3 from Asus or Dell

Tried with Phoenixtool 2.59 but no matter what I do, I either get an Error 9 - Index was outside the bounds of the array or unable to add SLIC code.

Any help would be appreciated.

Thank you!   - Kelxin

Update: 

I found the Phoenix Tool 2.64 which allowed me to SLIC it, but am unable to test the modified bios due to a secure check on the file.   I looked at the file itself and it doesn't look like its encapsulated and looks a lot like the X99 Extreme 11 Bios that someone hand edited for me before.  Anyone have any advice on how to pass the secure check when the file isn't encapsulated?

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/7GBZt7FVt

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

P.S. Upload your Bios Mod Slic here !

[Kelxin]

Straight backup of bios:  https://www.sendspace.com/file/lbbaiy

Results.rar : https://www.sendspace.com/file/i4jz9n

Desired SLIC Bin file to be integrated:  https://www.sendspace.com/file/srdv8h

I did find a program that is letting me write to the bios, but every time that I have flashed an image, after I reboot it won't fully POST with an error of 4F.

AMI Firmware update tool for AptioV allowed me to read / write the bios directly and has some interesting options that I haven't had a chance to play with.  

Newest AMI tool download link:  http://www.ami.com/download-license-agre...tility.zip
When using the Phoenixtool 2.64 "module" and "code" both errored out, but dynamic would say it was successful after warning that it didn't initially find a SLIC table.  Once it modified the bios, I flashed it with the AMI AptioV afuwin tool but wouldn't POST after.

Don't have time to get AIDA right now, so will post that report tomorrow if I haven't heard back.

[BDMaster]

Ask to Sovem about this Bios as there is no FPT support and It is a SecureFlash Bios !
I think that only way to introduce a Slic is to use Structure to add Modules and then
Hex patch to modify ALASKA !
But It's not rewritable . . .
Regards

[Kelxin]

Thank you BDMaster.

I sent Sovem a PM with a link to this thread and uploaded my AIDA64 report (it actually forced me onto the newest beta to even evaluate my system because it was too new).

AIDA64 Report: https://www.sendspace.com/file/75qwzd

[Kelxin]

Thank you BDMaster.

I sent Sovem a PM with a link to this thread and uploaded my AIDA64 report (it actually forced me onto the newest beta to even evaluate my system because it was too new).

AIDA64 Report: https://www.sendspace.com/file/75qwzd

Serg from My Digital Life's forums ended up being able to take care of it.
Link for those interested:  http://forums.mydigitallife.info/threads...?p=1149179&posted=1#post1149179
Thanks for looking into it again BDMaster.

- Kelxin

[BDMaster]

Reupload It please to see how to Flash It ?
I think using AFUWin /G but I didn't tried It !
Then I's only Slic 2.1 not Dell 2.2 or 2.3 , so It's 1st step this one !
Regards

[Kelxin]

Reupload It please to see how to Flash It ?
I think using AFUWin /G but I didn't tried It !
Then I's only Slic 2.1 not Dell 2.2 or 2.3 , so It's 1st step this one !
Regards

To flash just use the dos afuwinx64 bios.rom.  Serg had the /G on the command line but the new afuwinx64 didn't like it and I removed the /g and it worked perfect.

Link to bios created by Serg:  https://www.sendspace.com/file/vbb75w
Keep in mind, he said this was created specifically for my board using a backup of the bios.  I am unsure if this will work on anyone else board at all without bricking.

Edit: Re-uploaded and fixed link.

Update:

I extracted the SLIC files from the bios that Serg made, and re-integrated those by hand into the factory bios instead of a backup of my bios.  Flashed my bios back to a non-slic bios to ensure everything was clean, then re-flashed the bios that I created and have Asus SLIC 2.1 working perfect.

Bios I created:  https://www.sendspace.com/file/air553

Next I will be figuring out how to create those SLIC bin files (69009842-63f2-43db-964b-efad1c39ec85 and 996aa1e0-1e8c-4f36-b519-a170a206fc14) so that I can create them from scratch on my own and integrate SLIC 2.3 into this bios.

Update 2:

Success! Dell SLIC 2.3 on the stock 1.7 ROM : https://www.sendspace.com/file/h88a04

[BDMaster]

Hi friend,
what else to say . . . only Perfect !!!
Nice Tutorial and Guide for all users !
many thanks and regards

[joltheadq]

can anybody post this slic again?  All the uploads are unavailable.