ASUS Rampage III Formula Request

[SPdok]

Enormous thank you. Long time already for us nebilo updates the developers forgot about us and the new Windows 8.1 can not install the driver for your network card was hope nA latest version but without success installer writes found device.Intel Network Connections Software v18.8

[doctoren]

@Will2300

Hi, just wanting to say thanks for the updated bios. Happy New Year.

[faust542]

Hi,

I just flashed my bios to this modded one. It works perfect. I want to ask, if you can make a mod, where the silent-fan-profile is changed.

Right now minimum fanspeed is 60%. Can you change it to 20% at 30 degrees? That would be much helpfull for the silence.

[tony1024]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

Hi does this mod support TRIM under RAID 0 for the Intel ICH10R?

[Morph]

Hi guys,
I've just flashed the updated BIOS to my newly acquired R3F and it works great! I do have one question though - hopefully this is the right palace to ask - I am running a Xeon W3670 which the board reports correctly at boot, however windows (CPUID and Intel processor identity tool) show it as an Intel Xeon W 000. Is this a microcode issue? as I was previously using the same CPU in a Asus P6T with no issues. If it is can it be updated / fixed?

Thanks

[marcustaz]

Thanks to the experts for updating the Roms for this motherboard. I am still using this board and I was wondering if the experts can update it again with the latest firmware's etc?

THanks

[srialmaster]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

Can you update this BIOS with the newer Marvell 91xx SATA 6G Controller BIOS/Firmware:
http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=startdown&id=1572&lang=en

-Nate

[marcustaz]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

Can you update this BIOS with the newer Marvell 91xx SATA 6G Controller BIOS/Firmware:
http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=startdown&id=1572&lang=en

-Nate

Thanks Nate, I'll check it out!  Has there been any updates to intel firmware etc since the last bios mod?

[srialmaster]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

Can you update this BIOS with the newer Marvell 91xx SATA 6G Controller BIOS/Firmware:
http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=startdown&id=1572&lang=en

-Nate

Thanks Nate, I'll check it out!  Has there been any updates to intel firmware etc since the last bios mod?

This Marvell update is the only one I can find thus far. I scoured that website looking for more for Intel and didn't see any.
I will continue and see what I can come up with.

-Nate

[marcustaz]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

Can you update this BIOS with the newer Marvell 91xx SATA 6G Controller BIOS/Firmware:
http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=startdown&id=1572&lang=en

-Nate

Thanks Nate, I'll check it out!  Has there been any updates to intel firmware etc since the last bios mod?

This Marvell update is the only one I can find thus far. I scoured that website looking for more for Intel and didn't see any.
I will continue and see what I can come up with.

-Nate


Awesome Nate thank you!