Adding processor microcode (cpuid) to the hp probook 470 g4

[puchpunk]

Привет! На ноуте HP probook 470 g4 вышел из строя процессор Intel Core i7 7500u (cpuid 806e9), на замену нашелся только инженерный образец QKJW (продавец сказал, что у него 406e8 cpuid). В моем биосе нет поддержки такого процессора, самостоятельно добавить не смог. Прилагаю исходный файл дампа, прочитанный на программаторе. Помоги мне, пожалуйста.

[DeathBringer]

Explain exactly what happens when you try to boot with your QKJW.

[puchpunk]

I connect the AC unit, the lamp on the power button lights up and goes out, then I press the power button, it turns on, the power, mute and wlan lamps light up. The Caps lock and Num lock lamps blink together slowly 5 times, then the fan turns on at maximum speed, all voltages rise except + vccgt.

[DeathBringer]

With native or modded BIOS?

[puchpunk]

With the original. It turns off only by holding the power button for a long time.

[DeathBringer]

Try to flash my mod and describe results.

[puchpunk]

Everything is the same, only now caps lock and num lock began to flash differently - 3 long, 2 short.
Moved the ddr module to a different slot, caps lock and num lock are blinking slowly constantly.

[DeathBringer]

So it isn't microcode problem.

[puchpunk]

caps lock and num lock flash again 5 times.
That is, it does not go through initialization, processor is good?

[DeathBringer]

Current BIOS hasn't support for ES CPU.
Try to flash old versions of BIOS for this laptop.