Alienware Aurora R1 mobo bricked ?

[Aleas]

Hello,

Hope I am posting in the correct section, I don't speak perfect English so I don't understand everything.

I did some research and I can't find a solution to my problem, but I arrived on this forum where I thought that maybe we could help me.

I have a problem with an Alienware Aurora ALX (R1) PC, I wanted to update the BIOS and there was a power failure... Now the computer starts up but no longer displays anything. It beeps when I remove the RAM or when I plug in a USB drive. But these are the only signs of life that I can get.
I tried to create a key with Crisis BIOS recovery but I cannot extract .rom file from .bin file found in .exe. And since I do not understand everything I am afraid of going about it badly.

Is it possible to do something or the motherboard is bricked in your opinion?

Thank you in advance.

[GioCap]

Yes friend,
it's bricked, but may be there is a Recovery Procedure for it.
Please post your bios version, link to producent bios download and desciption and model of your pc (more infos is better).
I will try to help You, but if isn't possible then You have to consider to buy an SPI Programmer and a Pomona Clip ...

https://www.bios-mods.com/forum/Thread-R...5#pid74575

https://www.bios-mods.com/forum/Thread-G...programmer

Then We will rebuild your bios and You can rewrite it back !
Let me know
Regards

[Aleas]

Thanks so much for helping me!
Ok for the BIOS it's here:
https://www.dell.com/support/home/en-us/...erid=9dcy7

And my PC:
http://www.notebookreview.com/desktoprev...lx-review/
But I have an i7 930 instead of the 975, 12gb ram and not the same GPU.
And the motherboard is one: Alienware MicroATX LGA 1366 Intel X58
I don't know if you have everything you need ?

And for the SPI Programmer and the Pomona Clip I will buy them if necessary. I didn't know them, they are very interesting tools !

Thanks again.
Regards

[GioCap]

I found this file for You, but You will rewrite back by SPI Programmer.
Before to write this one , It's better make a Firmware Dump by SPI Programmer and upload here foe me,
so even it's possible to get all yours PC informations !
let me know
Regards

https://www.mediafire.com/file/cfhb8tibo...).rar/file

[Aleas]

Ok awesome ! So I'll buy what I need and get back to you.
Thanks a lot !

Regards

[Aleas]

I received the clamp and the programmer but could not detect the BIOS chip with the software, I tried on several different PCs and nothing changes. I have followed a lot of guides and videos and I really can't do it. I really don't understand why.
Regards

Edit: I passed a test with the chipset of my graphics card. So it's not the received hardware that has a problem apparently.