Asus M3A78-EM BIOS 2501 Asus 2.1 SLIC

[Dogma]

Asus M3A78-EM 2501 SLIC 2.1
-Manufacturer: Asus
-Motherboard Model: M3A78-EM
-Bios revision: 2501
-Bios Type: AMI BIOS
-Bios Download Link: ftp://ftp.asus.com/pub/ASUS/mb/socketAM2...S-2501.zip


I want to thank you for doing version 2401 of this BIOS, it worked great,
But it turns out Asus had some issues with it booting right, and so do I.

So if you would not mind, they came out with an update to help this problem.

Thank you again, you guys are great.

[DMAN999]

ASUS_M3A78-EM_2501_ASUS_SLIC_2.1_SSV3.rar
http://www.sendspace.com/file/gtvgc2

If you apprecaite this donate to keep this site going.
DMAN aka NoJuan

@ ADMINS,
I hope this was alright for me to post,
if not feel free to delete this post.

[1234s282]

Here you go , i used Asus2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Asus%20M3...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[Dogma]

Windows did not like the bios.
Also the tool I used (SLIC_ToolKit_V3.2) to check the said no SLIC Table.

Re-flashed 2401 and back to normal.

I did follow all steps with command prompt as well.

[1234s282]

strange because i modded it exactly the same?

will have another look tomorrow , its getting late now

Sorry
Admin

[Dogma]

maybe it did not flash right, may give it another try tonight.

[1234s282]

Try again , same instructions

http://dl.dropbox.com/u/747181/Asus%20M3...34s282.zip

Regards
Admin

[Dogma]

I tried the updated file, and it WORKED!


Thank you again, you guys are great.