BIOS Update for 7850 Black Edition on MCP61SM

[japmax96]

Hmm I got this eror I forgot to mention when I tried the Bios update from Acer Before.

(on board bios not award BIOS)

Will this have any affect updating with above mentioned BIOS? Will I get the same error? and also at this point I don't want to risk anything and just use the 5800 do I need to update the BIOS I currently have the R01-B3 ...

[TheWiz]

To use the 5800 you should not have to update your BIOS, however if you want full OC options and an unlocked BIOS you will need to use the guide in the previous post.

TheWiz

[japmax96]

awdflash M613Z_19.BIN /py /sn /cc / cd /cp /wb /r


I'm stuck on this part do I use this BIN ^ or the one you provided abit_unlocked.Bin

I used the abit unlocked one but nothing happens it just shows some lines of information with the c command at the bottom.

---

Ooops I forgot the /cc lol gonna try it again.

---

Dang same thing it said I was missing something Nforce Mac Guide with /wb. lol I dunno

[TheWiz]

Can you attach a picture of what's going on I've never heard of that in all my life.

Ohhh I think its talking about the MAC on the LAN will be changed on the flash. I'm pretty sure a /f to the command line will force it to start the flash.

And I HIGHLY reccommend not flashing till I give the thumbs up

TheWiz

[japmax96]

Oh ok..

I get a very similar screen like this with pretty much the exact description. I copied it from another website.

AWDFLASH v8.83 (06/19) ©Phoenix Technologies Ltd. 2007 All Rights Reserved

Usage: AWDFLASH [FileName1] [FileName2] [/[/...]]
FileName1 : New BIOS Name For Flash Programming
FileName2 : BIOS File For Backing-up the Original BIOS
?: Show Help Messages
py: Program Flash Memory pn: No Flash Programming
sy: Backup Original BIOS To Disk File sn: No Original BIOS Backup
Sb: Skip BootBlock programming Wb: Always Programming BootBlock
cd: Clear DMI Data After Programming cc: Clear CMOS Data After Programming
cp: Clear PnP(ESCD) Data After Programming
LD: Destroy CMOS Checksum And No System Halt For First Reboot
After Programming
QI: Qualify flash part number with source file
E: Return to DOS After Programming R: RESET System After Programming
cks: Show update Binfile checksum cksXXXX: Compare Binfile CheckSum with XXXX
vgaXX: Change to VGA mode XX(Hex value). ch: Update HOLE.
Hx: Only update the specified Hole(0~7). custid:xxxxxxxx
NVMAC:XXXXXXXXXXXX NVGUID:XXXXXXXXXXXXXX
Support nForce Input MAC,GUID Function,with "/wb" to update MAC and GUID.
Example: AWDFLASH 6A69R000.bin /py/sn/nvmac:xxxxxxxxxxxx/wb

[lecky2010]

Hmm I got this eror I forgot to mention when I tried the Bios update from Acer Before.

(on board bios not award BIOS)

Will this have any affect updating with above mentioned BIOS? Will I get the same error? and also at this point I don't want to risk anything and just use the 5800 do I need to update the BIOS I currently have the R01-B3 ...

you get that error using winflash on win 7 you got to change compatability to xp sp3 and its ok not that i would flash through windows like

[viogrep]

I dont really enjoy bumping old post. But this is exactly what I'm searching for.
Unfortunately 1234s282's bios mod link doesn't work anymore.

1234s282 or anyone else have a link to the flash for the MCP61SM-AM that will support the 7850 black edition? (The cpu was a gift, but im WAY too poor to afford another CPU or MOBO. Please.

[1234s282]

You may try this at your own risk:

http://dl.dropbox.com/u/747181/Retail%20...34s282.zip

I took the Retail Abit Unlocked bios and added microcodes / updated AGESA module for theoretical Kuma Support.

Let us know how you go

Regards
Admin

[viogrep]

You may try this at your own risk:

http://dl.dropbox.com/u/747181/Retail%20...34s282.zip

I took the Retail Abit Unlocked bios and added microcodes / updated AGESA module for theoretical Kuma Support.

Let us know how you go

Regards
Admin

Bud, its still 404 for me. The DL link. ;(

[1234s282]

strange!!

Try this one:

http://db.tt/j0trkmZ

Regards
Admin