DELL M18X A03 BIOS THROTTLE REMOVAL GTX580M SLI

[AHMED HOSSAM]

angelknight : can you tell me please from which post you have downloaded this A00 bios , as i want to remember is this modified or original one .

[barcode]

angelknight : can you tell me please from which post you have downloaded this A00 bios , as i want to remember is this modified or original one .

Also i just noticed his using a 2960xm cpu. I'm 100% sure A00 bios will not support this as well.
The only difference between A02 and A03 was cpu support and a few gpu fan control adjustments added according to dell support page

[AHMED HOSSAM]

may be he used my modified bios , but i`m not sure from that .

i will wait his reply.

[barcode]

Hi Mumak,

I just found out why it was throttling on battery mode, I had my battery mode setting set to power save lol how dumb ^o^ sorry! no throttle on battery detected now except the same as ac power heavy load.

---

may be he used my modified bios , but i`m not sure from that .

i will wait his reply.

So ahmed, there is no way we can re-create the same method used on the M17XR3 with the M18XR1!!

I'm guessing our only hope would be to change the EC values, see what was changed in the M17X between A04 and A08/A07.

Time and patients is the key lol

[AHMED HOSSAM]

Barcode : try using this modified flash utility for flashing the original A00 ( posted by johnkss ) .
then try flashing the modified A00 bios attached with the modified utility :-

http://www.mediafire.com/?il8lurhiulblmf7

i will wait your reply now

[barcode]

Barcode : try using this modified flash utility for flashing the original A00 ( posted by johnkss ) .
then try flashing the modified A00 bios attached with the modified utility :-

http://www.mediafire.com/?il8lurhiulblmf7

i will wait your reply now

Sorry cant test now, as im away from M18X Will test in about 8 hours (remember our time zones are way out Europe - Pacific)

[AHMED HOSSAM]

also , no way to do this in the 18X , as there is no bios that has ECFW which hasn`t got throttle .

there ECFW codes are heavily changed between the A04 A07 or A08 .......... when you see the huge difference , you can say its completely ne FW for these versions !

I trust Mumak doing this mission he has experience in all ECFW .

---

i hasn`t modified ECFW in this bios , just integrate modified modules ( ECFW Is not existed to modify )

in worst case , the ECFW is never touched and you can use blind recovery .

[barcode]

also , no way to do this in the 18X , as there is no bios that has ECFW which hasn`t got throttle .

there ECFW codes are heavily changed between the A04 A07 or A08 .......... when you see the huge difference , you can say its completely ne FW for these versions !

I trust Mumak doing this mission he has experience in all ECFW .

---

i hasn`t modified ECFW in this bios , just integrate modified modules ( ECFW Is not existed to modify )

in worst case , the ECFW is never touched and you can use blind recovery .

Cool np!! I'll test tonight

[0x29a]

We are walking in complete darkness. We don't even know what causes the throttle. I say it is temps. It cannot be power. It's always 870mV under heavy load and if the temps do not exceed 80*C the cards are not throttled.

Identify the cause first and then start your modifications. Furmark is no good. 5*0m line and the drivers are made so to downclock while a user is running particular applications like Furmark for example.

Barcode, make sure you properly identify when the throttle kicks in. Heat up the cards up to 80*C and see what happens. Do not run 3Dmarks. Run some demanding game (e.g. crysis 2) and force the GPU fans to spin slowly using hwinfo. You should be able to reach 80*C easily enough.

[barcode]

also , no way to do this in the 18X , as there is no bios that has ECFW which hasn`t got throttle .

there ECFW codes are heavily changed between the A04 A07 or A08 .......... when you see the huge difference , you can say its completely ne FW for these versions !

I trust Mumak doing this mission he has experience in all ECFW .

---

i hasn`t modified ECFW in this bios , just integrate modified modules ( ECFW Is not existed to modify )

in worst case , the ECFW is never touched and you can use blind recovery .

Well if thats the case im going to ring dell now and get the original A00 bios which should have the ECFW try anyway!