EX58-UD5 Request

[ozthewiz]

Can you mod latest f13q bios with latest Realtek Ethernet, Jmicron raid and Intel roms. And if possible with Realtek audio rom? Thanks. Also I couldn't find Realtek GBE 2.37 rom, I will be very happy if you can send it separately..

[Dansolo]

Try this:

Intel Matrix RAID 10.0
JMicron JMB363 1.08.01
Realtek PXE 2.35

[ozthewiz]

Try this:

Intel Matrix RAID 10.0
JMicron JMB363 1.08.01
Realtek PXE 2.35

Thanks for help...

Realtek rom works perfectly..
Jmicron 1.08.01 didn't work (stuck at initializing host controller) so i used J Micron PCIE to SATA II IDE RAID Controller v1.06.75 from resources.

BTW does anybody know why new realtek roms are invisible at resources section?

[Dansolo]

To verify, you do have JMB363, not JMB368 or something else, right? They have different ROMs, or at least they are different with the files that I have for them (haven't verified contents...). If 363 is correct (197B-2363 - you can check for that in device manager PCI IDs if you don't see it at boot) then maybe your board just doesn't like 1.08.01 (though this is the first issue I've heard with it). I can give you 1.07.14 or 17 if you like. I also have 1.06.79 which is a little newer than what you have.

Edit:

Intel Matrix RAID 10.0
JMicron JMB363 1.07.14
Realtek PXE 2.37 (found it, but untested by me) - by the way, this is unnecessary if you're not actually booting from the network. I just update it because it's so simple.

[ozthewiz]

To verify, you do have JMB363, not JMB368 or something else, right? They have different ROMs, or at least they are different with the files that I have for them (haven't verified contents...). If 363 is correct (197B-2363 - you can check for that in device manager PCI IDs if you don't see it at boot) then maybe your board just doesn't like 1.08.01 (though this is the first issue I've heard with it). I can give you 1.07.14 or 17 if you like. I also have 1.06.79 which is a little newer than what you have.

Edit:

Intel Matrix RAID 10.0
JMicron JMB363 1.07.14
Realtek PXE 2.37 (found it, but untested by me) - by the way, this is unnecessary if you're not actually booting from the network. I just update it because it's so simple.

1.07.14 works perfectly, if you send 1.07.17 I can test it also.
I checked device ids and it says 197B-2362 as you say but on the chip itself writes JMB322 also gigabyte.com specs say the same... But there are no roms for JMB322 on the internet... Also in device manager its recognized as JMicron JMB36X Controller.. There is some weirdness going on

Realtek PXE 2.37 seems ok too.. (I am not booting from network.. But like to stay updated)

BTW I have found Intel rom 8086-2822_v10.1.0.1008 you probably have it already, but I attached it anyway...

Thanks again for your help

[Dansolo]

I actually didn't have that, so thanks for bringing it to my attention. I'll attach 1.07.17, but it came from a board with JMB361, so I don't know if it's the same.

[Dansolo]

Intel Matrix RAID 10.1.0.1008
JMicron JMB363 1.07.17 (I patched the file from before for the correct device ID of 2363)
Realtek PXE 2.37

[s650mb]

New beta firmware F13T

Modify please to new Intel Matrix, JMicron and Realtek.

[Dansolo]

Intel AHCI 1.20E -> 1.20E+0027 (device 3A22)
Intel Matrix RAID 10.5.0.1034 (newer than what the previous poster posted)
JMicron JMB363 1.07.25
Realtek PXE 2.39

Untested

[Burning Fish]

F13U was recently released. It now has a very welcome quick-boot option. Can someone mod the bios with the latest Intel RAID, JMicron and Realtek ROM's? I'm sorry I have absolutely no idea where to find these ROM's myself.