HP ProDesk 400 G1 DM & i7-4770

[danbankir]

Hi. I have HP ProDesk 400 G1 DM , i whant install in this PC, i7-4770, but BIOS not support this cpu(( Have you mod BIOS, for this Nettop?

[DeathBringer]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with supported CPU.

[danbankir]

Done!

[bouc]

take care of the TDP, this model does only support 35W TDP (cooling and psu)
the TDP of the 4770 is 84W

[danbankir]

This nettop can be with i3, i5 and i7-4560T .

TDP of the 4770 is 84W - mainbord can be crash?

[DeathBringer]

Describe in details what happens when you tried to boot with i7-4770.
Make a photo of nettop's motherboard near a socket.

[danbankir]

Done!

[danbankir]

Datasheet

[DeathBringer]

This motherboard have two phases only. So low powered CPUs are recommended only,
Unlocking limit may be very dangerous!

1. Make DOS USB-stick (e.g, by Rufus).
2. Download AMI Flash Utilities
3. Extract and copy files from amiflash\Aptio\afudos\afudos.zip\AfuDos\ to USB stick with native DOS
4. Boot from bootable USB stick with native DOS
5. Run
afudos bios.rom /o
Zip and upload result file bios.rom

[danbankir]

This motherboard have two phases only. So low powered CPUs are recommended only,  
Unlocking limit may be very dangerous!

Ok. I don`t do this! Thanke you!