![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
Hi, I'm pulling my hair out with this x86 network device.
bios info: AMI aptio V
Hardware: CASwell COB-H500
its OEM product, no support is available.
Device has no monitor output, Screen is redirected to serial port(VT100).
I have already tried the list below.
- cmospwd -> no luck
- I read the BIOS using ch341, and checked with UEFITool, I thought I could find something useful. All I could find was the invalid part, which was "161406223039397D161A17781D6065657C19"
I used this https://www.dcode.fr/xor-cipher tool to decode it; it was "CASwell(COB-H500)L"
I tried different combinations to enter the password with this text. None of them were successful.
- AMITSESetup region check -> all values were zero. so I couldn't retrieve any hash.
- There was another SPI EEPROM under the CPU (no, it wasn't I2C); I removed it; the computer boots but still requests a password. I checked the eeprom file, and it looks like some executable is lying there because I found FINI text inside. The chip is ST M95128.
- It is not giving any code after unsuccessful password attempts. So no luck with that.
- sure cmos reset not works since password is hard-coded.
Could you please give me some hints?
Thank you.
bios info: AMI aptio V
Hardware: CASwell COB-H500
its OEM product, no support is available.
Device has no monitor output, Screen is redirected to serial port(VT100).
I have already tried the list below.
- cmospwd -> no luck
- I read the BIOS using ch341, and checked with UEFITool, I thought I could find something useful. All I could find was the invalid part, which was "161406223039397D161A17781D6065657C19"
I used this https://www.dcode.fr/xor-cipher tool to decode it; it was "CASwell(COB-H500)L"
I tried different combinations to enter the password with this text. None of them were successful.
- AMITSESetup region check -> all values were zero. so I couldn't retrieve any hash.
- There was another SPI EEPROM under the CPU (no, it wasn't I2C); I removed it; the computer boots but still requests a password. I checked the eeprom file, and it looks like some executable is lying there because I found FINI text inside. The chip is ST M95128.
- It is not giving any code after unsuccessful password attempts. So no luck with that.
- sure cmos reset not works since password is hard-coded.
Could you please give me some hints?
Thank you.
![[Valid RSS]](valid-rss.png "Validate my RSS feed")