Well I got the thread notification so well done TheWiz, makes life a little easier.
John, your EFI BIOS probably gives you squat options but is 4MB big lol, makes me wonder what they do with all that space.
For overclocking was there something specific or just overall? I guess your looking for more than just OC'ing the CPU through BCLK. For instance my own EFI BIOS has disabled menu options for RAM timing. Enabling the menu gives the option but doesn't actually do anything and enabling disabled options without proper support could possibly cause other problems, worse being bricking the machine but probably just doing nothing. Just so your aware.
If you have a spare 5mins would you be able to dump the BIOS via RwEverything using a start address of FFC00000 and an end address of FFFFFFFF. That should give you a 4MB file which you could then check against your Flashit dump using the cmd line in windows "FC /B backup.fd MFFC0000.bin >diff.txt". The only differences in diff.txt, if any, should be in the NV store section. If it's too much bother though no problem.
How were you trying to open the BIOS before and how were you hoping to patch it?
(08-24-2010, 12:03 AM)Sgt-Pepper Wrote: If you used that start and end address shown in your RwEverything SS then that is incorrect. The end address should be FFFFFFFF and the start address will depend on the size of your BIOS. FFF00000 for 1MB, FFE00000 for 2MB etc.
If you successfully backed up with flashit then how big was the file "backup.fd" or whatever you called it?.
You could post or PM a link of your BIOS backup if you wish, but be aware that it will probably contain the serial numbers of your machine / disk drives, and I'll take a look at it for you.
What are you hoping to achieve by modding the BIOS?
Thanks TheWiz for fixing subscribed threads.
hummmm.... mine came out to be 4 megs
ill redo it now and pm it to you or send you a link to it.
im looking to unlock the over clocking. if i can't..this laptop goes up for sale.
thewiz:
thanks, because that's why it's taking me so long to get back...i have to remember to come here...lol
edit:
ok, it read at 1 meg, but there are no options listed just some serial information and something about on board vga, but no options for changing.
Posts: 23
Threads: 0
Joined: Jan 2010
Reputation:
0
09-12-2010, 06:18 AM (This post was last modified: 09-12-2010, 06:21 AM by Sgt-Pepper.)
(08-25-2010, 11:04 AM)johnksss Wrote: hummmm.... mine came out to be 4 megs
ill redo it now and pm it to you or send you a link to it.
im looking to unlock the over clocking. if i can't..this laptop goes up for sale.
edit:
ok, it read at 1 meg, but there are no options listed just some serial information and something about on board vga, but no options for changing.
Sounds like Johnksss resigned and has probably sold the laptop. Anyway, if someone else should come across this thread some time later I would like to add the following. I never got to look at Johnksss's BIOS but I did find 1.05 posted for the NV79 Gateway. The BIOS size is 4MB. Too many options to post as text but I'll post those options that might be relevant to overclocking as that was of interest to the OP. Of course, seeing the options in the setup does not guarantee they will work if enabled, but hopefully a least some will.
Code:
-------------------------------------------------------------
Power - Advanced CPU Control
-------------------------------------------------------------
P-States(IST) (Disabled:Enabled)
Boot Performance Mode (Max Battery:Max Performace}
CMP Support (Auto:Disabled)
HT Support (Auto:Disabled)
C-States (Disabled:Enabled)
Enhanced C-States (Disabled:Enabled)
Enable C6 (Disabled:Enabled)
Enable C7 (Disabled:Enabled)
Turbo Mode (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Platform Thermal Configuration
-------------------------------------------------------------
Shut Down Temperature
Low Fan Speed Temperature
High Fan Speed Temperature
Throttle On Temperature
CPU Temp Read (Disabled:Enabled)
CPU Energy Read (Disabled:Enabled)
MCH Temp Read (Disabled:Enabled)
PCH Temp Read (Disabled:Enabled)
Alert Enable Lock (Disabled:Enabled)
TS on DIMM (Disabled:Enabled)
DIMM1 TS READ (Disabled:Enabled)
DIMM2 TS READ (Disabled:Enabled)
DIMM3 TS READ (Disabled:Enabled)
DIMM4 TS READ (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Cpu Thermal Configuration
-------------------------------------------------------------
DTS (Disabled:Enabled:Critcal Reporting)
Bi-directional PROCHOT# (Disabled:Enabled)
Intelligent Power Sharing (Disabled:Enabled)
CPU Turbo (Disabled:Enabled)
MCH Turbo (Disabled:Enabled)
IPS Policy (DRIVER:PROCESSOR:BALANCED:GRAPHICS)
Core Temp Limit (Disabled:Enabled)
Core Temp Limit Value
MCH Power Limit (Disabled:Enabled)
MCH Power Limit Value (Disabled:Enabled)
Processor Power Limit (Disabled:Enabled)
Processor Power Limit Value
Core Power Limit (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Arrandale QPI Options
-------------------------------------------------------------
QPI Frequency (Auto:3.200 GT:4.800 GT:5.866 GT:6.400 GT}
Memory Frequency (800:1066:1333)
Note to admin, its hard on the formatting when the board strips spaces and tabs in code sections after preview.
Okay, some time ago a guy called Marcan made some super python scripts for dumping the setup so here's one of those dumps of the above for those interested.
(08-25-2010, 11:04 AM)johnksss Wrote: hummmm.... mine came out to be 4 megs
ill redo it now and pm it to you or send you a link to it.
im looking to unlock the over clocking. if i can't..this laptop goes up for sale.
edit:
ok, it read at 1 meg, but there are no options listed just some serial information and something about on board vga, but no options for changing.
Sounds like Johnksss resigned and has probably sold the laptop. Anyway, if someone else should come across this thread some time later I would like to add the following. I never got to look at Johnksss's BIOS but I did find 1.05 posted for the NV79 Gateway. The BIOS size is 4MB. Too many options to post as text but I'll post those options that might be relevant to overclocking as that was of interest to the OP. Of course, seeing the options in the setup does not guarantee they will work if enabled, but hopefully a least some will.
Code:
-------------------------------------------------------------
Power - Advanced CPU Control
-------------------------------------------------------------
P-States(IST) (Disabled:Enabled)
Boot Performance Mode (Max Battery:Max Performace}
CMP Support (Auto:Disabled)
HT Support (Auto:Disabled)
C-States (Disabled:Enabled)
Enhanced C-States (Disabled:Enabled)
Enable C6 (Disabled:Enabled)
Enable C7 (Disabled:Enabled)
Turbo Mode (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Platform Thermal Configuration
-------------------------------------------------------------
Shut Down Temperature
Low Fan Speed Temperature
High Fan Speed Temperature
Throttle On Temperature
CPU Temp Read (Disabled:Enabled)
CPU Energy Read (Disabled:Enabled)
MCH Temp Read (Disabled:Enabled)
PCH Temp Read (Disabled:Enabled)
Alert Enable Lock (Disabled:Enabled)
TS on DIMM (Disabled:Enabled)
DIMM1 TS READ (Disabled:Enabled)
DIMM2 TS READ (Disabled:Enabled)
DIMM3 TS READ (Disabled:Enabled)
DIMM4 TS READ (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Cpu Thermal Configuration
-------------------------------------------------------------
DTS (Disabled:Enabled:Critcal Reporting)
Bi-directional PROCHOT# (Disabled:Enabled)
Intelligent Power Sharing (Disabled:Enabled)
CPU Turbo (Disabled:Enabled)
MCH Turbo (Disabled:Enabled)
IPS Policy (DRIVER:PROCESSOR:BALANCED:GRAPHICS)
Core Temp Limit (Disabled:Enabled)
Core Temp Limit Value
MCH Power Limit (Disabled:Enabled)
MCH Power Limit Value (Disabled:Enabled)
Processor Power Limit (Disabled:Enabled)
Processor Power Limit Value
Core Power Limit (Disabled:Enabled)
-------------------------------------------------------------
Advanced - Arrandale QPI Options
-------------------------------------------------------------
QPI Frequency (Auto:3.200 GT:4.800 GT:5.866 GT:6.400 GT}
Memory Frequency (800:1066:1333)
Note to admin, its hard on the formatting when the board strips spaces and tabs in code sections after preview.
Okay, some time ago a guy called Marcan made some super python scripts for dumping the setup so here's one of those dumps of the above for those interested.
johnksss hasn't resigned. but i did sell the laptop.
and this bios part you posted...is that an insyde bios?
also. there never was a bios download for the nv7915u
but now im on a new project. asus g73jh...does this script idea work on that bios?
Posts: 23
Threads: 0
Joined: Jan 2010
Reputation:
0
Resigned as in resigned to not finding a solution for the Gateway BIOS. Yes, it's an Insyde job and although there didn't seem to be a download at that time, one can now be found here.
I'm taking the NV79 BIOS as being generic across all NV79 models, if it's not then perhaps it's not the proper BIOS for your sold laptop.
Don't know about your new Asus but generally hear good things about Asus notebooks. Might get myself one when the time comes to renew, but for now stuck with Core 2 Duo for a year or 2 more I think.
09-12-2010, 10:42 AM (This post was last modified: 09-12-2010, 10:47 AM by johnksss.)
(09-12-2010, 10:21 AM)Sgt-Pepper Wrote: Resigned as in resigned to not finding a solution for the Gateway BIOS. Yes, it's an Insyde job and although there didn't seem to be a download at that time, one can now be found here.
I'm taking the NV79 BIOS as being generic across all NV79 models, if it's not then perhaps it's not the proper BIOS for your sold laptop.
Don't know about your new Asus but generally hear good things about Asus notebooks. Might get myself one when the time comes to renew, but for now stuck with Core 2 Duo for a year or 2 more I think.
thats not why...my download sections looks nothing like that. how exactly did you get there?
and more importantly...can you make changes to the bios?
ahh, nevermind..i see your link now...lol
[censored], no wonder...that's in AU. and the us site looks completely different.
Posts: 23
Threads: 0
Joined: Jan 2010
Reputation:
0
I haven't played with Insyde in a looong... time. I think the only way to say you can make changes to a BIOS firmware is to actually have successfully done it. Until that time it's an unknown. AFAIK 1234s282 is looking into Insyde BIOS modding but it seems a moot point now that you have sold your Gateway.
Yeah, those Gateway sites give you different results depending on which country you select.
Is your Email thread subscription notification working? Mine seems to have stopped.
Notification has been working for my threads. I haven't really editied the scripts for putting code on the board, but if you had some suggestions on PHP based stuff I'd look into it.
(09-12-2010, 01:10 PM)Sgt-Pepper Wrote: I haven't played with Insyde in a looong... time. I think the only way to say you can make changes to a BIOS firmware is to actually have successfully done it. Until that time it's an unknown. AFAIK 1234s282 is looking into Insyde BIOS modding but it seems a moot point now that you have sold your Gateway.
Yeah, those Gateway sites give you different results depending on which country you select.
Is your Email thread subscription notification working? Mine seems to have stopped.
yes, mine is working now. that's why i was getting back so soon...but this time i was on the road, so it took a little longer..
and the insyde bios is NEVER a moot point. way to many laptops using this bios now...so now is the time to get familiar with it..
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Image: nv79.png]](http://img521.imageshack.us/img521/2820/nv79.png)
![[Valid RSS]](valid-rss.png "Validate my RSS feed")