OptiPlex 360 380 760 780 960 Xeon LGA 771 E0 1067A Microcode

[ar-min]

can someone please send optiplex 960 moded bios  again ?


and another question
is it possible to use e5462 xeon on Optiplex 960 sff ?

thank you

[Hexamir]

Hi,
I update bios DELL Optiplex 760 SFF A16 with Xeon microcodes, when i put Xeon L5420 and run computer, he don't start, only orange light. Any help?

[genius239]

Hi,
I update bios DELL Optiplex 760 SFF A16 with Xeon microcodes, when i put Xeon L5420 and run computer, he don't start, only orange light. Any help?

G31,G41 should support 5xxx Series,3xxx Series,45nm,65nm
Q43,Q35,Q45 should support 3xxx Series,45nm,65nm NOT 5xxx Series
(thanks to delidded.com/lga-771-to-775-adapter/2/)

[mknrls]

will this bios also work on USFF models?

[Tanados]

Hi, just for know, is this normal ?
https://www.virustotal.com/#/file/533a63.../detection

[TerrorUniverso]

hi, i have a Dell 780 SFF ( Q45 chipset) and just bought a xeon x3363, do i need a bios mod to run this cpu?
Thanks

[freeGHost]

hi, i have a Dell 780 SFF ( Q45 chipset) and just bought a xeon x3363, do i need a bios mod to run this cpu?
Thanks

BiOS for Dell Optiplex 780:

• Original - https://drive.google.com/file/d/1seJY7hw...sp=sharing
  
• BiOS Pack with microcodes for 771 (include Dell Optiples 780): https://pan.baidu.com/s/1eRBUDPK
  

My configuration:

• Platform: Dell Optiplex 780 SFF
  
• CPU: Intel Xeon X3363
  
• RAM: 4x 4 Gb
  
• Video: NVidia GeForce GT 710
  
• BiOS: O780-A15 1067A-771
  

[cathalferris]

Hi everyone.
I can confirm that there's no booting of an E5450 on an Optiplex 5450, with unmodded bios A18.
The CPU I got to try this is a C0 stepping SLANQ that I had purchased before seeing the page on delidded.com that these Dells do not work with the 5-series Xeons for whatever reason.
Is there any point in trying the modified Optiplex bios that enables E0 stepping Xeons from earlier in the thread? The current cpu is an E8400 core2duo. Is it likely that the modified bios would enable the 5-series Xeons?

[cathalferris]

I tried the E0-stepping modified bios, to no avail.

The little SFF pc still amber flashes "2 3 4" on attempted boot, even after a full BIOS reset. "No Bios" error is apparently what that sequence means. Effectively just no support for that chip in that board. Has anyone seen a way around the dual CPU check that the Dell Q43/45 ICH10 boards appear to be performing, that is apparently the underlying reason why this little PC is refusing to boot with the E5450 chip onboard? That PC definitely does support the Q9650 so in theory should support all the 771 xeons, though delidded.com notes that the Qxx chipsets do not work with 5-series Xeons.

I put the E8400 back in and got "Unsupported Processor" error on boot, so applied the Dell standard A18 bios and that cleared that problem up. Probably because the E8400 references in the modded bios were overwritten with the E0 steppings.
Looks like I will be watching eBay for a decent cheap-but-good LGA775 ATX motherboard known to work with the 771 chips, to build up a PC around that Xeon, if I don't get it booted in the 960.

[DeathBringer]

Hi everyone.
I can confirm that there's no booting of an E5450 on an Optiplex 5450, with unmodded bios A18.

Optiplex 5450?