Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 3 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phenom II on Gigabyte GA-M57SLI-S4
#51
This has something to do with ACPI tables then (which control the multiplier) unless you have a bios setting that will let you change the multiplier to its proper speed??)

TheWiz knows a little about this , i know nothing about this Sad

Sorry
Admin

[Image: adminsig.jpg]

I will not be held responsible for anything that may go wrong with your BIOS, and by downloading a modded bios you are held responsible for what you choose to do with it. Big Grin


Looking for a whitelist disabled HP bios?
www find
quote
#52
(12-07-2010, 01:59 AM)1234s282 Wrote: This has something to do with ACPI tables then (which control the multiplier) unless you have a bios setting that will let you change the multiplier to its proper speed??)

TheWiz knows a little about this , i know nothing about this Sad

Sorry
Admin

i have CPU multiplier change in BIOS, but it has no effect.. cpu-z and other soft shows the 800mhz, only FSB changes.
find
quote
#53
TheWiz heeeeeeeeeeeeeeeeeeeelp Huh
i can setup some remote desktop or something like that if it would help

also attaching "RW-Everything Utility" dump information and DMIinfo for processor


Attached Files Thumbnail(s)
   

.txt   m57.txt (Size: 34.75 KB / Downloads: 2)
find
quote
#54
update:

i got newest "FHo" bios from OFFICIAL SUPPORT, it should work Smile!
wow it will be the only AM2+ mobo with latest phenom support Smile

will try today later
find
quote
#55
(12-08-2010, 10:45 AM)sshilko Wrote: update:

i got newest "FHo" bios from OFFICIAL SUPPORT, it should work Smile!
wow it will be the only AM2+ mobo with latest phenom support Smile

will try today later

no luck with bios settings,
BUT using nforce system tools i set cpu multiplier and FSB Smile it worked at last

Big Grin


Attached Files
.rar   m57sls42.rar (Size: 310.42 KB / Downloads: 33)
find
quote
#56
now nforce 5-series can be updated to support AM3 phenom II Smile

i.e. asus M2N and other board for nforce 570
find
quote
#57
Sorry it took so long to weigh in.

Do you have links for the boards you know that are now supporting this. The 800mhz issue is a huge issue because of the motherboard "phase" design.

Thanks,
TheWiz
www find
quote
#58
(12-16-2010, 05:02 PM)TheWiz Wrote: Sorry it took so long to weigh in.

Do you have links for the boards you know that are now supporting this. The 800mhz issue is a huge issue because of the motherboard "phase" design.

Thanks,
TheWiz

it's should be any nforce 570 board, i fixed 800mhz with nforce system tools, now processor works at 4000Mhz / 39*C, bios/nforce-tools max multiplier is 19.5

nFORCE 570 MOBOS (AM2 actually):
(gigabyte has maximum supported cpus list + my Phenom II 560 with FHo bios)

ASUS
M2N-E
M2N-SLI Deluxe
Gigabyte
GA-M57SLI-DS4
GA-M57SLI-S4
MSI
K9N Platinum
K9N SLI
K9N SLI Platinum
K9N SLI V2
K9N Ultra

the only minor issue's left is:
*800mhz without booting to Windows (HOWEVER DURING BIOS-POST SCREEN SHOWS CORRECT 3400Mhz)
*no cool&quiet support, the voltage is always = bios settings, setting to 1.45V is OK but processor goes to 40*C and fans go >1100rpm, IF IT WAS <1.4V processor should go 33-35*C and wans would be more quiet.
but using nTune (nforce system tools) you can thange processor clock/fsb/multiplier with 1click in windows by just loading preset profiles at windows startup/etc.
find
quote
#59
http://www.bios-mods.com/forum/Thread-AM...ful?page=2


Any changes of core unlocking on AM2+ chipset nforce 570?
MOBO: http://gigabyte.ru/products/mb/cpulist/g...s4_20.html
BIOS: (attached)

tips: i think it's possible because nforce 590 is unlocking : http://www.bios-mods.com/forum/Thread-Gi...l-2-1-SLIC


Attached Files
.rar   m57FHo.rar (Size: 310.42 KB / Downloads: 1)
find
quote
#60
(12-20-2010, 07:20 AM)sshilko Wrote:
(12-16-2010, 05:02 PM)TheWiz Wrote: Sorry it took so long to weigh in.

Do you have links for the boards you know that are now supporting this. The 800mhz issue is a huge issue because of the motherboard "phase" design.

Thanks,
TheWiz

it's should be any nforce 570 board, i fixed 800mhz with nforce system tools, now processor works at 4000Mhz / 39*C, bios/nforce-tools max multiplier is 19.5

nFORCE 570 MOBOS (AM2 actually):
(gigabyte has maximum supported cpus list + my Phenom II 560 with FHo bios)

ASUS
M2N-E
M2N-SLI Deluxe
Gigabyte
GA-M57SLI-DS4
GA-M57SLI-S4
MSI
K9N Platinum
K9N SLI
K9N SLI Platinum
K9N SLI V2
K9N Ultra

the only minor issue's left is:
*800mhz without booting to Windows (HOWEVER DURING BIOS-POST SCREEN SHOWS CORRECT 3400Mhz)
*no cool&quiet support, the voltage is always = bios settings, setting to 1.45V is OK but processor goes to 40*C and fans go >1100rpm, IF IT WAS <1.4V processor should go 33-35*C and wans would be more quiet.
but using nTune (nforce system tools) you can thange processor clock/fsb/multiplier with 1click in windows by just loading preset profiles at windows startup/etc.
more info, 800mhz is common issue, more tools to deal with it
http://forums.guru3d.com/showthread.php?p=3779320
http://sourceforge.net/projects/phenomms...i/download
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in