[REQUEST] Acer Aspire E1-572(G,P) Bios Unlock

[Dudu2002]

hi 
I apologize if simple questions

i have a Acer Aspire E1-572G-54204G75Mnkk

 and my current bios version is 2.13

i need bios 2.17   and need unlock 

please help me

https://www.sendspace.com/file/i30hum

run and report

[shintaro]

hi 
I apologize if simple questions

i have a Acer Aspire E1-572G-54204G75Mnkk

 and my current bios version is 2.13

i need bios 2.17   and need unlock 

please help me

https://www.sendspace.com/file/i30hum

run and report

hi
thank you 
but my system doesn't boot 
and i need to flash using usb

[Dudu2002]

1. format usb-stick no-system, FAT32 !!!! usb-stick old, 0.5-2 Gb
2. copy V5WE2X64.FD to usb-stick
3. Turn off the laptop, unplug the power adapter (removing the battery is not necessary), connect the USB Flash-drive with an image file to restore to the USB-port (recommend using 2.0).
4. Press the "Fn" and not releasing it, press the "Esc" key.
5. Then, hold both of these keys, plug in your laptop power adapter included with the network. "Power" button should flash.
Press the "Power" button, and when the notebook is turned on, release it, the keys "Fn" and "Esc" hold for 5-10 seconds more.
6. Wait for the completion of the recovery procedure. It takes about 3-7 minutes, maybe a little more. On it you will show off a laptop.


http://rgho.st/7JC6M7XM7

[shintaro]

1. format usb-stick no-system, FAT32 !!!! usb-stick old, 0.5-2 Gb
2. copy V5WE2X64.FD to usb-stick
3. Turn off the laptop, unplug the power adapter (removing the battery is not necessary), connect the USB Flash-drive with an image file to restore to the USB-port (recommend using 2.0).
4. Press the "Fn" and not releasing it, press the "Esc" key.
5. Then, hold both of these keys, plug in your laptop power adapter included with the network. "Power" button should flash.
Press the "Power" button, and when the notebook is turned on, release it, the keys "Fn" and "Esc" hold for 5-10 seconds more.
6. Wait for the completion of the recovery procedure. It takes about 3-7 minutes, maybe a little more. On it you will show off a laptop.


http://rgho.st/7JC6M7XM7

hi
thank you again
but doesn't work
when i hold fn and Esc and press power
notebook start beep sound 
but when is release fn and Esc nothing show and notebook not reset or shutdown and when i go to bios setup it show 2.13 bios and not unlock

[Dudu2002]

1. format usb-stick no-system, FAT32 !!!! usb-stick old, 0.5-2 Gb
2. copy V5WE2X64.FD to usb-stick
3. Turn off the laptop, unplug the power adapter (removing the battery is not necessary), connect the USB Flash-drive with an image file to restore to the USB-port (recommend using 2.0).
4. Press the "Fn" and not releasing it, press the "Esc" key.
5. Then, hold both of these keys, plug in your laptop power adapter included with the network. "Power" button should flash.
Press the "Power" button, and when the notebook is turned on, release it, the keys "Fn" and "Esc" hold for 5-10 seconds more.
6. Wait for the completion of the recovery procedure. It takes about 3-7 minutes, maybe a little more. On it you will show off a laptop.


http://rgho.st/7JC6M7XM7

hi
thank you again
but doesn't work
when i hold fn and Esc and press power
notebook start beep sound 
but when is release fn and Esc nothing show and notebook not reset or shutdown and when i go to bios setup it show 2.13 bios and not unlock

http://rgho.st/7Dl4SVJl9

use this file

[shintaro]

1. format usb-stick no-system, FAT32 !!!! usb-stick old, 0.5-2 Gb
2. copy V5WE2X64.FD to usb-stick
3. Turn off the laptop, unplug the power adapter (removing the battery is not necessary), connect the USB Flash-drive with an image file to restore to the USB-port (recommend using 2.0).
4. Press the "Fn" and not releasing it, press the "Esc" key.
5. Then, hold both of these keys, plug in your laptop power adapter included with the network. "Power" button should flash.
Press the "Power" button, and when the notebook is turned on, release it, the keys "Fn" and "Esc" hold for 5-10 seconds more.
6. Wait for the completion of the recovery procedure. It takes about 3-7 minutes, maybe a little more. On it you will show off a laptop.


http://rgho.st/7JC6M7XM7

hi
thank you again
but doesn't work
when i hold fn and Esc and press power
notebook start beep sound 
but when is release fn and Esc nothing show and notebook not reset or shutdown and when i go to bios setup it show 2.13 bios and not unlock

http://rgho.st/7Dl4SVJl9

use this file

doesn't work  
sometime show the picture 
but when i go on bios setup nothing changed version and still lock

[Da Vinci Code]

First, you need decapsulated bios image to allow flashing process in Recovery mode.Bios image from official site is encapsulated.
Second, i see your bios is working good but OS not found.
Try recover system or install new.

[shintaro]

First, you need decapsulated bios image to allow flashing process in Recovery mode.Bios image from official site is encapsulated.
Second, i see your bios is working good but OS not found.
Try recover system or install new.

hi thank you for your helping
how i can decapsulate bios image ?
i cant install any windows or using some program in dos  like Acronis , Active disk , paragon , Gparted 
i change hard and ram 
but problem doesn't solve
i think maybe bios is corrupted
and i need to update bios to 2.17 and unlock to solve problem

[Da Vinci Code]

You must disable Secure Boot from Windows and CSM (you must set Supervisor password activity)

[shintaro]

You must disable Secure Boot from Windows and CSM (you must set Supervisor password activity)

i do that
i change legacy to UEFI and set supervisor and disable secure boot and save and try
but in progress of install windows in first logo windows will crash ..
i changed to legacy, tested with usb and ... but does not work 
in bios sata mode is AHCI and maybe is it problem 
but i cant change it  because i think my bios is lock