[REQUEST] Dell Inspiron 1501 WiFi Whitelist Removal

[KrypteX]

Hello, I would be very grateful if someone could do a WiFi Whitelist Removal + SLIC 2.1 for this laptop:

-Model: Dell Inspiron 1501
-Bios revision: 2.6.3 A16
-Bios Download Link: http://ftp.us.dell.com/bios/Win1501263.EXE
-Current WiFi card: Dell Wireless 1390 WLAN 802.11g
-Card to be installed: Intel Centrino Advanced-N 6205 (62205ANHMW), Dell P/N: 0X9JDY

I already have a SLIC 2.1 version (rghost.net/38306886), but still can't find a BIOS with WiFi Whitelist removed.
Thank you in advance !!

[BDMaster]

Hello, I would be very grateful if someone could do a WiFi Whitelist Removal + SLIC 2.1 for this laptop:

-Model: Dell Inspiron 1501
-Bios revision: 2.6.3 A16
-Bios Download Link: http://ftp.us.dell.com/bios/Win1501263.EXE
-Current WiFi card: Dell Wireless 1390 WLAN 802.11g
-Card to be installed: Intel Centrino Advanced-N 6205 (62205ANHMW), Dell P/N: 0X9JDY

I already have a SLIC 2.1 version (rghost.net/38306886), but still can't find a BIOS with WiFi Whitelist removed.
Thank you in advance !!

Hi friend,
Upload that Bios File Slic 2.1 and We will try to modify to get Whitelist Remove.
Regards

P.S. You have to post Errors on Boot and Original and New PCI/ VEN Cards

[KrypteX]

Sorry, I didn't receive that WiFi card after all. Project dropped. Thanks anyway !

[kilotekpc]

I've upgraded the wireless card inside of my laptop however I have ran into some issues.

I receive this error in Device Manager "This device cannot start. (code 10)" I believe this is due too a bios whitelist. Unlike Lenovo however, I do not receive any error messages or warnings during boot regarding unsupported or unauthorized hardware.

BIOS file: https://www.dell.com/support/home/ca/en/cabsdt1/drivers/driversdetails?driverId=R174470&osCode=BIOSA&productCode=inspiron-1501

Original WiFi card: Dell Wireless 1490 Dual Band WLAN Mini-Card - PCI\VEN_14E4&DEV_4312&SUBSYS_00071028&REV_01

New WiFI card: Intel® WiFi Link 5100 AGN - PCI\VEN_8086&DEV_4237&SUBSYS_12118086&REV_00

I've tried using phoenix tools and hex workshop to edit the Module/BIOS but it's all way over my head and I don't want to [censored] it up, I cant seem to figure it out either. If there is some way to add my device to the whitelist or some way to remove the whitelist entirely, I would greatly appreciate any help with either.

Kind regards,
Kilo