[REQUEST] Lenovo B50-70 (9DCNxxWW) Whitelist Removal

[Colin]

Thanks BDMaster, that worked perfectly!

When I used the USB boot drive I got the "Error 28", so I did it from Windows 8.1 x64 using fptw64 after waking from sleep mode.

Thanks again. Donation on its way.

   

[kieransto]

I'd like to make a request for a Lenovo B50-70 with an Insyde BIOS WIFI whitelist removal. However I'm a total newbie to BIOS modification; What files are required?

Thanks in advance

[Oleh]

I'd like to make a request for a Lenovo B50-70 with an Insyde BIOS WIFI whitelist removal. However I'm a total newbie to BIOS modification; What files are required?

Thanks in advance

http://rghost.ru/8vmL8RyVg
run fptw64 -d bios_damp -bios

and report

[kieransto]

Hi,

Below is a link to the output of that command and also a link to the latest BIOS version for the machine

https://download.lenovo.com/ibmdl/pub/pc...cn32ww.exe
http://rghost.net/6GcwMd8rS

Thanks

[Oleh]

Hi,

Below is a link to the output of that command and also a link to the latest BIOS version for the machine

https://download.lenovo.com/ibmdl/pub/pc...cn32ww.exe
http://rghost.net/6GcwMd8rS

Thanks

http://rghost.ru/8LJ8tQn6z
read Private Messages

[kieransto]

Hi,

The option of flashing using a bootable DOS flash drive resulted in an error 28. However using the sleep method and flashing from within Windows worked.

Thanks Again

[ciubex]

My apologize for this first post, I did not identified any modified bios related with this version / laptop model on the Directory Listing of /BIOS/Whitelists/

It is possible to bypass WiFi BIOS check?

Using another WiFi card (Intel Dual Band Wireless-AC 7265, Model 7265NGW) than the original one I get:

Code:

Unauthorized Wireless network card is plugged in. Power off and remove it

I have a Lenovo B50-70 laptop with a Realtek RTL8723BE WiFi card (M.2 version), my current OS is Ubuntu 14.04 with kernel: 3.19.8-031908-generic.
sudo lspci -vvnn

Code:

09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723] Subsystem: Lenovo Device [17aa:b736] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at c2500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Via message/WAKE# DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Device Serial Number 00-23-b7-fe-ff-4c-e0-00 Capabilities: [150 v1] Latency Tolerance Reporting Max snoop latency: 3145728ns Max no snoop latency: 3145728ns Capabilities: [158 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us Kernel driver in use: rtl8723be

BIOS Information
sudo dmidecode -t 0

Code:

# dmidecode 2.12 SMBIOS 2.7 present. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: LENOVO Version: 9DCN32WW(V3.02) Release Date: 04/18/2015 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 6144 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported UEFI is supported BIOS Revision: 1.50 Firmware Revision: 3.50

Occasionally I use a second HDD with Win7, in this case I used to run BIOS tools and obtain bellow files:
1. results.rar link: https://www.sendspace.com/file/bhn6rc
2. BIOS backup archive, LENOVO-9DCN32WW(V3.02).rom : https://www.sendspace.com/file/4t9oin
3. I used last time this BIOS executable update (9dcn32ww.exe) : https://www.sendspace.com/file/xfudea

Official Lenovo support link to download available BIOS update: http://support.lenovo.com/us/en/products...s/DS101224

I don't know how to identify which BIOS type is currently used. (e.g. AMI or Phoenix)

Are necessary other informations?

Thank you for your time!

[ciubex]

SOLVED

Modded BIOS worked like a charm from the first time, thank you very much for your quick response!

I verified on Win7 and Ubuntu, the new network card can be turned on/off from software buttons too (FN + F7) in both OS.

On Windows was necessary to be installed Intel drivers (Intel WLAN Driver for Microsoft Windows 7 (32-bit, 64-bit) - Lenovo B40-70, B50-70, E40-70 Notebook), but on Ubuntu 14.04 with 3.19.8 kernel the network card was recognized from beginning.

With modified ROM advanced BIOS menu are available.

The new wireless card info:

Code:

09:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095b] (rev 3b) Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [8086:5210] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 53 Region 0: Memory at c2500000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 41d2 Capabilities: [40] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L0s <4us, L1 <32us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE# DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 60-57-18-ff-ff-01-f0-9f Capabilities: [14c v1] Latency Tolerance Reporting Max snoop latency: 3145728ns Max no snoop latency: 3145728ns Capabilities: [154 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=30us PortTPowerOnTime=60us Kernel driver in use: iwlwifi

[ciubex]

I have issues with internal SD Card reader (Realtek Card Reader) it is not recognized by any OS: Windows 7 or Ubuntu.
I assumed a BIOS miss configuration that's why I updated the BIOS version from modded version: 9DCN32WW(V3.02) to official version: 9DCN32WW(V3.02) but still I'm not able to use the SD Card reader.

Questions:
1. Could be a BIOS issue related with SD Card reader? (seems to be an hardware malfunction, after several attempts seems to read the inserted SD card, in that case the just as an information it is on the modded BIOS something related with internal SD Card Reader?
2. Can be modded the newest version too?

I have bellow links:
1. result.rar https://www.sendspace.com/file/0q8o3i
2. LENOVO-9DCN34WW(V3.04).rom https://www.sendspace.com/file/gw8b0f
3. 9dcn34ww.exe https://www.sendspace.com/file/h0xcg9
4. Official page link http://support.lenovo.com/us/en/products...s/DS101224
5. Official executable link https://download.lenovo.com/pccbbs/mobiles/9dcn34ww.exe

[BDMaster]

Here You go :

http://rghost.net/6Fqz2gH6j

Use Sleep Bug (when someone is copied then It means that He is great) !
Let me know
Regards