[REQUEST] Lenovo Y50-70 (9ECNxxWW) BIOS Unlock

[qian3303]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/6ZV8PlTYX

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

(http://rghost.net/6Ng9V9YGg  and http://rghost.net/7PkPqh4Mw ) or attachment.
gpu-z,report,rom;all in this.
now is 3.03,version 1.3 or 1.4 ,which one better?

[FirePhoneix]

Yes mate,
But has name ". . . FirePhoneix.rar (3.26 MB) " as It's using your Bios Backup so You
are writeing back your Bios Backup Modded
About the Video Card You have to check if your MoBo has a system Muxed or Muxless . . .

http://h20566.www2.hp.com/hpsc/doc/publi...g=en&cc=us

http://leshcatlabs.net/forums/viewtopic.php?t=62

As Disabling on Muxed your Laptop will continue to work but on Muxless It will got a Black Screen !

ow To Downgrade :
Snebob (user) suggestion . . .
Run this to downgrade:

http://download.lenovo.com/consumer/mobi...vy2113.exe

Remember to set the Option (BIOS Back Flash) in bios that
enables you to flash an older bios, before you run it. 

Nop (user) suggestion . . .
 
I found another solution - Just in case it was ever needed.
Download the 1.14 version

http://download.lenovo.com/consumer/mobi...cn31ww.exe

Then use 7-zip to extract that .exe file, You will find a platform.ini file into that folder.
Then Look for "BIOSVFEnable=2" and replace it with "BIOSVFEnable=0", run as Administrator InsydeFlash.exe tool and go !
Verified working !

Regards

Works like a charm, thanks bro, will donate when i can soon <3, it seems like it's also latest bios unlocked, 2 questions:

1-I can't set my graphic device to dedicated/nvidia one, (Aka disabling intel and letting my laptop use nvidia) I only get two options which is UMA and Switchable graphics

2-If I updated my bios from lenovo site, would something happen?


VERY ALERTING EDIT: Now i tried to boot again into my bios and i can't, when i shut down my laptop, and try to turn it on from the nova button, it doesn't turn on, nova button is the only way i can get into bios, can you tell me how to get rid of the unlock? it must have caused this... it's weird because it worked first time..... note that it works fine when turning through the normal power button

[qian3303]

I had post this request in Unlocked Insyde BIOSes which was in a wrong place,
The url is https://www.bios-mods.com/forum/Thread-Y...S-question .

http://rghost.net/6Ng9V9YGg 

this zip contains Universal Bios Backup rom , ADID reports and picture about gtx 860 infomation.

Tools14a is here : http://rghost.net/7PkPqh4Mw

if you need more infomation,please to reply.

THX!

[FirePhoneix]

This is urgent!

[BDMaster]

Ok mate,
UMA = UMA means Unified Memory Architecture and the system performs the graphic function with Intel VGA only
Then Switching to other will enable nVidia but You have to know if your system is Muxed or Muxless !
Look here :

https://support.lenovo.com/it/it/documen...=Solutions

http://leshcatlabs.net/forums/viewtopic.php?t=62

Then about the NOVO Button is an EC issue so You can do in this way . . .

Xerivar

Hi BDMaster, thanks for the last info with the U disk.
I did not try it out so far but found a workaround for the "Novo" button not working problem:

- Install Grub boot manager
- Flash to 1.14, so you can use the sleep bug to flash a custom bios.
- Flash to unlocked 3.03 you provided using sleep bug as described in previous posts
- Use Fn + F12 key to get into boot menu and select the grub partition for booting (flashing did reset it for me to boot into windows immediately, might be different for others)
- In Grub, select the "system setup" option. This will make the laptop reboot with some kind of flag set, entering bios immediately after booting, thus eliminating the need for the Novo key
- you will then be able to do bios changes as usual

This allows me to use the modified 3.03 bios on Lenovo Y70-70 !
Only downside is I can not use the lenovo recovery feature from power off, just launch it using windows.
For me that's totally ok compared to fiddling with the hardware

Regards

P.S. If You will update to new Original version then You will need a new Bios Mod !

[BDMaster]

You have Downgrade to the version 1.14 to Unlock Eeprom Chip so
will Flash the Bios Mod over It using the Sleep Bug !

Here You go :

http://rghost.net/7VwhvKpLl

let me know
Regards

Donate to me for my work and time . . . look into my Signature

P.S. Read the Instructions included !

[BDMaster]

You have Downgrade to the version 1.14 to Unlock Eeprom Chip so
will Flash the Bios Mod over It using the Sleep Bug !

Here You go :

http://rghost.net/7VwhvKpLl

let me know
Regards

Donate to me for my work and time . . . look into my Signature

P.S. Read the Instructions included !

[FirePhoneix]

Ok mate,
UMA = UMA means Unified Memory Architecture and the system performs the graphic function with Intel VGA only
Then Switching to other will enable nVidia but You have to know if your system is Muxed or Muxless !
Look here :

https://support.lenovo.com/it/it/documen...=Solutions

http://leshcatlabs.net/forums/viewtopic.php?t=62

Then about the NOVO Button is an EC issue so You can do in this way . . .

Xerivar

Hi BDMaster, thanks for the last info with the U disk.
I did not try it out so far but found a workaround for the "Novo" button not working problem:

- Install Grub boot manager
- Flash to 1.14, so you can use the sleep bug to flash a custom bios.
- Flash to unlocked 3.03 you provided using sleep bug as described in previous posts
- Use Fn + F12 key to get into boot menu and select the grub partition for booting (flashing did reset it for me to boot into windows immediately, might be different for others)
- In Grub, select the "system setup" option. This will make the laptop reboot with some kind of flag set, entering bios immediately after booting, thus eliminating the need for the Novo key
- you will then be able to do bios changes as usual

This allows me to use the modified 3.03 bios on Lenovo Y70-70 !
Only downside is I can not use the lenovo recovery feature from power off, just launch it using windows.
For me that's totally ok compared to fiddling with the hardware

Regards

P.S. If You will update to new Original version then You will need a new Bios Mod !

This sounds really like true pain, can i just reset everything to normal and try it later? i tried updating my bios normally but it says my bios version is same as the one i am trying to install from lenovo

[qian3303]

You have Downgrade to the version 1.14 to Unlock Eeprom Chip so
will Flash the Bios Mod over It using the Sleep Bug !

Here You go :

http://rghost.net/7VwhvKpLl

let me know
Regards

Donate to me for my work and time . . . look into my Signature

P.S. Read the Instructions included !

I set something wrong ,now is black ,but cpu and led , lan still work.
Please help me!!!!!!!!!!!

[FirePhoneix]

Appearently the bootloader you mentioned required linux i am afraid but i managed to get everything back, and going to share solution incase someone had same issue:
1-Put your laptop on sleep, then turn it off from the power button.
2-The nova button should work, you have to enable bios flashback from bios settings
3-Now download any old lenovo bios driver, install it, then download the latest one and install it.

Now everything should be back to normal.