[REQUEST] Sony Vaio SVE141 & SVE151 series (R0xx0D5) BIOS Unlock

[BDMaster]

Hello Sirs,

Please can you help me how to unlock all advance BIOS settings of my Sony Vaio SVE1512Y1E.

BIOS: Insyde H20 v3.7 R0180D5

Thank you in advance. Have a good day all.

regards,
Raymund

Hi friend,
It seems that this Bios is not moddable as Eeprom Write Protect error 28 (some tests done before), but We can try If do You want !
Use this tool run It as Admin and upload here the result file :

http://rghost.net/57069912

let me know
Regards

[mondcyte]

Hello Sirs,

Please can you help me how to unlock all advance BIOS settings of my Sony Vaio SVE1512Y1E.

BIOS: Insyde H20 v3.7 R0180D5

Thank you in advance. Have a good day all.

regards,
Raymund

Hi friend,
It seems that this Bios is not moddable as Eeprom Write Protect error 28 (some tests done before), but We can try If do You want !
Use this tool run It as Admin and upload here the result file :

http://rghost.net/57069912

let me know
Regards

Hello Sir,

I just did what you told, but it gives an error 7-zip: Unsupported method

I hope for your response.
Thanks,

your friend,
Raymund

[BDMaster]

Unpack that file and rename as mod then move into C.\ root !
Open a Comand Prompt with Admin Rights and run these comands :

cd C:\mod
GO.bat

It will produce a result.rar file and You'll find It inot folder mod or on Desktop,
then upload It here for me.
Let me know
Regards

[mondcyte]

Unpack that file and rename as mod then move into C.\ root !
Open a Comand Prompt with Admin Rights and run these comands :

cd C:\mod
GO.bat

It will produce a result.rar file and You'll find It inot folder mod or on Desktop,
then upload It here for me.
Let me know
Regards

Dear Sir,

please find the attached result.rar.

Please reply.

thank you very much.

---

Unpack that file and rename as mod then move into C.\ root !
Open a Comand Prompt with Admin Rights and run these comands :

cd C:\mod
GO.bat

It will produce a result.rar file and You'll find It inot folder mod or on Desktop,
then upload It here for me.
Let me know
Regards

Dear Sir,

please find the attached result.rar.

Please reply.

thank you very much.

I hope these files helps,

result.rar has 3.9 MB exceeding the minimim limit to upload.

---

Unpack that file and rename as mod then move into C.\ root !
Open a Comand Prompt with Admin Rights and run these comands :

cd C:\mod
GO.bat

It will produce a result.rar file and You'll find It inot folder mod or on Desktop,
then upload It here for me.
Let me know
Regards

Dear Sir,

please find the attached result.rar.

Please reply.

thank you very much.

---

Unpack that file and rename as mod then move into C.\ root !
Open a Comand Prompt with Admin Rights and run these comands :

cd C:\mod
GO.bat

It will produce a result.rar file and You'll find It inot folder mod or on Desktop,
then upload It here for me.
Let me know
Regards

Dear Sir,

please find the attached result.rar.

Please reply.

thank you very much.

I hope these files helps,

result.rar has 3.9 MB exceeding the minimim limit to upload.

Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
C:\Users\Royce\Desktop
architecture = x64_

Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012, Intel Corporation. All rights reserved.

Platform: Intel® HM76 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

--- Flash Image Information --
Signature: VALID
Number of Flash Components: 1
Component 1 - 8192KB (65536Kb)
Regions:
Descriptor - Base: 0x000000, Limit: 0x000FFF
BIOS - Base: 0x500000, Limit: 0x7FFFFF
ME - Base: 0x001000, Limit: 0x4FFFFF
GbE - Not present
PDR - Not present
Master Region Access:
CPU/BIOS - ID: 0x0000, Read: 0x0B, Write: 0x0A
ME - ID: 0x0000, Read: 0x0D, Write: 0x0C
GbE - ID: 0x0118, Read: 0x08, Write: 0x08

Total Accessable SPI Memory: 8192KB, Total Installed SPI Memory : 8192KB

FPT Operation Passed

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.


Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.

Intel ® Flash Programming Tool. Version: 1.0.2.1065
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.


Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.

[BDMaster]

Upload result.rar on RGhost or Sendspace Servers, Thanks.
Regards

[mondcyte]

Upload result.rar on RGhost or Sendspace Servers, Thanks.
Regards

please find the attached file "result.rar" for your perusal.
http://rghost.net/58339340

thank you very much BDMaster.

[BDMaster]

Upload result.rar on RGhost or Sendspace Servers, Thanks.
Regards

please find the attached file "result.rar" for your perusal.
http://rghost.net/58339340

thank you very much BDMaster.

Ok firned,
We have to try as your Eeprom is Write Protect = Error 28 !
Here your modifies :

Slic 2.1 Mod :

7E374E25-8E01-4FEE-87F2-390C23C606CD_1155.ROM Header RSA Key + Marker 2.1



SetupUtility Menu Tabs Unlock Mod :

FE3542FE-C1D3-4EF8-657C-8048606FF670_793.ROM Setuputility



Form Sets
--------------------------------------------------------------------------------
Offset: Title:
--------------------------------------------------------------------------------
0x61E54 Power (0x266)
0x64284 Advanced (0x2C)
0x6C064 Advanced (0x478)
0x7A904 Selects Zip Emulation as FDD or HDD (0x4F)
0x7B654 USB Configuration (0x36)
0x7BA74 128 MB (0x1B)
0x7BE14 RAID (0x7C)



0609 : 75 1D to EB 1D jnz short loc_180000628 to jmp short loc_180000628

0631 : 74 D8 to 74 00 jz short loc_18000060B to jz $+2

0638 : 74 D1 to 74 00 jz short loc_18000060B to jz $+2

064E : 74 BB to 74 00 jz short loc_18000060B to jz $+2


Here your Bios Mod follow instructions and flash from an USB Dos Formatted Bootable using comand flash.bat :

http://rghost.net/58340056

Disable SecureBoot and Set Legacy bios USB.

Let me know
Regards

[mondcyte]

Upload result.rar on RGhost or Sendspace Servers, Thanks.
Regards

please find the attached file "result.rar" for your perusal.
http://rghost.net/58339340

thank you very much BDMaster.

Ok firned,
We have to try as your Eeprom is Write Protect = Error 28 !
Here your modifies :

Slic 2.1 Mod :

7E374E25-8E01-4FEE-87F2-390C23C606CD_1155.ROM Header RSA Key + Marker 2.1



SetupUtility Menu Tabs Unlock Mod :

FE3542FE-C1D3-4EF8-657C-8048606FF670_793.ROM Setuputility



Form Sets
--------------------------------------------------------------------------------
Offset: Title:
--------------------------------------------------------------------------------
0x61E54 Power (0x266)
0x64284 Advanced (0x2C)
0x6C064 Advanced (0x478)
0x7A904 Selects Zip Emulation as FDD or HDD (0x4F)
0x7B654 USB Configuration (0x36)
0x7BA74 128 MB (0x1B)
0x7BE14 RAID (0x7C)



0609 : 75 1D to EB 1D jnz short loc_180000628 to jmp short loc_180000628

0631 : 74 D8 to 74 00 jz short loc_18000060B to jz $+2

0638 : 74 D1 to 74 00 jz short loc_18000060B to jz $+2

064E : 74 BB to 74 00 jz short loc_18000060B to jz $+2


Here your Bios Mod follow instructions and flash from an USB Dos Formatted Bootable using comand flash.bat :

http://rghost.net/58340056

Disable SecureBoot and Set Legacy bios USB.

Let me know
Regards

Hello Sir BDMaster,

I was able to boot from DOS, performed a flash.bat. I got this results.

http://rghost.net/58342803

thanx,

best regards,
raymund

[BDMaster]

And so have you pressed any key to continue flashing as prr.exe can bypass the error 28 (not always) ?
Let me know
If cannot flash Bios Mod then only an SPI Programmer can do !
Regards

[mondcyte]

And so have you pressed any key to continue flashing as prr.exe can bypass the error 28 (not always) ?
Let me know
If cannot flash Bios Mod then only an SPI Programmer can do !
Regards

Dear Sir,

Yes, I pressed again but it gave me the same result. As prr.exe was already executed.

Please don't stop helping me. I really need to pursue this case. I am willing to pay
just to finish this, because I would use this when I get back to Germany. I have no choice.

Thank you Sir and best regards,
Raymund