gigabyte ga-945gcm-s2c clock ratio 6x locked

[00seven7]

Good evening

I'm having problems with this Gigabyte GA-945GCM-S2C motherboard. I have 3 motherboards with the same problem. The clock ratio doesn't save in the original BIOS. I updated to the F6D version and it always stays at 6x. I tested it with the Core2 Duo E7500 and the Pentium Dual Core E5400 processors but there's no solution. I change it to 11x in the BIOS and save it and when I quit it goes back to 6x.
Any BIOS modifications with the unlocked clock ratio?

[DeathBringer]

Go to BIOS and do Load Defaults, save and reboot.
Make a screenshot of ThrottleStop with running TS Bench.

[00seven7]

Good Afternoon

Thank you for your support
See the photos of the test below. I tried to set the multiplier to 11x in the program but it doesn't change. It doesn't even change to 7x. It's as if the BIOS had locked it.

[00seven7]

I got it. I disabled the BD Prochot option and now it unlocked the multiplier. But every time I restart the PC it goes back to being locked 6x. Is there an option in the bios? Will I have to open this program every time?

[DeathBringer]

I disabled the BD Prochot option and now it unlocked the multiplier.

So it's hardware problem.

[00seven7]

It could possibly be a hardware problem, as I have the same problem on all 3 cards. batch of bad boards. But with your help I can now use it at full speed. thank you very much.