[h/w limitation] Please enable AHCI for MSI G41M-P28

[Mickey]

http://www.msi.com/product/mb/G41M-P28.html#/?div=BIOS
http://www.msi.com/service/download/bios-17439.html

http://download1.msi.com/files/downloads...592vQ8.zip

Thanks.

[camiloml]

Now RAID mode should let you select AHCI too.

[worryworth]

File download is only 26k instead of 687.38kb. Doesn't seem to be a valid archive. I too would appreciate AHCI support on this board. Thank you for your work, shows that there's hope.

[joellim]

hi camiloml,

i tried to download the file you put up too but it is only an empty zip folder with the size of 26kb. can you kindly fix the link? I too would like to have AHCI and NCQ enabled on this mobo.

thanks in advance!

[camiloml]

I see, i will reupload it from home

[Osaka_23]

I see, i will reupload it from home

Thanks for the file! How do I install it on to the BIOS?

[camiloml]

15 downloads and no one comes to say if it works or not? Did you all brick your system or simply are ungratefull ppl???

[Oleg]

Hello,camiloml.
I downloaded your modified BIOS for MSI G41M-P28 and recorded it before making a change in the registry HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ services \ msahci. The value of Start "= dword: 00000003 I changed to 00000000, which would enable driver Msahci.sys. In the BIOS setup in paragraphs Integrated Periferials - On-Chip ATA Devices - Raid mode I switched mode AHCI. Then rebooted 2 times. In the Device Manager in the section IDE ATA / ATAPI controllers AHCI Controller has not appeared. Thus AHCI in the BIOS item appears, but it really does not work.
Excuse me for my English. Translated using Google Translate.

[joapetis]

I tried to flash the bios. In the raid mode not have the option to select ahci.

[d1mAs1q]

AHCI don't work...