(03-20-2016, 03:04 PM)LosSantosPro Wrote: [ -> ]Hi, that seemed to fix for me and other users, try setting your BIOS to default then try again
Thx
I messed around with this for a while trying all sorts of stuff. Now, it seems to be working. The thing that seemed to make it stick was to make sure I was on the Exit tab when I set the brightness with the Fn-Up keys.
Thanks again for the bios and the quick support.
(03-20-2016, 03:04 PM)LosSantosPro Wrote: [ -> ]Hi, that seemed to fix for me and other users, try setting your BIOS to default then try again
Thx
Hello, friend, your BIOS mod is best, i installed it today. Initially, there were problems can not boot, I did not know what happened, a very long time and was upset 20 reboots the system, until I realized that it is loaded in the video. I have included tolok download intel 4000 and now once booted the system, of course it's a little strange, but everything else worked, and here I am with a new BIOS, and very satisfied.
Thank you very much LosSantosPro for modded BIOS!
I had to wait few hours for download last stable version of your excellent work but it was worth!
Now, I can change Wireless Card to another one and now I can install MacOS on Lenovo Z580!
Glory for Lord for you and your work
Hello
I can not run a USB flash drive, I tried: rufus-2.8; MultiBootISOs-v0.2. Please brief instructions.
Does it work on Windows 10 - 64bit?
BDMaster Wrote:
If You consider to flash the Bios Mod by LosSantosPro You have to use DOS Pure env.
So prepare an USB Stick Fat32 formatted (Use RUFUS Tool) and then copy into
all files from Bios Mod folder, the Disable Secure Boot and Set Leagcy Bios USB
then Boot form USB Stick and execute Flash.bat !
That's all !
Regards
And you can't flash within Windows but if your asking if the BIOS is compatible with Win 10 then yes it is, the BIOS is compatible with all OS'
(04-16-2016, 05:24 PM)gospel97 Wrote: [ -> ]What am I here to write in
My USB disk after RUFUS Tool is F:
Where it says C:/ - type flash.bat
Hello
LosSantosPro
Thank you very much, everything works, I had a problem with the entry: C: / - type flash.bat does not work. I typed F: \> fpt.exe -f bios.bin -bios and bios is activated.
I have another question, how to change the numbers SN and the UUID?
I made a donation for the dangerous work.
(04-17-2016, 02:37 PM)gospel97 Wrote: [ -> ]Hello LosSantosPro
Thank you very much, everything works, I had a problem with the entry: C: / - type flash.bat does not work. I typed F: \> fpt.exe -f bios.bin -bios and bios is activated.
I have another question, how to change the numbers SN and the UUID?
I made a donation for the dangerous work.
Thank you for donation! :-)
And for the SN and UUID - I can create a custom bios.bin with your desired SN and UUID - bare in mind UUID is in Hex format
Thanks
I have two numbers, but I do not know how to do it.