Absolutely yes
![Smile Smile](https://www.bios-mods.com/forum/images/smilies/smile.gif)
The trip was excellent. Denmark is great and funny place.
Good food good tobacco for rolling cigarettes, Funny Xmas Markets and Tivoli with Mulled wine and Tuborg beeer
Back on my PC,
Yesterday I checked hardware, there was the hardware problem with Xeon sticker modifier and pins in the socket,
all repaired. Now it starts without any sound nor stops.
I was switching between this two Xeons E5450 3.0 FSB 1333 + X5482 3.2 FSB 1600, and...
suddenly BIOS said it is corrupted and loaded the backup from second chip.
It has ended with uploading modified BIOS F10 with a higher voltage to the memory controller: 1.600V
and OROM rel 8.
[censored].
[censored].
[censored] which was imserted by seller/refurbisher of the MB.
During switching Xeons I made the system on X5482 up with 1600 FSB but seems it is not in processor table as I had seen it was recognised
with multiplier 6 and 333 base frequency, so it was 2.0 MHZ when I adjusted to 8 and 400 it started again, but seems was very much overheating, with up to 95 Deg C just during BIOS adjustment, both were refusing going up from 1333 memory frequency, but on any of base memory frequency up to 400 with 3.2 multiplier, when I went higher the Bios was brought back to fail safe with 3.0 Xeon but with 3.2 X5482 refused to start.
So I had to put back 3.0 and restart process of testing.
Now I am on 3.0 with 1333 mem frequency on 1.600V.
Have completely no Idea what can I do more except upgrading OROM.
actual F10 bios attached.
10_RESET.zip (Size: 544.62 KB / Downloads: 1)