[REQUEST] Lenovo G510 (79CNxxWW) Whitelist Removal

[jefediego]

Here You go :

http://rghost.net/7MP42RV6l

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C, put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

let me know
Regards

Donate to me for my work and time . . . look into my Signature

Give me this error

Error 284: Fail to load driver (PCI access for Windows).
Tool needs to run with an administrator priviledge account.

EDIT: Have do a reboot, enabled the option for downgrade bios and then do it this again, now i get this



Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 6656KB of 6656KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Failed to erase this block 3 times!!

[BDMaster]

Ok try to flash for Pure DOS using an USB Stick !
Follow this Guide :

Update from pure DOS with USB-bootable stick
See how to make one here:
http://www.howtogeek.com/136987/how-to-c...usb-drive/

https://app.box.com/s/w8xgrhpwf2nx0kamfkc0

http://rufus.akeo.ie/?locale=en_US

Copy the "Modified" folder contents into the stick and boot in DOS mode and
Run Flash.bat to update.

Don't touch Video Settings or Disable Video Card It will Brick laptop !!!

Please post results.
This mod for your PC only!!!


If You get Errors yet then Downgrade to previous version 38 . . . here You go :

http://rghost.net/8RMSwmlqD

Then redo results files and upload them here !

Let me know
Regards

[jefediego]

Ok try to flash for Pure DOS using an USB Stick !
Follow this Guide :

Update from pure DOS with USB-bootable stick
See how to make one here:
http://www.howtogeek.com/136987/how-to-c...usb-drive/

https://app.box.com/s/w8xgrhpwf2nx0kamfkc0

http://rufus.akeo.ie/?locale=en_US

Copy the "Modified" folder contents into the stick and boot in DOS mode and
Run Flash.bat to update.

Don't touch Video Settings or Disable Video Card It will Brick laptop !!!

Please post results.
This mod for your PC only!!!


If You get Errors yet then Downgrade to previous version 38 . . . here You go :

http://rghost.net/8RMSwmlqD

Then redo results files and upload them here !

Let me know
Regards

Hello friend, booted from DOS USB and give error something like error to write or something like that, so now I have to downgrade and post the same things like I do before? the back up bios? or what I have to do after doing the downgrade...?
Thanks

EDIT: We have a major problem, have downgraded but the boot mode has changed to EFI, and it says no boot media connected all the time, the problem is that I can't get to the bios setup, what I have to do friend?

[jefediego]

Got any ideas? I'm using now another pc...

[BDMaster]

Hi mate,
Can You please make some Screenshots to see what get into Menu Tabs now ?
Please upload here so i can give a look as for me is very strange this !
We can revert the process if the Eeprom Chip is Unlocked now !
Can You Boot normaly to Windows ?
Let me know
Regards

[jefediego]

Hi mate,
Can You please make some Screenshots to see what get into Menu Tabs now ?
Please upload here so i can give a look as for me is very strange this !
We can revert the process if the Eeprom Chip is Unlocked now !
Can You Boot normaly to Windows ?
Let me know
Regards

Nevermind I solved it, what I have to do now? Remember that I have downgraded

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/6ZV8PlTYX

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

[jefediego]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/6ZV8PlTYX

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

Here is it

https://www.sendspace.com/filegroup/5xkk...9yN84t1zRg

[BDMaster]

Hi mate,
Like before only using Sleep Bug as error 280 present again !
Here You go :

http://rghost.net/7YK67qnBC

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

[jefediego]

Hi mate,
Like before only using Sleep Bug as error 280 present again !
Here You go :

http://rghost.net/7YK67qnBC

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C, put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards

Hello mate, merry christmas.
I got this


Intel ® Flash Programming Tool. Version:  9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

   --- Flash Devices Found ---
   W25Q64BV    ID:0xEF4017    Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 6656KB of 6656KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target flash area!
Failed to erase this block 3 times!!