![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
09-25-2022, 05:03 AM
Hi, sorry for my english, I am using translation.
Here is my story.
I bought myself a Lenovo Legion T5 26IOB6 system unit. Honestly, I did not know that I would have problems installing RAM. I bought G.SKILL TRIDENT Z RGB 32GB (2x16GB kit) 3600MHz CL16 RAM, installed it, and it runs at only 2133 MHz. I updated the bios from the official Lenovo website. In the BIOS, it became possible to select certain memory profiles - GEAR1, GEAR2. But the RAM did not react when choosing these profiles. After reading the forums, I found out that RAM can operate at a frequency of 3200 MHz with a maximum voltage of 1.2 volts according to JADEC standards.
There was a task to modify the BIOS so that it was possible to select the XMP profile in the BIOS. I have radio engineering friends. Soldered two flash drives with bios. One is 8 megabytes, the other is 16 megabytes. We made dumps using the programmer. I then downloaded the AMIBCP program and edited the 16MB dump to include the XMP profile.
We loaded the edited BIOS back onto the USB flash drive and started the computer. On startup, the screen will display "Can not find or load Rom image!! System will shut down after 5s...".
I'm looking for help on unlocking hidden bios partitions (in particular, unlocking a memory partition to be able to select an XMP profile, and if possible, unlocking all partitions) and disabling Flockdn protection for further flashing without a programmer.
Bios dumps are attached.
Thank you for your help.
Machine Type: 90RT
Bios Version: O54KT1DA
https://mega.nz/file/w0dUUY4I#l6rxL7HbJu...V6q34AZyB0
https://mega.nz/file/k1MkHRwD#J7S3dkQ_LD...sdwLVryP9c
Here is my story.
I bought myself a Lenovo Legion T5 26IOB6 system unit. Honestly, I did not know that I would have problems installing RAM. I bought G.SKILL TRIDENT Z RGB 32GB (2x16GB kit) 3600MHz CL16 RAM, installed it, and it runs at only 2133 MHz. I updated the bios from the official Lenovo website. In the BIOS, it became possible to select certain memory profiles - GEAR1, GEAR2. But the RAM did not react when choosing these profiles. After reading the forums, I found out that RAM can operate at a frequency of 3200 MHz with a maximum voltage of 1.2 volts according to JADEC standards.
There was a task to modify the BIOS so that it was possible to select the XMP profile in the BIOS. I have radio engineering friends. Soldered two flash drives with bios. One is 8 megabytes, the other is 16 megabytes. We made dumps using the programmer. I then downloaded the AMIBCP program and edited the 16MB dump to include the XMP profile.
We loaded the edited BIOS back onto the USB flash drive and started the computer. On startup, the screen will display "Can not find or load Rom image!! System will shut down after 5s...".
I'm looking for help on unlocking hidden bios partitions (in particular, unlocking a memory partition to be able to select an XMP profile, and if possible, unlocking all partitions) and disabling Flockdn protection for further flashing without a programmer.
Bios dumps are attached.
Thank you for your help.
Machine Type: 90RT
Bios Version: O54KT1DA
https://mega.nz/file/w0dUUY4I#l6rxL7HbJu...V6q34AZyB0
https://mega.nz/file/k1MkHRwD#J7S3dkQ_LD...sdwLVryP9c
![[Valid RSS]](valid-rss.png "Validate my RSS feed")