[REQ]Microcode for RF511

[qwerty01]

Hi. I have Samsung RF511 with 2630QM. I want install 3th generation core so i check my bios and I have only 206A7,206A6,206A3,206A5,206A2,
206A1 microcode. Can somebody add 206A9?
Bios 17HX: https://file.io/mM63WxHjoRg2

[DeathBringer]

Adding microcode will not add support for new CPU.
BTW: mobile CPUs with Ivy Brigde core have CPUID=0x306A9, not 0x206A9

[qwerty01]

Yes, Ivy bridge have 0x306A9. Laptop have HM65. Now have 2630QM, but some cases it's to slow.

[DeathBringer]

There is no way to add support of Ivy Brigde to this BIOS.

[qwerty01]

Even 3610QE: https://www.bios-mods.com/forum/Thread-T...Ivy-Bridge ?

[DeathBringer]

No way.

[qwerty01]

Ok, I will buy 2860QM.

[DeathBringer]

Read this - https://www.bios-mods.com/forum/Thread-R...ight=RF511
Before you buy a quad core processor...

[qwerty01]

Thanks. My laptop came factory with 2630QM (TDP 45W) and everything works. I'm just wondering whether it makes sense to buy 2860QM. Maybe better is 2820QM. Cooling on the current 2630QM is sufficient (there is no throttling - but it is 90 degrees C), and it is very small:
https://ae01.alicdn.com/kf/Sfbbebbf4f547...92b6cK.jpg
It's cooling CPU and GT 540M.