ASUS Rampage III Formula Request

[eshield]

I did find one snag. The integrated Intel NIC doesn't work. Is there any way to have it added back in? I didn't notice this until later on since I'm also utilizing an add-in NIC. Thanks.

The fastest way to make sure it's a bios mod fault or not is to flash original one. Everything I did in mod have no relation with built-in NIC.

It's strongly recommended to clear cmos (or load bios defaults) after each bios update. Even if you flashed the same bios for 2nd time in a row.

P.S: While using Win8 I had a strange bug: once my built-in NIC has totally disappeared from device manager. I performed a lot of action (lots of reboot and driver related actions) and everything was useless until I plugged in PCI NIC. In magical way my built-in NIC appeared after 2nd reboot. BB Win8 till November.

[CrimsonKnight13]

Thanks. I'll see what happens.

[CrimsonKnight13]

Loading defaults didn't fix the missing NIC option. It appears that the integrated NIC isn't being turned on within the BIOS.

[eshield]

Flash original BIOS and check if NIC is working ...

[CrimsonKnight13]

Will do. This is the first time I've seen this happen.

[CrimsonKnight13]

I can confirm that going back to 0801 & then back up to the modded 901 restored the integrated NIC.

It's completely stable even when overclocked. Thanks for the hard work!

[Klax109763]

Just wanted to thank you Eshield.

Put the OROM in using ASUS EZ-Flash with no problems.

No problems with the NIC either after updating.

I did freak out a little when the BIOS posted a message about updating the Sata Controller firmware during the boot.

DO NOT TURN OFF / REBOOT

etc..

Something like that...

I've never seen anything like that in all my years with a PC and it didnt happen when I used an earlier 903 OROM here from another poster. That mod also worked perfectly and was very-much appreciated. Seemed to help a lot with stability of the 6G controller.

So I waited and I did indeed get a BIOS message the that firmware had been updated successfully.

It'd be nice if ASUS supported their boards after 6 months but, as we all know, that is wishful thinking.

Thanks so much for the mod friend. It's sincerely appreciated.

I do use the 6G controller for my boot drive so anything to improve stability is very welcome.

Everything seems to be working great so far.

[Idonno]

Well I know it's been awhile since the last post was made but I just have to tell you just how great your mod was.

I use the two Marvell ports for my optical drives since I have all the Intel Sata II ports filled.

I was having allot of stability issues with my burners on the Marvell ports until I installed your mod now everything works great!

I have even picked up some speed on my two Intel raid arrays and I am having no issues with anything else what so ever.

I couldn't be happier with your mod THX.

[TiKiMaN1]

Just updated my BIOS to this modded version and my OS and hard drives are working much better. Thank you very much!

[Will2300]

CrimsonKnight13
What exactly do you want to "unlock" in BIOS? I don't get it

I've modded as you requested the very latest available BIOS 0903.

Change list:
-Updated Intel RST to 11.5.0.1582
-Updated Marvell 9128 BIOS\Firmware\Bootloader to 1.0.0.1033\2.2.0.1125\1.0.1.0002b
-Updated JMicron JMB363 to 1.07.28
-Inserted ASUS SLIC 2.1
-Removed all languages except English


I do not have R3F myself, so I can't test this mod .. but I'm pretty sure that it will work.

Use it on your own risk.

P.S: Thanks ZioGTS for the latest Marvell firmware compilation.

This forum has been so helpful. Thanks for the collaboration of everyone out there modding BIOSes. I have a Rampage III Formula and this BIOS helped me a lot. Seeing that this thread was getting old and stagnant. I decided to work off of what "eshield" had done and modify his BIOS ROM to include the latest Intel RST 12.7.0.1936 and Intel 82567V-2 Gigabit Network: v1.5.13 OROMS. So without further ado I present version 1.1 of BIOS v0903 for ASUS Rampage III Formula

Complete changelog:

Intel ICH10R SATA RAID Controller: v12.7.0.1936
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*
JMicron JMB36X Controller: v1.07.28
Intel 82567V-2 Gigabit Network: v1.5.13
SLIC 2.1

I have tested the ROM and everything works without a hitch.

BUT Use at your own risk!

Thanks guys!

  R3F - 0903NEW.zip (Size: 827.3 KB / Downloads: 100)