(11-29-2014, 09:08 AM)200krisx Wrote: (11-28-2014, 02:22 PM)BDMaster Wrote: (11-28-2014, 01:17 PM)200krisx Wrote: My result file is here: http://rghost.net/59317329, hope someone can help me! Thanks Kris
Here You go :
http://rghost.net/59318570
Let me know
Regards
P.S. if You appreciate my work and want I continue Donate to me . . .
http://goo.gl/EzxWhW
Thanks for the mod BDMaster, but I think something went wrong although flashing process finished, now the laptop is acting strange. The power LED illuminates on the button, and the fan is on full speed and I dont get any display and seems to hang. Please tell me theres a way I can salvage this laptop as I have a lot of programs for my engineering degree I'm currently studying for and I can't afford a new laptop let alone new licences for the software :'( I'm kind of having a panic attack right now so not thinking straight. I appreciate your help BDMaster, I'm not blaiming you before you think that I am
Thanks,
Kris
Yes my friend, something is gone wrong as 1st time is happened this !
I have modded tons of Bioses Acer, Lenovo, Sony, HP, etc. belive me !!!
Your data are not lost as They are on HD and Laptop will reborn reflashing
newly a Bios into Eeprom, now We have to find a way to . . .
Try to reset CMOS removing battery on MoBo or using the jumper then
there is a tool here :
http://boginjr.com/it/sw/dev/de-cmos3/
I hope You can Boot from USB Dos mode yet to reflash original !
Try to connect an external monitor on VGA and look for display !
I think Bios is gone corrupt, but Lenovo not has a Recovery way . . .
Here is your Original Bios Backup for FPT :
http://rghost.net/59330218
let me know
Regards
P.S. look here for SPI PGM :
https://www.bios-mods.com/forum/Thread-R...5#pid74575
I will try to find further infos for Recovery Bios Lenovo :
https://forums.lenovo.com/t5/IdeaPad-S-s...d-p/332989
http://forums.lenovo.com/t5/IdeaPad-Y-U-...d-p/377911
1.Download Phoenix Wincrisis on another computer, then Click on WINCRIS.exe and choose
CREATE MINIDOS CRISIS DISK and press START to make: USB floppy or USB flash memory.
When creating, select from Folder Options to view the hidden and system files and delete or
rename the file config.sys if present. Read also the included instructions.
2.Rename your BIOS file (65CN99WW.cap?) to bios.wph and copy it to the USB stick.
3.Plug the USB stick into the laptop and shutdown.
4.Hold down the keys Fn+R, and while holding press the power button.
5.Now you should hear the floppy drive working or USB blinking. Hold the keys for a while.
6.Leave the computer for few minutes. If it does not restart itself, turn the power off.
7.if everything went OK the computer should start normally.
Note: Do not take off your battery before flashing. It seems that it will verify AC/DC
connection and battery level and stop if one is not OK.
I have to extrat your Bios.cap to upload here yet ! so We can try It !
Regards