Asus Rampage III Extreme 1601 sindersMod! (TRIM in RAID0 support for R3E)

[Gawlron]

Thanks Sniders. I look forward to farting around with this.

[djstx2003]

mr. Sinders can we update all rom modules in official firmware? I successfully updated these in official 1502:
Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1033*
Marvell 91xx SATA 6G Controller - Firmware: v2.2.0.1125*
Marvell 91xx SATA 6G Controller - Bootloader: v1.0.1.0002b*

but I don't know how to update the others:
Intel® ICH10R SATA RAID Controller: v11.5.0.1582
JMicron JMB36X Controller: v1.07.28
Intel® 82567V-2 Gigabit Network: v1.3.95

especially for this: JMicron JMB36X Controller: v1.07.28
I found the flash loader jmb36x_flash_1.21 but I don't know what command to
write when I'm booting into dos.
the command line is something like this: 36xupd /w 20_197B-2363_v1.07.28.bin

can u help me to update it? and this and the other 2.
the reaon I want to do this its because in your modded bios when I use it
I loose my Microsoft office 2010 activation.
when I load the official bios activation is ok.
please help me my friend.
thank u!!!

---

also with your modded bios I see in safely remove hardware the Marvell 91xx config.
I installed all the drivers but this stays there. is there a working solution for this?

thank u!!!

[ZioGTS]

You shouldn't post an identical request in all the modder's threads... :|

[djstx2003]

You shouldn't post an identical request in all the modder's threads... :|

sorry my friend but these 2 bios has the same problem for me.

[ZioGTS]

Maybe because your problems are probably not related to bios?

[djstx2003]

Maybe because your problems are probably not related to bios?

i'm sure its related with these 2 bios. with official bios 1502 I don't have any of these problems. i'm waiting for your special 1502 bios you promised to me to test it and tell you the results. thank u. be well.

[sinders]

If the problem exists with both mine and ZioGTS modded bios but not with the official bios, then there must be some rom
upgrade or etc in our release that your Microsoft office 2010 activation don't like because it might see it as a hardware
change and therefore make you lose activation.

If the special bios ZioGTS is making for you does the same thing, then I would stay with the official bios.

[djstx2003]

If the problem exists with both mine and ZioGTS modded bios but not with the official bios, then there must be some rom
upgrade or etc in our release that your Microsoft office 2010 activation don't like because it might see it as a hardware
change and therefore make you lose activation.

If the special bios ZioGTS is making for you does the same thing, then I would stay with the official bios.

no mr.Sinders also in official bios I have this problem. its not something wrong in your mods. I hope mr. ZioGTS makes for me a modded 1502 bios that I have no problem with it and that it will have all the updated roms inside.
I think the beta bios 1601 has some problem and changes the device id so office 2010 looses the activation.
i'll be waiting for a modded 1502 bios updated. I think a lot of users will want this.
be well, thank u!!!
Spiros.

[sinders]

My modded Rampage III Extreme 1601 BIOS - 2013-06-18

1. Intel® ICH10R SATA RAID Controller: v12.7.0.1936
2. JMicron JMB36X Controller: v1.07.28
3. Marvell 91xx SATA 6G Controller: (BIOS) v1.0.0.1033 / (FW) v2.2.0.1125
4. Intel® 82567V-2 Gigabit Network: v1.4.10

Download link:
sindersMod_1601_2013-06-18

[DarkFox]

Thank you Sinders!
Your BIOS version is any different from the version Bios ZioGTS?