ZioGTS, you might like to know that I re-flashed your s11 bios and then installed Windows on two new Samsung 840 Pro's in raid0 and after a few days I have noticed that the shutdown command now works properly. Not sure if it was the re-flash of bios or re-installing of windows that fixed it though as I did both at the same time.
System is super fast and smooth... I see no reason to spend any more money on another computer build until at least SATA Express or much lower energy consumption. Thanks again bud...
By the way, there are new IRST WHQL drivers available version 12.8.2.1000.
Information:
Driver Date: 8-28-2013
Version: 12.8.2.1000
Application version: 12.8.2.1000
New:
Microsoft WHQL Certification.
Update Serial ATA AHCI driver version 12.8.2.1000.
Update Serial ATA RAID driver version 12.8.2.1000.
Support for Windows 8.1 and Windows Server 2012 R2 operating systems.
Improved compatibility SSHD (Solid State Hybrid Drive) with the function Smart Connect Technology. Fixed many problems.
OS supported:
Microsoft Windows 7
Microsoft Windows 7 x64 Edition
Microsoft Windows 8
Microsoft Windows 8 x64 Edition
Microsoft-Windows Server 2008
Microsoft Windows Server 2008 x64 Edition
Microsoft Windows Server 2008 R2 x64
Supported Chipsets:
PCI \ VEN_8086 & DEV_3B29 & CC_0106.DeviceDesc = "Intel ® 5 Series 4 Port SATA AHCI Controller"
PCI \ VEN_8086 & DEV_3B2F & CC_0106.DeviceDesc = "Intel ® 5 Series 6 Port SATA AHCI Controller"
PCI \ VEN_8086 & DEV_3B22 & CC_0106.DeviceDesc = "Intel ® 5 Series/3400 Series SATA AHCI Controller"
PCI \ VEN_8086 & DEV_1C02 & CC_0106.DeviceDesc = "Intel ® Desktop / Workstation / Server Express Chipset SATA AHCI Controller"
PCI \ VEN_8086 & DEV_1C03 & CC_0106.DeviceDesc = "Intel ® Mobile Express Chipset SATA AHCI Controller"
PCI \ VEN_8086 & DEV_1D02 & CC_0106.DeviceDesc = "Intel ® C600 Series Chipset SATA AHCI Controller"
PCI \ VEN_8086 & DEV_1E02 & CC_0106.DeviceDesc = "Intel ® 7 Series/C216 Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_1E03 & CC_0106.DeviceDesc = "Intel ® 7 Series Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_8C02 & CC_0106.DeviceDesc = "Intel ® 8 Series/C220 Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_8C03 & CC_0106.DeviceDesc = "Intel ® 8 Series Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_9C02 & CC_0106.DeviceDesc = "Intel ® 8 Series/C220 Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_9C03 & CC_0106.DeviceDesc = "Intel ® 8 Series Chipset Family SATA AHCI Controller"
PCI \ VEN_8086 & DEV_2822 & CC_0104.DeviceDesc = "Intel ® Desktop / Workstation / Server Express Chipset SATA RAID Controller"
PCI \ VEN_8086 & DEV_282A & CC_0104.DeviceDesc = "Intel ® Mobile Express Chipset SATA RAID Controller
Download at Station Drivers or below. Seem to be working good for me so far.
http://www.mediafire.com/download/slcelp...2.1000.exe