Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Asus P8Z68-V PRO/GEN3 BIOS 3703 with all OROMS/LAN/VGA updated
#51
(07-26-2019, 10:09 AM)Markosgo Wrote: By the way Rayman, that new bios that is published is newer than the one you passed me by private, is it better?

No, It's the same. I just integrated the EFI drivers, but they don't work. PC boots up normally in EFI Compatible ROM mode without any EFI drivers (like in original BIOS), when I pulling out my GTX 1080 Ti. With GTX 1080 Ti I see BIOS logo (or black screen, if logo is disabled), than PC do an error beep every 30 sec.

My GTX 1080 Ti have the latest UEFI GOP driver (3000E), but PC still won't boot in EFI Compatible ROM mode.

Intel Core i7-2600K + Corsair H105 + 2x Noctua NF-P12 PWM
ASUS P8Z68-V PRO/GEN3
16Gb (4x4Gb) G.SKILL Ripjaws X
ASUS ROG STRIX GTX 1080 Ti GAMING OC
128Gb Plextor M5 Pro + 1.5Tb Western Digital Caviar Black + 2x 4Tb Western Digital Caviar Black
Corsair Graphite Series 600TWM + Noctua NF-P12 PWM + Noctua NF-A20 PWM + 850W Seasonic X850 Gold
find
quote
#52
From what I saw, in the previous capture of the integrated drivers that the bios has, it only carries the Intel onboard gop drivers...

With it it works correctly if it is started in compatible Efi, if it is selected in the configuration of the graphic onboards or by car with the graphic disconnected from the Pcie.

Then it makes me understand that this bios does work with the integrated one and carries the necessary gop for the intel...
Would it be possible, that it was necessary to have an exclusive gop driver integrated for both Nvidia and AMD?

Perhaps this is what is failing when trying to boot the system, since it does not have a driver for Nvidia/Amd and it changes if it does for Intel.
find
quote
#53
Good evening, I'm Victor (write you from Portugal), currently I'm the happier owner of one Asus P8Z68-V LX, but for my bad luck I cannot boot with my new M.2 previously connected to an PCIe adapter. I'm able to use the M.2 for storage, also I'm able to install the SO in the M.2 but not to boot it.

Do you know where I can find the need it firmware to update the Bios to fix this issue?

Thank you in advance.
find
quote
#54
(07-26-2019, 07:03 PM)RaYM Wrote: My GTX 1080 Ti have the latest UEFI GOP driver (3000E), but PC still won't boot in EFI Compatible ROM mode.

But a card without a GOP header will boot.  Thanks ASUS!

ASUS P8Z68-V PRO/GEN3
Intel Core i5-2500K OC @ 4.6Ghz
16GB 2133Mhz DDR3 (4x4GB) G.SKILL Ripjaws Z
EVGA GeForce GTX 1080 SC GAMING ACX 3.0
Sound Blaster Z PCIe -> SPDIF DTS -> MidiLand S4 8200 v2.0 Receiver
240GB OCZ Vertex 3 SATA III MLC + 2x 2TB Seagate Constellation (RAID 1)
Noctua NH-U12P SE2 120mm Push-Pull CPU Cooler
SeaSonic M12II Bronze 620W ATX12V V2.3

find
quote
#55
Why is the graphics (and all PCIe) system listing as PCIe 2.0 instead of 3.0 ???

Both GPUz and HWINFO64 display this. Chipset driver error? I'm on 10.1.1.45

ASUS P8Z68-V PRO/GEN3
Intel Core i5-2500K OC @ 4.6Ghz
16GB 2133Mhz DDR3 (4x4GB) G.SKILL Ripjaws Z
EVGA GeForce GTX 1080 SC GAMING ACX 3.0
Sound Blaster Z PCIe -> SPDIF DTS -> MidiLand S4 8200 v2.0 Receiver
240GB OCZ Vertex 3 SATA III MLC + 2x 2TB Seagate Constellation (RAID 1)
Noctua NH-U12P SE2 120mm Push-Pull CPU Cooler
SeaSonic M12II Bronze 620W ATX12V V2.3

find
quote
#56
(08-07-2019, 07:53 PM)Cyberia Wrote: Why is the graphics (and all PCIe) system listing as PCIe 2.0 instead of 3.0  ???

Both GPUz and HWINFO64 display this.  Chipset driver error?  I'm on 10.1.1.45

Its PCIe 2.0 because you are using Sandy Bridge CPU, you need Ivy Bridge CPU to get PCIe 3.0

Btw I too need a modded BIOS for Asus P8Z68 pro v/gen3, for EFI compatible ROM, i used it from previous posts here, got Black Screen WITH GPU power on I have MSI Armor OC 8GB, but when i turned it off and use the integrated graphics it worked... so maybe we need to modify the BIOS on the GPU instead of the MB...
I`m no expert of modding, ts just an idea...
find
quote
#57
(08-08-2019, 04:39 PM)RKOpunk Wrote: Its PCIe 2.0 because you are using Sandy Bridge CPU, you need Ivy Bridge CPU to get PCIe 3.0

Thanks, didn't know that.

Glad you liked the EFI version, even though it doesn't work.  I wish I had also asked RaYMaN for the EFI UNDI LAN driver just for completeness sake, but I felt guilty asking for more and he's done so much already.

I suspect the reason the internal iGPU works with EFI BOOT enabled is because ASUS specifically tested that functionality and NOT discrete graphics cards.  Pretty sure it's a main bios bug.  I've updated my GPU bios AND installed the newest GOP header on my card, with GOPUpd + NVFlash, and it doesn't help this issue....doesn't hurt it either.

ASUS P8Z68-V PRO/GEN3
Intel Core i5-2500K OC @ 4.6Ghz
16GB 2133Mhz DDR3 (4x4GB) G.SKILL Ripjaws Z
EVGA GeForce GTX 1080 SC GAMING ACX 3.0
Sound Blaster Z PCIe -> SPDIF DTS -> MidiLand S4 8200 v2.0 Receiver
240GB OCZ Vertex 3 SATA III MLC + 2x 2TB Seagate Constellation (RAID 1)
Noctua NH-U12P SE2 120mm Push-Pull CPU Cooler
SeaSonic M12II Bronze 620W ATX12V V2.3

find
quote
#58
I suspect the problem with EFI boot sequence might be the Sandy Bridge CPU, because the full UEFI bios as new feature was meant for the new CPU type at the time Ivy bridge. I think it could work with Ivy bridge cpu, someone with that cpu should test this theory
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in