Posts: 15
Threads: 0
Joined: Apr 2015
Reputation:
1
(03-01-2015, 01:10 AM)ZzBloopzZ Wrote: I have modified the official 3703 with the latest UBU tool, but with Intel RST OROM v12.9.0.2006 instead. v12.x is optimized and designed for Intel 6 series chipset. IE: Better performance and stability for Z68 motherboard over v13.5.0.2164 which SkebbZ used.
Fully tested by flashing my self using Asus EZ Flash 2 utility which is built-in to the BIOS. Be sure to reset to defaults after flashing, save and quit. Power off computer for 10 seconds, power back on and then go back into the BIOS to re-configure everything.
Download modified BIOS from HERE
OROM Versions:
Intel IRST RAID/SATA OROM: 12.9.0.2006
Intel VBIOS OROM: 2170
Intel LAN OROM: 1.5.61
Marvell SATA OROM/EFI: 1.0.0.0038 / 1.0.0.0034
JMicron SATA OROM: 1.07.28
Matching Drivers:
- Be sure to match with latest Intel RST v12.x driver. Currently it is v12.9.4.1000 WHQL. If drives are in AHCI mode, then no need to install the bloat RST software. Just install drivers only (typically in the F6 folder) via Device Manager. More info here.
- Use latest Intel Management Engine Interface (MEI) driver. Currently it is v10.0.30.1054. Do not use v10.0.38.1036, since this is the full MEI driver package and includes packages that are not needed for this motherboard.
Other Updates:
- Update the MEI firmware, after every BIOS flash. Currently it is v8.1.52.1496, found here. Before flashing the firmware, you will need to have the MEI driver installed first so that it can communicate properly.
- Update the Intel 82579V LAN Gbe firmware. Instructions here. This just needs to be updated once, since Asus EZ Flash 2 does not update the Gbe region in the BIOS chip.
- Update the ASMedia 104x USB 3.0 firmware. Instructions here. This has greatly increased USB 3.0 stability for me. I used to have numerous problems with my system crashing/freezing when plugging in certain USB 3 devices to my front USB 3.0 ports. Updating firmware made it totally stable/reliable! Be sure to match with latest ASMedia 104x drivers. Currently they are v1.16.23.
Latest drivers/firmware can typically be found here.
Thanks, man.
I knew about UBC Tool, but did't know about the "Other Updates", except Gbe firmware.
I flashed the lastest MEI firmware and ASMedia 104x USB 3.0 firmware - all works good 
Your info was very useful, thank you so much!
Intel Core i7-2600K + Corsair H105 + 2x Noctua NF-P12 PWM
ASUS P8Z68-V PRO/GEN3
16Gb (4x4Gb) G.SKILL Ripjaws X
ASUS ROG STRIX GTX 1080 Ti GAMING OC
128Gb Plextor M5 Pro + 1.5Tb Western Digital Caviar Black + 2x 4Tb Western Digital Caviar Black
Corsair Graphite Series 600TWM + Noctua NF-P12 PWM + Noctua NF-A20 PWM + 850W Seasonic X850 Gold
Posts: 7
Threads: 0
Joined: Nov 2014
Reputation:
1
Your very welcome! I have updated the BIOS with latest OROM's using BIOS update version 3802 that came out last week. Tested myself and all is working well.
Posts: 3
Threads: 1
Joined: Sep 2013
Reputation:
0
08-19-2015, 05:30 PM
(This post was last modified: 08-19-2015, 05:31 PM by SkebbZ.)
(04-12-2015, 11:03 PM)ZzBloopzZ Wrote: Your very welcome! I have updated the BIOS with latest OROM's using BIOS update version 3802 that came out last week. Tested myself and all is working well.
I have a strange problem ever since I installed Win8, and I am now having the same issue on Win10. Mechanical hard drives sometimes shut down for no reason, often during patching a game or other intensive tasks. Only way to get it back is to shut down fully or enter sleep mode and wake again...
Tried most drivers and stuff, no change :|
EDIT: I forgot to mention, this happens on both the marvell controller and the intel one.
Posts: 2
Threads: 0
Joined: Aug 2009
Reputation:
0
(03-01-2015, 01:10 AM)ZzBloopzZ Wrote: I have modified the official 3802 with the UBU v1.17 tool, but with Intel RST OROM v12.9.0.2006 instead. v12.x is optimized and designed for Intel 6 series chipset. IE: Better performance and stability for Z68 motherboard over v13.5.0.2164 which SkebbZ used.
Fully tested by flashing my self using Asus EZ Flash 2 utility which is built-in to the BIOS. Be sure to reset to defaults after flashing, save and quit. Power off computer for 10 seconds, power back on and then go back into the BIOS to re-configure everything.
Download modified 3802 BIOS from HERE. Modded on 4/12/15.
OROM Versions:
Intel IRST RAID/SATA OROM: 12.9.0.2006
Intel VBIOS OROM: 2170
Intel LAN OROM: 1.5.62
Marvell SATA OROM/EFI: 1.0.0.0038 / 1.0.0.0034
JMicron SATA OROM: 1.07.28
Matching Drivers:
- Be sure to match with latest Intel RST v12.x driver. Currently it is v12.9.4.1000 WHQL. LINK. If drives are in AHCI mode, then no need to install the bloat RST software. Just install drivers only (typically in the F6 folder) via Device Manager. More info here.
- Use latest Intel Management Engine Interface (MEI) driver. Currently it is v10.0.30.1054. LINK. Do not use v10.0.38.1036, since this is the full MEI driver package and includes packages that are not needed for this motherboard.
Other Updates:
- Update the MEI firmware, after every BIOS flash. Currently it is v8.1.52.1496, found here. Before flashing the firmware, you will need to have the MEI driver installed first so that it can communicate properly.
- Update the Intel 82579V LAN Gbe firmware. Instructions here. This just needs to be updated once, since Asus EZ Flash 2 does not update the Gbe region in the BIOS chip.
- Update the ASMedia 104x USB 3.0 firmware. Instructions here. This has greatly increased USB 3.0 stability for me. I used to have numerous problems with my system crashing/freezing when plugging in certain USB 3 devices to my front USB 3.0 ports. Updating firmware made it totally stable/reliable! Be sure to match with latest ASMedia 104x drivers. Currently they are v1.16.23.
Latest drivers/firmware can typically be found here.
Fantastic, really appreciate that you built this.
I also updated the peripheral firmware per your advice... I didn't realise that some of them you needed to 'reupdate' every flash!
station-drivers has a slightly more current version of the ASMedia 104x firmware ASMedia 104x firmware which I tried and it works fine. You still need their drivers in Windows 10...
If only I could find RAlink drivers that worked in Windows10...
~Red
Posts: 7
Threads: 0
Joined: Nov 2014
Reputation:
1
10-05-2016, 08:04 PM
(This post was last modified: 10-05-2016, 08:05 PM by ZzBloopzZ.)
I have updated the BIOS and also included 3 different versions of the BIOS based on specific user requirements/needs.
Also, updated versions and links to the latest drivers/firmware as of October 5, 2016.
Here is a direct link to the post.
Posts: 2
Threads: 0
Joined: Aug 2009
Reputation:
0
(10-05-2016, 08:04 PM)ZzBloopzZ Wrote: I have updated the BIOS and also included 3 different versions of the BIOS based on specific user requirements/needs.
Also, updated versions and links to the latest drivers/firmware as of October 5, 2016.
Here is a direct link to the post.
You sir are a star I shall head over there right now.
~Red
Posts: 16
Threads: 0
Joined: Dec 2017
Reputation:
0
(10-05-2016, 08:04 PM)ZzBloopzZ Wrote: I have updated the BIOS and also included 3 different versions of the BIOS based on specific user requirements/needs.
Also, updated versions and links to the latest drivers/firmware as of October 5, 2016.
Here is a direct link to the post.
Hey ZzBloopzZ!
I've been using your updated bios on the previous page for over a year and it really made my system snappy. Thanks! I just wanted to write and say that there are recently updated firmware for the Intel MEI (v8.1.70.1590) and Intel LAN OROM (v1.5.85) and maybe some others.
Since our P8Z68s are aging a bit, it would be great if you could make one more master BIOS with the very latest (last?) firmware/microcode updates included. Thanks again and Merry Christmas!
Cyberia
Where I found the Intel LAN OROM
https://www.intel.com/content/www/us/en/...ducts.html
ASUS P8Z68-V PRO/GEN3
Intel Core i5-2500K OC @ 4.6Ghz
16GB 2133Mhz DDR3 (4x4GB) G.SKILL Ripjaws Z
EVGA GeForce GTX 1080 SC GAMING ACX 3.0
Sound Blaster Z PCIe -> SPDIF DTS -> MidiLand S4 8200 v2.0 Receiver
240GB OCZ Vertex 3 SATA III MLC + 2x 2TB Seagate Constellation (RAID 1)
Noctua NH-U12P SE2 120mm Push-Pull CPU Cooler
SeaSonic M12II Bronze 620W ATX12V V2.3
Posts: 5
Threads: 0
Joined: Dec 2017
Reputation:
0
Hello!
Please, can anybody share the latest modified bios 3802 for Asus P8Z68-V PRO/GEN3 with SLIC and latest OROMs/LAN/VGA/NVMe?
3-4 years before I think I can make it by myself, but now I have no time to researching with 2 little babies... =)
Thank you VERY much!
Marry Christmas and happy New Year!!!
Posts: 15
Threads: 0
Joined: Apr 2015
Reputation:
1
ASUS P8Z68-V PRO/GEN3 BIOS 3802 with SLIC 2.1 and all OROMS/LAN/VGA updated.
Used UBU Tool version 1.69.10.1 and PhoenixTool 2.73 (for adding SLIC).
Fully tested by my self using Asus EZ Flash 2 utility.
Download modified 3802 BIOS from HERE.
OROM Versions:
Intel IRST RAID/SATA OROM: 12.9.0.2006 (recommended for Intel 6-Series Chipsets)
Intel VBIOS OROM: 2171
LAN Intel Boot Agent GE OROM: 1.5.62
LAN Intel Boot Agent CL OROM: 0.1.13
CL - refers to clients supports, which is for the Gigabit LOM’s (Desktop Lan On Motherboard)
GE - refers to supports for server silicon (Server Adapters)
Info from: https://communities.intel.com/thread/98013
Marvell SATA OROM/EFI: 1.1.0.1002 / 1.0.0.0034
JMicron SATA OROM: 1.07.28
CPU MicroCodes: 29 (latest) - Sandy Bridge, 1C (latest) - Ivy Bridge
Regards,
RaYMaN
Intel Core i7-2600K + Corsair H105 + 2x Noctua NF-P12 PWM
ASUS P8Z68-V PRO/GEN3
16Gb (4x4Gb) G.SKILL Ripjaws X
ASUS ROG STRIX GTX 1080 Ti GAMING OC
128Gb Plextor M5 Pro + 1.5Tb Western Digital Caviar Black + 2x 4Tb Western Digital Caviar Black
Corsair Graphite Series 600TWM + Noctua NF-P12 PWM + Noctua NF-A20 PWM + 850W Seasonic X850 Gold
Posts: 5
Threads: 0
Joined: Dec 2017
Reputation:
0
(01-14-2018, 02:59 AM)RaYMaN Wrote: ASUS P8Z68-V PRO/GEN3 BIOS 3802 with SLIC 2.1 and all OROMS/LAN/VGA updated.
....
Thank you very much!
Will try to use your new bios.
Please, can you add the NvME support for using M2 disks with our mobo?
Thank you!
|
![[Valid RSS]](valid-rss.png "Validate my RSS feed")
