Login

xryptic · 10-27-2009, 01:03 PM

Is this BIOS safe to use on a U2010?

***1234s282*** · 10-27-2009, 02:19 PM

(10-27-2009, 01:03 PM)xryptic Wrote: Is this BIOS safe to use on a U2010?

Generally , If the same bios update shows up for both models on the official Fujitsu site (As in exactly the same file name/update name) , you SHOULD be able to use this mod

Admin

rbjack · (This post was last modified: 10-27-2009, 07:51 PM by rbjack.)

(10-27-2009, 01:03 PM)xryptic Wrote: Is this BIOS safe to use on a U2010?

The firmware 1.18 for u820 and 1.18 u2020/2010 are the same. This firmware is 1.22 which was never put out for the u2020/2010. You could guess it would work as the U820 is reported to be the US model of the U2020/2010 but that is only a guess...

edit: corrected model number

xryptic · 10-28-2009, 06:39 AM

Yeah, thats what I'm afraid that the 1.22 might be different, but its hard to say.

rbjack · 10-28-2009, 08:26 AM

(10-28-2009, 06:39 AM)xryptic Wrote: Yeah, thats what I'm afraid that the 1.22 might be different, but its hard to say.

Post a clean (no loaders or mods) RW Report of ACPI. I have the bios file already.

xryptic · (This post was last modified: 10-28-2009, 09:35 AM by xryptic.)

(10-28-2009, 08:26 AM)rbjack Wrote:
(10-28-2009, 06:39 AM)xryptic Wrote: Yeah, thats what I'm afraid that the 1.22 might be different, but its hard to say.
Post a clean (no loaders or mods) RW Report of ACPI. I have the bios file already.

Cant seem to run RW. It hanged my system.

I do see the BIOSHeader.ini seems to be the same except for the checksum and version which is expected.

[BIOS_Info]
Interface=GABI
Board_ID=0x000101EE
SectorMask=0x3FFEC
BIOS_Version=0x80011400
Checksum=0

The BIOSHeader.ini BTW is from the U2010 BIOS updater, if its even of any use

rbjack · 10-28-2009, 11:22 AM

(10-28-2009, 08:50 AM)xryptic Wrote:
(10-28-2009, 08:26 AM)rbjack Wrote:
(10-28-2009, 06:39 AM)xryptic Wrote: Yeah, thats what I'm afraid that the 1.22 might be different, but its hard to say.
Post a clean (no loaders or mods) RW Report of ACPI. I have the bios file already.

Cant seem to run RW. It hanged my system.

I do see the BIOSHeader.ini seems to be the same except for the checksum and version which is expected.

[BIOS_Info]
Interface=GABI
Board_ID=0x000101EE
SectorMask=0x3FFEC
BIOS_Version=0x80011400
Checksum=0
The BIOSHeader.ini BTW is from the U2010 BIOS updater, if its even of any use

Here try this one for 1.18. Extract and run flashaid tool.
http://www.sendspace.com/file/z3g9vh
passwd "yesiwanttoflashmodbios"

xryptic · 10-28-2009, 11:54 AM

Sorry I should have mentioned earlier, I should have posted its latest firmware. For U2010/U2020 there is a 1.20 released:

http://www.fujitsu-pc-asia.com/drivers/D...10v120.exe

rbjack · 10-28-2009, 12:29 PM

(10-28-2009, 11:54 AM)xryptic Wrote: Sorry I should have mentioned earlier, I should have posted its latest firmware. For U2010/U2020 there is a 1.20 released:

http://www.fujitsu-pc-asia.com/drivers/D...10v120.exe

Same as the other instructions. 2010/2020 1.20
http://www.sendspace.com/file/e22o1s
passwd "yesiwanttoflashmodbios"

xryptic · 10-28-2009, 12:47 PM

(10-28-2009, 12:29 PM)rbjack Wrote:
(10-28-2009, 11:54 AM)xryptic Wrote: Sorry I should have mentioned earlier, I should have posted its latest firmware. For U2010/U2020 there is a 1.20 released:

http://www.fujitsu-pc-asia.com/drivers/D...10v120.exe

Same as the other instructions. 2010/2020 1.20
http://www.sendspace.com/file/e22o1s
passwd "yesiwanttoflashmodbios"

Many Thanks!!!
Going in BIOS is ok and everything seems to be working super.
Win 7 is activated. Big Grin

Using SLIC dump toolkit, it reports SLIC 2.1

Login
Username:
Password:	Lost Password?
	Remember me