Gigabyte GA-8I945GZME-RH: Support for Core 2 Duo E7500 & Pentium E5700

[DeathBringer]

Make current BIOS backup by Universal BIOS Backup ToolKit 2.0

[Zambezy76rus]

Сделайте текущую резервную копию BIOS с помощью Universal BIOS Backup ToolKit 2.0

Done

[DeathBringer]

Well.
I need TXT-reports of CPU-Z with two my mod.
After flashing you must do Load Defaults in BIOS.

[Zambezy76rus]

колодец.
Мне нужны TXT-отчеты CPU-Z с двумя моими модами.
После перепрошивки необходимо выполнить Load Defaults в BIOS.

Done ! (Gigabyte and ESC) Clear CMOS

[DeathBringer]

Two TXT-reports for two mod for this motherboard only.

[Zambezy76rus]

Два TXT-отчета только для двух модов для этой платы.

Done!

[DeathBringer]

OK. It's bug of ThrottleStop - SteedStep is enabled in both cases.
So second mod is useless.
And this work is completed. Use first mod.

[Zambezy76rus]

Два TXT-отчета только для двух модов для этой платы.

I tracked this pattern : the Processor resets the frequency without load (checked in Cpu-z and Aida 64 and even after the load in the CPU Queen benchmark... ) As soon as I start Throttle Stop - the multiplier is fixed at the maximum X15 and does not reset even after closing this program . Checked with both of your mods!

[Zambezy76rus]

OK. It's bug of ThrottleStop - SteedStep is enabled in both cases.
So second mod is useless.
And this work is completed. Use first mod.

Flashed! Everything is fine and stable! The processor drops the multiplier to x6 in idle time.

[DeathBringer]

As soon as I start Throttle Stop - the multiplier is fixed at the maximum X15 and does not reset even after closing this program . Checked with both of your mods!

Did you delete file ThrottleStop.ini before runing ThrottleStop?