Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HP MCP61PM-HM (Nettle3) 5.17 With Unlocked Overclocking Options
currently reading this 
https://www.bios-mods.com/bios-recovery/...-recovery/
would this be the correct route to get back to stock bios then re do everything but nettle 3 lmao
im such a greenthub but hey im learning how to mess things up...
find
quote
(02-26-2019, 10:42 AM)cosmothelame Wrote: currently reading this 
https://www.bios-mods.com/bios-recovery/...-recovery/
would this be the correct route to get back to stock bios then re do everything but nettle 3 lmao
im such a greenthub but hey im learning how to mess things up...


you can try...

are you sure your other board has a mountable / plugable eeprom bios chip?

are the chips of the same model, or of the same size?
you could try a hot swap, meaning. you boot the other board, go under FREEDOS, then unplug the bios chip, plug the bricked chip, and then start the DOS command to flash the chip. when done, you switch off, take the bios chip out and try on the nettle 3
find
quote
(02-26-2019, 10:52 AM)bolc Wrote:
(02-26-2019, 10:42 AM)cosmothelame Wrote: currently reading this 
https://www.bios-mods.com/bios-recovery/...-recovery/
would this be the correct route to get back to stock bios then re do everything but nettle 3 lmao
im such a greenthub but hey im learning how to mess things up...


you can try...

are you sure your other board has a mountable / plugable eeprom bios chip?

are they of the same model? if yes, you could try a hot swap, meaning.
you boot the other board, go under FREEDOS, then unplug the bios chip, plug the bricked chip, and then start the DOS command to flash the chip. when done, you switch off, take the bios chip out and try on the nettle 3

ok so the mcp61pm-hm rev 2.2 is the mobo with bios chip that I put nettle 2 by mistake
I have the other board mcp61pm-hm rev 1.1 and it has no 8 pin chip the boards are slightly different but working and running win 7 ultimte
so if I power up the 1.1 mobo is there a way to connect the 2.2 some how n flash that way lol
find
quote
ok so could I just re download everything to my laptop then format usb then put old bios on the usb plug it into desktop and power it on would that force it to load so I could see bios? I currently don't have another bios chip or re flashboard.

is there not a way to do this by usb? im stuck at black screen no beeps or sounds.


just need to find a way to re program stock bios via usb? is it possible
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in