Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Insyde h20 - new Lenovo Ideapad 100-15IBD logo
#1
Hi!
I have Lenovo Ideapad 100-15IBD with Insyde H20 BIOS.
In public I found only 2 flasing utils: InsydeFlash v5.3.8.0 from very old E0CN23WW BIOS, and H2OFFT-W v5.5.8.1 from new E0CN61WW BIOS.
All FD files from E0CN23WW and E0CN61WW  have 9,63 МБ (10 105 280 byte) size and open in InsydeH2OEZE_x86_WIN_100.00.02.13, but in section "Logo" - I can't see any logo and can't make nothing.
But after modifying platform.ini I somehow create dump my current BIOS: E0CN63WW with "good" size - 8,00 МБ (8 388 608 byte). And this file is good opened in EZE, in section "Logo" is 4 logo with last "Burning Lenovo" it TGA format, that in EZE I can change it very simple.
But I can't write my new FD file in BIOS chip, H2OFFT-W gives message: "It only supports to flash secure BIOS..."
OK. I blew off BIOS chip (Winbond w25q64fv), read old and write my moded file.
But dump, that I read from chip is not opened in EZE and notebook is not started with new firmware.

My question: how I can "translate" FD file that I make in EZE to "hardware" chip format? It is possible? 

In attachments: BIN file - I read from chip, FD file - e0cn61ww.fd (original), e0cn63ww.fd (I somehow create Smile ) e0cn63ww-nissan-logo.fd (with my new logo for my CarPC)


Attached Files
.rar   BIOS-dump.rar (Size: 12.54 MB / Downloads: 20)
find
quote
#2
(04-10-2018, 08:23 AM)alex_ank_1965 Wrote: Hi!
I have Lenovo Ideapad 100-15IBD with Insyde H20 BIOS.
In public I found only 2 flasing utils: InsydeFlash v5.3.8.0 from very old E0CN23WW BIOS, and H2OFFT-W v5.5.8.1 from new E0CN61WW BIOS.
All FD files from E0CN23WW and E0CN61WW  have 9,63 МБ (10 105 280 byte) size and open in InsydeH2OEZE_x86_WIN_100.00.02.13, but in section "Logo" - I can't see any logo and can't make nothing.
But after modifying platform.ini I somehow create dump my current BIOS: E0CN63WW with "good" size - 8,00 МБ (8 388 608 byte). And this file is good opened in EZE, in section "Logo" is 4 logo with last "Burning Lenovo" it TGA format, that in EZE I can change it very simple.
But I can't write my new FD file in BIOS chip, H2OFFT-W gives message: "It only supports to flash secure BIOS..."
OK. I blew off BIOS chip (Winbond w25q64fv), read old and write my moded file.
But dump, that I read from chip is not opened in EZE and notebook is not started with new firmware.

My question: how I can "translate" FD file that I make in EZE to "hardware" chip format? It is possible? 

In attachments: BIN file - I read from chip, FD file - e0cn61ww.fd (original), e0cn63ww.fd (I somehow create Smile ) e0cn63ww-nissan-logo.fd (with my new logo for my CarPC)
Hi
Bios mod can be flashed using SPI-programmer+SOIC8 clip only
find
quote
#3
(04-10-2018, 11:34 AM)Dudu2002 Wrote:
(04-10-2018, 08:23 AM)alex_ank_1965 Wrote: Hi!
I have Lenovo Ideapad 100-15IBD with Insyde H20 BIOS.
In public I found only 2 flasing utils: InsydeFlash v5.3.8.0 from very old E0CN23WW BIOS, and H2OFFT-W v5.5.8.1 from new E0CN61WW BIOS.
All FD files from E0CN23WW and E0CN61WW  have 9,63 МБ (10 105 280 byte) size and open in InsydeH2OEZE_x86_WIN_100.00.02.13, but in section "Logo" - I can't see any logo and can't make nothing.
But after modifying platform.ini I somehow create dump my current BIOS: E0CN63WW with "good" size - 8,00 МБ (8 388 608 byte). And this file is good opened in EZE, in section "Logo" is 4 logo with last "Burning Lenovo" it TGA format, that in EZE I can change it very simple.
But I can't write my new FD file in BIOS chip, H2OFFT-W gives message: "It only supports to flash secure BIOS..."
OK. I blew off BIOS chip (Winbond w25q64fv), read old and write my moded file.
But dump, that I read from chip is not opened in EZE and notebook is not started with new firmware.

My question: how I can "translate" FD file that I make in EZE to "hardware" chip format? It is possible? 

In attachments: BIN file - I read from chip, FD file - e0cn61ww.fd (original), e0cn63ww.fd (I somehow create Smile ) e0cn63ww-nissan-logo.fd (with my new logo for my CarPC)
Hi
Bios mod can be flashed using SPI-programmer+SOIC8 clip only

Hi, I understand Smile .  I remove flash from mainboard and I wrote FD file in w25q64fv using spi-programmer. But FD file and BIN (that I read from flash) is VERY!!! different
find
quote
#4
(04-10-2018, 11:55 AM)alex_ank_1965 Wrote: Hi, I understand Smile .  I remove flash from mainboard and I wrote FD file in w25q64fv using spi-programmer. But FD file and BIN (that I read from flash) is VERY!!! different
First use SPI-programmer and make bios dump
This dump needs to be modified
find
quote
#5
(04-10-2018, 12:00 PM)Dudu2002 Wrote:
(04-10-2018, 11:55 AM)alex_ank_1965 Wrote: Hi, I understand Smile .  I remove flash from mainboard and I wrote FD file in w25q64fv using spi-programmer. But FD file and BIN (that I read from flash) is VERY!!! different
First use SPI-programmer and make bios dump
This dump needs to be modified
I have 2 NB with 2 different BIOS and I read from 2 flash chip 2 BIN files, but this BIN files not opened in InsydeH2OEZE.
How I can modify this dump?
find
quote
#6
(04-10-2018, 12:07 PM)alex_ank_1965 Wrote: I have 2 NB with 2 different BIOS and I read from 2 flash chip 2 BIN files, but this BIN files not opened in InsydeH2OEZE.
How I can modify this dump?
I do not see these files... Smile
find
quote
#7
(04-10-2018, 12:53 PM)Dudu2002 Wrote:
(04-10-2018, 12:07 PM)alex_ank_1965 Wrote: I have 2 NB with 2 different BIOS and I read from 2 flash chip 2 BIN files, but this BIN files not opened in InsydeH2OEZE.
How I can modify this dump?
I do not see these files... Smile

Look in rar archive on first message: e0cn16ww.bin and e0cn61ww.bin. I think e0cn61ww.bin is broken because this flash chip was on broken mainboard. e0cn16ww.bin - is good.
find
quote
#8
(04-10-2018, 12:57 PM)alex_ank_1965 Wrote:
(04-10-2018, 12:53 PM)Dudu2002 Wrote:
(04-10-2018, 12:07 PM)alex_ank_1965 Wrote: I have 2 NB with 2 different BIOS and I read from 2 flash chip 2 BIN files, but this BIN files not opened in InsydeH2OEZE.
How I can modify this dump?
I do not see these files... Smile

Look in rar archive on first message: e0cn16ww.bin and e0cn61ww.bin. I think  e0cn61ww.bin is broken because this flash chip was on broken mainboard. e0cn16ww.bin - is good.

BINGO!!! My e0cn16ww.bin - is opened in EZE!
Thanks! Tomorrow I try write BIOS mod.
find
quote
#9
(04-10-2018, 01:10 PM)alex_ank_1965 Wrote:
(04-10-2018, 12:57 PM)alex_ank_1965 Wrote:
(04-10-2018, 12:53 PM)Dudu2002 Wrote:
(04-10-2018, 12:07 PM)alex_ank_1965 Wrote: I have 2 NB with 2 different BIOS and I read from 2 flash chip 2 BIN files, but this BIN files not opened in InsydeH2OEZE.
How I can modify this dump?
I do not see these files... Smile

Look in rar archive on first message: e0cn16ww.bin and e0cn61ww.bin. I think  e0cn61ww.bin is broken because this flash chip was on broken mainboard. e0cn16ww.bin - is good.

BINGO!!! My e0cn16ww.bin - is opened in EZE!
Thanks! Tomorrow I try write BIOS mod.

This old BIOS have 7 TGA images with "Lenovo" logo. Size of images: from 307*409 to 1536*864
find
quote
#10
In last public BIOS (e0cn61ww) LOGO is good modded by insydeH2Oeze.
Size of LOGO is 548*308 in any format (eze make convert to TGA formats):
1. Update current BIOS to last public
2. Use SPI-prog to read BIOS from SPI ROM 
3. Update Logo with insydeH2Oeze
4. Write BIOS to SPI ROM.
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in