[REQUEST] Eglobal S210H BIOS Unlock

[nicolbif]

@nicolbif

Could you reflash the bios dump again??
If can't ,please backup bios via intel fpt tool again.

Hello

Thanks for your reply

I didn(t find intel fpt tool last version so I dumped my bios with afuwin64...

Could you give me a link to download it please.

I found 11.0 version but I've an error message...
Error 2: Failure. Unexpected error occurred

Thanks again for your help

Best regards,
Nico

[genius239]

Refer to this link and use version 12.[censored] fpt.
https://www.win-raid.com/t596f39-Intel-C...Tools.html

[nicolbif]

Refer to this link and use version 12.[censored] fpt.
https://www.win-raid.com/t596f39-Intel-C...Tools.html

Thx!

Here is the dump...made by FPT

Best regards,
Nico

[genius239]

@nicolbif

Try my mod and respond to the result.

[nicolbif]

@nicolbif

Try my mod and respond to the result.

Tremendous!! All "advanced options" are unlocked, now

send you a "gift" by paypal

See U for another bios...

Have a nice day

Best regards,
Nico

[genius239]

@nicolbif
Thanks for the response.
I don't familiar with hackintosh ,i can only do is unlock menu for you.

The mod is for nicolbif's machine only ,other people don't try to flash it ,please!

[CotswoldPhoto]

Hi All

This is a dreaded, and probably to be oft repeated question, about Windows 11. The board in this mini PC does not have a hardware TPM module (No TPM = No Windows 11), so the BIOS has no setting to enable/disable. That makes sense.

But, Intel CPUs have their own TPM module, and have done for a few years now (6th gen onwards I am told). In my S201H is a 10th gen i9 10880H (Comet Lake architecture).

So, to the question, does the unlocked BIOS have a TPM setting, and will it switch the Intel TPM on so that Windows will see it?

eglobal simply say, NO, we cannot change the BIOS.

I have the Aptio 2.21.1277 BIOS

I did manage to switch secure boot UEFI on, after changing the mode to User, which is the other Windows 11 requirement AFAIK.

Grateful thanks in advance.

[genius239]

@CotswoldPhoto
I thought it's possible ,recently i seen many people are talking about win11+tpm ,it's very interesting ,so i tried to only set "TPM Device Selection" to Firmware TPM in bios(on my pc current value of "Security Device Support" is enable ,so i didn't adjust it) ,then below is my tpm test report and it should is enable.
In tpm.msc
https://images2.imgbox.com/45/f4/TEw5cxUu_o.png

In WhyNotWin11
https://imgbox.com/YfpjMFBP

My pc configuration is 9400f+b150 motherboard +win7(legacy mode) ,it only a old intel 8th gen platform , but yours is 10th gen ,so this is why i feel it's possible to enable tpm at your machine.
In model s210h also has option "TPM Device Selection" and other option that related with tpm included ,maybe you could try to tune them in bios.
https://images2.imgbox.com/51/76/JjXIqWoo_o.png
https://images2.imgbox.com/eb/31/hOyL1R38_o.png
https://images2.imgbox.com/c3/ec/3gjyYnH4_o.png

[CotswoldPhoto]

Thanks for the reply @genius239

This is my WhyNotWin11 after I set the PC to secure boot and boot method to UEFI (took me a while to figure I had to change to 'user'):

https://www.screencast.com/t/E6l4uV0xE

Looks like the rest is set OK, except for TPM.

Where do I download the unlock BIOS from, and are there instructions for flashing it, or do you need to make an unlock BIOS for me?

It must be over 20 years since I flashed a BIOS!!!

[genius239]

@CotswoldPhoto

First make a bios dump with this tool then attach(run dump.bat as administrator) ,i'll check whether it can be unlock options or features in bios.