[REQUEST] Lenovo Y50-70 (9ECNxxWW) BIOS Unlock

[Da Vinci Code]

Advanced->DPTF Configuration. I found these option here.

[Fugy87]

ok i find DPTF Configuration srry that i let you search

also i change: Hot thermal Trip Point: from 51 to 63. nothing change. this is really complicated.

i want that the fan is under 65C off. i unpluged both fans from my notebook, so they cant work. then look at the temp. and surf all the time. the temp. always 45-63. thats fine for me. without fan. i use youtube, firefox and office.

can i control the fan with the app "speedfan". i mean. i change a config in bios. maybe then in speedfan visible? or can you say me how i config the bios that my wishes work.

regards

[maxxoz]

Hello, maxxoz!
We need your bios dump. Each bios is unique and mod will work personality only, another users flash it and can brick laptop!
Regards.

Hello , thanks for your answer,
i'm sorry to ask that , but how do I extract my BIOS to send it to you?
I've been looking for that everywhere, but every time i see a post with a tool to do it, the link says the file is "restricted".
I've found a tool on the web aso, there was a trojan in it...
Thanks!

Regards

Hello! Thanks for the link.
Here is my BIOS backup : https://www.sendspace.com/file/aje7wy
Could you please help me having the unlocked BIOS on my Lenovo y50-70, so i'll be able to set the video memory on 128Mb?
I'm sorry to ask that, but what shall I do then with the modify BIOS to flash it? I've been around a lot of forums and posts, but didn't find the answer. Do you know a link to a tutorial for example?
Thanks!

[Da Vinci Code]

Here you go
http://rghost.net/8CYCT2Clq
You need downgrade to 1.13 or 1.14 version.
When you start flashing mod please use suspended mode, after few seconds wake up and continue.
Regards.

[Da Vinci Code]

Thermal Configuration->Platform Thermal configuration.
option Passive Thermal Trip point 95 C as default.Did you tried to change it?I see most of thermal options are disabled. So fan optoins can be hidden in another modules.
HP bios contain interest option-Fan always ON. I disable this option and in one time fan off under unknown option. I unlocked Power tab and found it is 65 C)
You can disable fan1 device, i found this option.
I found 3 fan options in my BIOs.
Fan always On-in Sysyem configuration (visible as default)
Fan On temperature -50 C (As default)
Throttle On temperature -75 C (As default).
Two last options are located in Power Tab, which hidden by vendor.
I disabled option Fan always On then switched Fan on temperature to 60 and restart laptop. Fan disabled and now i don't hear loud.

[maxxoz]

Here you go
http://rghost.net/8CYCT2Clq
You need downgrade to 1.13 or 1.14 version.
When you start flashing mod please use suspended mode, after few seconds wake up and continue.
Regards.

Thanks! I've just done the donation.
Do you know if i can downgrade to 1.13 version with the official lenovo BIOS application?
I think i have already found the BIOS. Just need to find out how to do the downgrade

Regards

[Fugy87]

Thermal Configuration->Platform Thermal configuration.
option Passive Thermal Trip point 95 C as default.Did you tried to change it?I see most of thermal options are disabled. So fan optoins can be hidden in another modules.
HP bios contain interest option-Fan always ON. I disable this option and in one time fan off under unknown option. I unlocked Power tab and found it is 65 C)
You can disable fan1 device, i found this option.
I found 3 fan options in my BIOs.
Fan always On-in Sysyem configuration (visible as default)
Fan On temperature -50 C (As default)
Throttle On temperature -75 C (As default).
Two last options are located in Power Tab, which hidden by vendor.
I disabled option Fan always On then switched Fan on temperature to 60 and restart laptop. Fan disabled and now i don't hear loud.

fan always on config i dont find in my bios.
i try change thermal, with any results.
now i disable both fans.(fan1 and fan2) nothing change. they work normaly. i still trying to find the fan options

[maxxoz]

Here you go
http://rghost.net/8CYCT2Clq
You need downgrade to 1.13 or 1.14 version.
When you start flashing mod please use suspended mode, after few seconds wake up and continue.
Regards.

Thanks! I've just done the donation.
Do you know if i can downgrade to 1.13 version with the official lenovo BIOS application?
I think i have already found the BIOS. Just need to find out how to do the downgrade

Regards

I've found the file 9ecn31ww.exe and the way to do the downgrade with it,
but do you know if it will work with windows 10? In this official link
Lenovo talks only about windows 8
https://download.lenovo.com/consumer/mob...cn31ww.txt

Thanks

[Da Vinci Code]

Hello, maxxoz!
If it not working under win 10, so you need downgrade to win 7 or win 8.
Follow steps in that document, when you downgraded to 1.14, prepare RUFUS usb stick, copy all content of mod folder and boot from usb.
Regards.

[Gargajo]

Hello again...

Please, help me to unlock advanced menu for wake on lan.

My Lenovo y50-70 backup bios:

http://rghost.net/6v6ZWY78S

Thank you!!!

Can anyone help me please?