Login

***Da Vinci Code*** · (This post was last modified: 03-13-2016, 01:46 PM by Da Vinci Code.)

I think win 10 is reason of all fails. So in future i never do mods before downgrading win 10 to 8 or 7... Sad

Did you unplugged wifi adapter, mini-pcie slot must be empty?

iAchilles · (This post was last modified: 03-13-2016, 01:57 PM by iAchilles.)

(03-13-2016, 01:45 PM)Da Vinci Code Wrote: I think win 10 is reason of all fails. So in future i never do mods before downgrading win 10 to 8 or 7...
Did you unplugged wifi adapter, mini-pcie slot must be empty?

i didnt unplug wifi adapter since i dont know which one is wifi adapter ! all stuff in lenovo y50-70 are so soldered which make unplugging really tricky for me.

i just removed the battery and the CMOS battery connector, then pushed the power button for like 30 sec (as it was explained in another thread) and then power it on, and even checked the bios setting afterward and "date" was reset to 2013 which is a sign of successful CMOS reset procedure.

if it's really necessary to unplug the wifi adapter, would u kindly walk me through which unit is wifi adapter

***Da Vinci Code*** · 03-13-2016, 02:03 PM

Look here https://www.youtube.com/watch?v=kX7sewRnY14
You find wifi adapter with 2 or 3 antennas at this video!

iAchilles · 03-13-2016, 02:06 PM

(03-13-2016, 02:03 PM)Da Vinci Code Wrote: Look here https://www.youtube.com/watch?v=kX7sewRnY14
You find wifi adapter with 2 or 3 antennas at this video!

ok i should take the whole wifi adapter out ? or just take the antennas out ?

and when i did that, i should make CMOS reset again ?

***Da Vinci Code*** · (This post was last modified: 03-13-2016, 02:13 PM by Da Vinci Code.)

dettach antennas, unplug adapter. Clearing CMOS not needed
NOTE!!There is big mistake at video!!
You must dettach battery and AC Adapter first before disassembling laptop!!

iAchilles · (This post was last modified: 03-13-2016, 03:25 PM by iAchilles.)

(03-13-2016, 02:07 PM)Da Vinci Code Wrote:
dettach antennas, unplug adapter. Clearing CMOS not needed
NOTE!!There is big mistake at video!!
You must dettach battery and AC Adapter first before disassembling laptop!!

thx for the note
so after complete detachment of wifi adapter, then i should plug the ac adapter in and turn the laptop on while still the wifi adapter is detached ????

(i'm gonna try this in the morning since it's really late now and i'm gonna let u know of the result)

iAchilles · 03-14-2016, 03:45 AM

(03-13-2016, 02:07 PM)Da Vinci Code Wrote:
dettach antennas, unplug adapter. Clearing CMOS not needed
NOTE!!There is big mistake at video!!
You must dettach battery and AC Adapter first before disassembling laptop!!

i detached the wifi adapter completely, again cleared the CMOS, and then started the system

the problem still exists Sad

what should i do NOW ?

***Da Vinci Code*** · 03-14-2016, 04:06 AM

Try to disable UEFI mode and enable Legacy, disable Secure boot and boot from usb stick with mod and flash it!

iAchilles · 03-14-2016, 04:29 AM

(03-14-2016, 04:06 AM)Da Vinci Code Wrote: Try to disable UEFI mode and enable Legacy, disable Secure boot and boot from usb stick with mod and flash it!

i just tried that man, didn't work !! system seems have a problem to boot in general, nothing boots

even i made my usb windows 10-bootable to see if it can boot from windows installer, didn't work either !

***Da Vinci Code*** · 03-14-2016, 04:36 AM

So i have no idea what do next.You are first who have this problem Sad

We cannot flash mod with USB stick!But we can to flash mod directly into bios chip with HW SPI Programmer and Pomona CLIP.
https://www.bios-mods.com/forum/Thread-R...val?page=3
If you get/buy this tools then i can help you to flash mod!

Login
Username:
Password:	Lost Password?
	Remember me