Toshiba Satellite L300 v2.1 Toshiba 2.1 SLIC

[lilocat]

Manufacturer: Toshiba
Model : Satellite L300
Bios Revision : 1.50
Bios Type : InsydeH2O Rev. 3.0
Bios Link : http://support.toshiba.ca/support/Downlo...50-WIN.exe

Thanks in advance.

[1234s282]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt: slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[lilocat]

The mod doesn't work, checked with SLIC Dump Tool, Status shows "Dump OK! (but SLIC OEM ID or Digital Signature Error!)

[1234s282]

Please put up some Pictures of the Slic Toolkit Screens (when the modded bios is installed)

Then flash back to the none modded bios

Create an RW Everything Report. (From the original bios , not the modded one , thats why we would like you to flash back the original)

How To Create An RW Everything Report

Download and Install RWEverything from one of the following links:
http://jacky5488.myweb.hinet.net/
http://jacky5488.myweb.hinet.net/bin/RwV1.4.zip
http://slics.myftp.org/Tools/RwV1.4.rar

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to

your post or upload it to one of the following:
http://www.box.net or http://www.mediafire.com or http://www.sendspace.com

If you upload your RWEverything Report to one of the 3 host servers above, post the download link of

your RWEverthing Report in the Post of your Mod Request.

Below is the preferred method in which to post your mod requests:

-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type:
-Bios Download Link:
-RW Everything Report Download Link:


When we have this information , we have greater chances of completing this mod successfully

Regards
Admin

[lilocat]

I need some help. Can you please create the orginal bios as a .FD file, so that I can flash my pc. Toshiba only provides the exe file, which won't let me flash since the original and the modded both have the same version number, and I can't just choose to overwrite it. Need the original bios alone, thanks for the help.

[1234s282]

Here:-

http://dl.dropbox.com/u/747181/Toshiba%2...IGINAL.zip

Original , Unmoodded , Extracted

Regards
Admin

[lilocat]

Here some screen shots of SLIC Dump ToolKit with the modded bios.

   

   

   

   

Will post the RW reports later.

[1234s282]

Thanks , We NEED the RW Everything Report to mod this time , as modding without the report didnt work!

Admin

[lilocat]

Manufacturer: Toshiba
Model : Satellite L300
Bios Revision : 1.50
Bios Type : InsydeH2O Rev. 3.0
Bios Link : http://support.toshiba.ca/support/Downlo...50-WIN.exe

Thanks in advance.

RW Everything Link : http://www.box.net/shared/6u7qs5jphy


Again, thanks for the help.

[1234s282]

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin