Login

leolift · (This post was last modified: 04-29-2020, 12:55 PM by DeathBringer.)

hello, if it is not the right section, I apologize ...

I have successfully modified other utilities, but I don't understand this.
i want to unlock advanced settings.

can you help me understand where to insert the variable?

EFI Protocol Detected

--------------------------------------------------------------------------------

String Packages

--------------------------------------------------------------------------------

Offset: Language:

--------------------------------------------------------------------------------

0xF080 eng

0x1BA68 fra

0x2941A chn

0x31DEE jpn

0x3E33C ita

0x4B3B8 spa

0x59222 ger

0x66758 por

Form Sets

--------------------------------------------------------------------------------

Offset: Title:

--------------------------------------------------------------------------------

0x73450 Main (0xE9)

0x735D0 Exit (0x365)

0x73700 System Configuration (0x5B)

0x73DD0 Power (0x2E5)

0x746D0 Security (0x36)

0x747C0 Advanced (0xFB)

0x77B10 Main (0x4)

0x77DD0 Diagnostics (0x42)

Internal Forms Representation

--------------------------------------------------------------------------------
Offset: Instruction:

............

0x747C6 Form Set: Advanced {0E 24 F4 27 4A A0 00 DF 42 4D B5 52 39 51 13 02 11 3D FB 00 DA 00 00 00 00 00 00 00 00 00 01 00 05 00 BC 02}

0x747EA Form: Advanced, Form ID: 0x1 {01 06 01 00 FB 00}

0x747F0 Subtitle: {02 04 DA 00}

0x747F4 Selectable: Boot Configuration, Form ID: 0x21 {0F 0B 21 00 FD 00 FE 00 00 00 00}

0x747FF Selectable: Peripheral Configuration, Form ID: 0x22 {0F 0B 22 00 FF 00 00 01 00 00 00}

0x7480A Selectable: IDE Configuration, Form ID: 0x23 {0F 0B 23 00 01 01 02 01 00 00 00}

0x74815 Selectable: Video Configuration, Form ID: 0x25 {0F 0B 25 00 03 01 04 01 00 00 00}

0x74820 Selectable: USB Configuration, Form ID: 0x26 {0F 0B 26 00 05 01 06 01 00 00 00}

0x7482B Selectable: Chipset Configuration, Form ID: 0x27 {0F 0B 27 00 07 01 08 01 00 00 00}

0x74836 Selectable: ACPI Table/Features Control, Form ID: 0x28 {0F 0B 28 00 09 01 0A 01 00 00 00}

0x74841 Grayout If: {19 03 00}

0x74844 Variable 0x85[1] equals 0x2 {12 07 85 00 01 02 00}

0x7484B Variable 0x86[1] equals 0x1 {12 07 86 00 01 01 00}

0x74852 And {15 02}

0x74854 Setting: Express Card, Variable: 0x1BF[1] {05 09 BF 01 01 F2 01 F3 01}

0x7485D Option: Enabled, Value: 0x1 {09 09 DC 00 01 00 04 B2 00}

0x74866 Option: Disabled, Value: 0x0 {09 09 DB 00 00 00 05 B2 00}
0x7486F End of Op

EDITOR HEX

OFFSET 00 01  02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
000747C0    44 33 00 00 03 00 0E 24 F4 27 4A A0 00 DF 42 4D
000747D0    B5 52 39 51 13 02 11 3D FB 00 DA 00 00 00 00 00
000747E0   00 00 00 00 01 00 05 00 BC 02 01 06 01 00 FB 00 000747F0 02 04 DA 00 0F 0B 21 00 FD 00 FE 00 00 00 00 0F

LLC · 04-30-2020, 03:01 AM

Which tutorial are you using ?
Maybe this will suit you?

leolift · 04-30-2020, 10:11 AM

(04-30-2020, 03:01 AM)LLC Wrote: Which tutorial are you using ?
Maybe this will suit you?

I have a hp 630 with bios insyde ...

I was following a guide by Donovan by making the variables false and therefore I enabled a few functions like eufi boot quiet boot etc ...
looking on the net I found another way to set the variables, one with grub but it doesn't work because I don't have the legacy to use.

the high mode is h2ouve that worked, by directly setting the value 01 on the variable to be enabled.

with this I managed to enable virtualization tecnology ...

however, I can't understand how to change the other types like legacy usb....

Code:
Form: InsydeH2O Setup Utility, Form ID: 0x26 {01 06 26 00 D8 00}
0x75B11 		Subtitle: USB Configuration {02 04 05 01}
0x75B15 		Subtitle:   {02 04 DA 00}
0x75B19 		Grayout If: {19 03 00}
0x75B1C 		Variable 0x85[1] equals 0x2 {12 07 85 00 01 02 00}
0x75B23 		Variable 0x86[1] equals 0x1 {12 07 86 00 01 01 00}
0x75B2A 		And {15 02}
0x75B2C 			Setting: USB Legacy, Variable: 0x4F[1] {05 09 4F 00 01 E6 01 E7 01}
0x75B35 				Option: Disabled, Value: 0x0 {09 09 DB 00 00 00 00 00 00}
0x75B3E 				Option: Enabled, Value: 0x1 {09 09 DC 00 01 00 01 00 00}
0x75B47 			End of Options {10 02}
0x75B49 			Setting: EHCI 1, Variable: 0xF8[1] {05 09 F8 00 01 B8 01 B9 01}
0x75B52 				Option: Disabled, Value: 0x0 {09 09 DB 00 00 00 00 00 00}
0x75B5B 				Option: Enabled, Value: 0x1 {09 09 DC 00 01 00 01 00 00}
0x75B64 			End of Options {10 02}

in this case how is it enabled?where do I find the variable to enable?

with the tool of h2ouve of insyde it is very simple having however a dump obtained from universal extracto passing from the tool of andy ...
my ultimate goal is to enable advanced ipsotations, but if I can't, I also need usb legacy.

leolift · 04-30-2020, 10:59 AM

I noticed that the "Grayout If: {19 03 00}" rule is repeated in fields where there is no direct variable ...

should i work on this?

Code:
Form Set: Advanced {0E 24 F4 27 4A A0 00 DF 42 4D B5 52 39 51 13 02 11 3D FB 00 DA 00 00 00 00 00 00 00 00 00 01 00 05 00 BC 02}
0x747EA 	Form: Advanced, Form ID: 0x1 {01 06 01 00 FB 00}
0x747F0 		Subtitle:   {02 04 DA 00}
0x747F4 		Selectable: Boot Configuration, Form ID: 0x21 {0F 0B 21 00 FD 00 FE 00 00 00 00}
0x747FF 		Selectable: Peripheral Configuration, Form ID: 0x22 {0F 0B 22 00 FF 00 00 01 00 00 00}
0x7480A 		Selectable: IDE Configuration, Form ID: 0x23 {0F 0B 23 00 01 01 02 01 00 00 00}
0x74815 		Selectable: Video Configuration, Form ID: 0x25 {0F 0B 25 00 03 01 04 01 00 00 00}
0x74820 		Selectable: USB Configuration, Form ID: 0x26 {0F 0B 26 00 05 01 06 01 00 00 00}
0x7482B 		Selectable: Chipset Configuration, Form ID: 0x27 {0F 0B 27 00 07 01 08 01 00 00 00}
0x74836 		Selectable: ACPI Table/Features Control, Form ID: 0x28 {0F 0B 28 00 09 01 0A 01 00 00 00}
0x74841 		Grayout If: {19 03 00}
0x74844 		Variable 0x85[1] equals 0x2 {12 07 85 00 01 02 00}
0x7484B 		Variable 0x86[1] equals 0x1 {12 07 86 00 01 01 00}
0x74852 		And {15 02}
0x74854 			Setting: Express Card, Variable: 0x1BF[1] {05 09 BF 01 01 F2 01 F3 01}
0x7485D 				Option: Enabled, Value: 0x1 {09 09 DC 00 01 00 04 B2 00}
0x74866 				Option: Disabled, Value: 0x0 {09 09 DB 00 00 00 05 B2 00}
0x7486F 			End of Options {10 02}
0x74871 		End If {18 02}
0x74873 		Selectable: PCI Express Root Port 1, Form ID: 0x30 {0F 0B 30 00 71 02 72 02 00 00 00}
0x7487E 		Suppress If: {0A 03 00}
0x74881 		Variable 0x121[1] equals 0x0 {12 07 21 01 01 00 00}
0x74888 			Selectable: PCI Express Root Port 2, Form ID: 0x31 {0F 0B 31 00 73 02 74 02 00 00 00}
0x74893 			Selectable: PCI Express Root Port 3, Form ID: 0x32 {0F 0B 32 00 75 02 76 02 00 00 00}
0x7489E 			Selectable: PCI Express Root Port 4, Form ID: 0x33 {0F 0B 33 00 77 02 78 02 00 00 00}
0x748A9 			Selectable: PCI Express Root Port 5, Form ID: 0x34 {0F 0B 34 00 79 02 7A 02 00 00 00}
0x748B4 			Selectable: PCI Express Root Port 6, Form ID: 0x35 {0F 0B 35 00 7B 02 7C 02 00 00 00}
0x748BF 		End If {18 02}
0x748C1 	End Form {0B 02}
0x748C3 	Form: InsydeH2O Setup Utility, Form ID: 0x20 {01 06 20 00 D8 00}
0x748C9 		Subtitle: PCI Configuration {02 04 FC 00}
0x748CD 		Subtitle:   {02 04 DA 00}
0x748D1 		Grayout If: {19 03 00}
0x748D4 		Variable 0x85[1] equals 0x2 {12 07 85 00 01 02 00}
0x748DB 		Variable 0x86[1] equals 0x1 {12 07 86 00 01 01 00}
0x748E2 		And {15 02}
0x748E4 			Setting: PCI Slot3 IRQ Priority, Variable: 0x2[1] {05 09 02 00 01 0E 01 10 01}
0x748ED 				Option: Auto, Value: 0x0 {09 09 DD 00 00 00 05 41 00}
0x748F6 				Option: IRQ3, Value: 0x3 {09 09 11 01 03 00 04 41 00}
0x748FF 				Option: IRQ4, Value: 0x4 {09 09 12 01 04 00 04 41 00}
0x74908 				Option: IRQ5, Value: 0x5 {09 09 13 01 05 00 04 41 00}
0x74911 				Option: IRQ7, Value: 0x7 {09 09 14 01 07 00 04 41 00}
0x7491A 				Option: IRQ9, Value: 0x9 {09 09 15 01 09 00 04 41 00}
0x74923 				Option: IRQ10, Value: 0xA {09 09 16 01 0A 00 04 41 00}
0x7492C 				Option: IRQ11, Value: 0xB {09 09 17 01 0B 00 04 41 00}
0x74935 			End of Options {10 02}

LLC · 05-04-2020, 03:00 AM

May be: H2OUVE.exe -ms -fi "USB Legacy" -op "Enabled" , i'm not sure.
Or do you want to enable the "Advanced" menu with this command ?

leolift · 05-04-2020, 03:21 AM

h2ouve.exe in gui win version, it worked to enable virtualization tecnology, but I, I need to enable advanced settings ... I tried with ida, following a guide by Donovan, but I couldn't, I then tried with fptw.exe for but it doesn't work, I tried with uefitool to extract but it doesn't work ....

I would like to enable advanced settings

Login
Username:
Password:	Lost Password?
	Remember me